| Article number | M7056 |
|---|---|
| Turret interface | VDI60 — VDI per DIN 69880 (cylindrical shank) |
| Configuration | Axial Tool Head, Square |
| Orientation | Axial |
| Collet system | ER50 |
| Drive ratio | 1:1 |
| Max spindle speed | 3,800 rpm |
| Max torque | 160 Nm |
| Brand | Mongtec Precision Inc. — Taiwanese brand, designed and engineered in Taichung, Taiwan |
Source: Mongtec VDI & BMT Driven Tools catalogue, Ver 2026.07.
Representative photographs of Mongtec driven tooling in this class — production units, not renderings. Shown as examples of the VDI60 family, not as a photograph of M7056 itself.
The driven spindle points along the Z axis, parallel to the lathe spindle. This is the configuration for face drilling, face tapping and end milling on the part face.
Square body — the most rigid of the axial layouts and the usual first choice where turret clearance allows it.
Gear ratio 1:1 — tool spindle speed equals turret drive speed. The direct relationship makes speeds and feeds straightforward to calculate from the machine's live-tool rating.
Mongtec publishes tooling pages for these machines with a declared VDI60 turret. Confirming your model here does not confirm M7056 as the article number — that still comes from engineering.
| Article no. | Collet | Ratio | Max speed | Torque |
|---|---|---|---|---|
| M8056 | ER50 | 1:1 | 3800 rpm | 100 Nm |
| M1056 | ER50 | 1:1 | 3800 rpm | 200 Nm |
M7056 is built for the VDI60 turret interface. Because VDI shank dimensions follow DIN 69880, but turret pocket depth, clamping system and drive coupling still vary between machine builders. Send Mongtec your machine model and a photo of the turret face and engineering confirms the fit before anything is quoted.
M7056 is rated to 3,800 rpm with 160 Nm of torque at a 1:1 drive ratio. The usable figure is whichever is lower: this rating or your machine's live-tool drive rating.
M7056 takes ER50 collets. Collets and nuts are supplied separately; specify the shank diameters you intend to run and Mongtec quotes the collet set with the holder.
Yes. Mongtec supplies the full dimensioned drawing for M7056 by email once an enquiry is open, so the drawing is matched to your actual machine and turret configuration rather than a generic sheet.
Send the machine model, the turret station you want to use and the tools you intend to run. Anything you do not know, Mongtec works out from the machine model — an incomplete enquiry is still worth sending. Dimensioned drawings for M7056 are supplied by email once the enquiry is open.
All VDI60 article numbers · How to choose a driven tool holder · All turret interfaces