型錄下載｜ Mongtec

型錄下載

各產品線的 PDF 型錄。頁面上的料號與尺寸都是從這些型錄整理出來的；型錄本身若有印刷疑義，我們會在對應頁面標「RFQ 時確認」而不是自行推算。
Mongtec Precision 為台灣品牌，台中設計製造。

關於留白的格子。表格裡印「— RFQ 時確認」的欄位，是型錄本身印刷有問題、我們無法確認的數字。能與其他印得正確的頁面兩相對照確認的才填回去；只要有一個環節無法證明就留白 — 我們不猜。

規格與料號

Shrink Fit Toolholder (PDF)	BT, BBT, SK, CAT and HSK shrink fit chucks. 4.5° standard, 4.5° through-coolant and 3° slim, bores 3–32 mm and 1/8″–1-1/4″, balanced G2.5/25,000 rpm. Includes extensions, modular heads, shrink ER collets and the induction machine.
Hydraulic Toolholder (PDF)	Hydraulic chucks in BT, BBT, SK, CAT, HSK and MTB. Standard, power, 3° slim, mould, grinding, short and Swiss-type forms, plus reducing sleeves from 3 to 25 mm. Actuates with a hex key.
BT / BBT Tooling System (PDF)	Twenty-five holder types on BT and BBT tapers to JIS B 6339: ER, power milling, OZ, TG, SKS, face mill (metric and inch), Weldon, whistle notch, adapters, drill and tapping chucks, test arbors. Taper tolerance tighter than AT3, HRC 56–60, Ra below 0.2 µm.
HSK-A Tooling System (PDF)	The HSK-A range from HSK32A to HSK100A, balanced G2.5 at 25,000 rpm throughout. ER, power milling, face mill, Weldon, whistle notch at 2°, Morse adapters, HSK-A to HSK-C sleeves.
HSK-T Tooling System (PDF)	HSK-T turning tools for mill-turn centres and multi-axis lathes: boring bar holders, square-shank blocks and 38 integral ISO 5608 turning tool designations in HSK40T to HSK100T.
Coolant Powered Gripper (PDF)	Bar gripper driven by the machine coolant line or compressed air. Clamps 0 to 80 mm at 0.5 bar, withstands 280 psi, carbide-tipped jaws, holds hexagonal stock.
Zero Nut (PDF)	ER16 to ER40 collet nut with six precision adjusting screws. Corrects spindle or holder misalignment to a target runout of 0.002 mm, made to work with AA grade collets.

BT, BBT, SK, CAT and HSK shrink fit chucks. 4.5° standard, 4.5° through-coolant and 3° slim, bores 3–32 mm and 1/8″–1-1/4″, balanced G2.5/25,000 rpm. Includes extensions, modular heads, shrink ER collets and the induction machine.

Hydraulic Toolholder (PDF)

Hydraulic chucks in BT, BBT, SK, CAT, HSK and MTB. Standard, power, 3° slim, mould, grinding, short and Swiss-type forms, plus reducing sleeves from 3 to 25 mm. Actuates with a hex key.

BT / BBT Tooling System (PDF)

Twenty-five holder types on BT and BBT tapers to JIS B 6339: ER, power milling, OZ, TG, SKS, face mill (metric and inch), Weldon, whistle notch, adapters, drill and tapping chucks, test arbors. Taper tolerance tighter than AT3, HRC 56–60, Ra below 0.2 µm.

HSK-A Tooling System (PDF)

The HSK-A range from HSK32A to HSK100A, balanced G2.5 at 25,000 rpm throughout. ER, power milling, face mill, Weldon, whistle notch at 2°, Morse adapters, HSK-A to HSK-C sleeves.

HSK-T Tooling System (PDF)

HSK-T turning tools for mill-turn centres and multi-axis lathes: boring bar holders, square-shank blocks and 38 integral ISO 5608 turning tool designations in HSK40T to HSK100T.

Coolant Powered Gripper (PDF)

Bar gripper driven by the machine coolant line or compressed air. Clamps 0 to 80 mm at 0.5 bar, withstands 280 psi, carbide-tipped jaws, holds hexagonal stock.

Zero Nut (PDF)

ER16 to ER40 collet nut with six precision adjusting screws. Corrects spindle or holder misalignment to a target runout of 0.002 mm, made to work with AA grade collets.

Centers, Face Drivers and Pipe Centers	Rotary and fixed centers, MFC face drivers and pipe centers on Morse tapers MT2 to MT6. Runout 0.003 mm live and 0.002 mm dead, triplex bearings, carbide points at HRA 90–91.

Centers, Face Drivers and Pipe Centers

Rotary and fixed centers, MFC face drivers and pipe centers on Morse tapers MT2 to MT6. Runout 0.003 mm live and 0.002 mm dead, triplex bearings, carbide points at HRA 90–91.

型錄下載

規格與料號

相關頁面