Mongtec M6076 — VDI30 driven driven tool holder

M6076 is a driven driven (live) tool holder for the VDI30 turret interface, using ER25 collets, rated to 6,000 rpm and 40 Nm. Mongtec Precision is a Taiwanese brand, designed and engineered in Taichung, Taiwan.

Request a quote for M6076 →

Specification

Article number	M6076
Turret interface	VDI30 — VDI per DIN 69880 (cylindrical shank)
Configuration	VDI Driven Tool Holders
Orientation	Driven
Collet system	ER25
Drive ratio	1:1
Max spindle speed	6,000 rpm
Max torque	40 Nm
Brand	Mongtec Precision Inc. — Taiwanese brand, designed and engineered in Taichung, Taiwan

Source: Mongtec VDI & BMT Driven Tools catalogue, Ver 2026.07.

Range of Mongtec compact driven tool holders for CNC lathe turrets

Mongtec driven tool holder, model M3508, with output spindle and ER collet

Representative photographs of Mongtec driven tooling in this class — production units, not renderings. Shown as examples of the VDI30 family, not as a photograph of M6076 itself.

What M6076 does on the machine

A driven (live) tool holder that takes rotary drive from the turret.

Gear ratio 1:1 — tool spindle speed equals turret drive speed. The direct relationship makes speeds and feeds straightforward to calculate from the machine's live-tool rating.

Do not order against the label alone. “VDI30” fixes the shank per DIN 69880, but pocket depth, clamping system and drive coupling still vary between machine builders. Send Mongtec your machine model and a photograph of the turret face — engineering checks M6076 against the actual turret drawing before anything is quoted. That check is free and takes one email.

Machines with a VDI30 turret

Mongtec publishes tooling pages for these machines with a declared VDI30 turret. Confirming your model here does not confirm M6076 as the article number — that still comes from engineering.

Other VDI30 holders in the same configuration

Article no.	Collet	Ratio	Max speed	Torque
M3316	ER25	1:1	6000 rpm	40 Nm
M5216	ER25	1:1	6000 rpm	40 Nm
M9216	ER25	1:1	6000 rpm	40 Nm

Related VDI30 configurations

M2616 — Axial Tool Head, Square
M2716 — Radial Tool Head, Direct Drive, Right Version
M6816 — Radial Tool Head, Direct Drive, Right Version
M3616 — Radial Tool Head, Indirect Drive, Right Version
M4416 — Axial Tool Head, Square
M4216 — Axial Tool Head, Square
M7516 — Axial Tool Head, Square
M7716 — Axial Tool Head, Round, INT Nut, Through Coolant
M8016 — Axial Tool Head, Round, INT Nut, Through Coolant
M8816 — Axial Tool Head, Round, INT Nut, Through Coolant
M9816 — Axial Tool Head, Round, INT Nut, Through Coolant
M0816 — Radial Tool Head, Indirect Drive, Right Version

Frequently asked

What machines does the Mongtec M6076 fit?

M6076 is built for the VDI30 turret interface. Because VDI shank dimensions follow DIN 69880, but turret pocket depth, clamping system and drive coupling still vary between machine builders. Send Mongtec your machine model and a photo of the turret face and engineering confirms the fit before anything is quoted.

What speed and torque can M6076 run?

M6076 is rated to 6,000 rpm with 40 Nm of torque at a 1:1 drive ratio. The usable figure is whichever is lower: this rating or your machine's live-tool drive rating.

What collet does M6076 take?

M6076 takes ER25 collets. Collets and nuts are supplied separately; specify the shank diameters you intend to run and Mongtec quotes the collet set with the holder.

Is a dimensioned drawing available for M6076?

Yes. Mongtec supplies the full dimensioned drawing for M6076 by email once an enquiry is open, so the drawing is matched to your actual machine and turret configuration rather than a generic sheet.

Get M6076 quoted

Send the machine model, the turret station you want to use and the tools you intend to run. Anything you do not know, Mongtec works out from the machine model — an incomplete enquiry is still worth sending. Dimensioned drawings for M6076 are supplied by email once the enquiry is open.

Request M6076 →

All VDI30 article numbers · How to choose a driven tool holder · All turret interfaces