CatalogueProductsMachinesAngle HeadsTool HoldersGuidesGet a Quotemongtec-tools.com ↗

Live Tooling & Tool Holders for Doosan / DN Solutions CNC Lathes

Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, supplies BMT and VDI (DIN 69880) driven tool holders, static holders and quick-change tooling for Doosan CNC lathes and turning centers. Doosan Machine Tools was rebranded as DN Solutions in 2022 — the model list below covers both badges. Select your machine, or contact engineering if your model is not listed — interface dimensions are confirmed per machine at RFQ.

Supported Doosan models (77)

Doosan Machine Tools was rebranded as DN Solutions in 2022; current DN Solutions Puma, Lynx and SMX turning centers share these turret platforms. Turret interface shown where documented on the individual machine page (76 of 52 models). Entries marked “Confirmed at RFQ” are supplied after Mongtec engineering checks the actual turret configuration.

ModelTurret interface
Lynx 220 LMS/LY/LSYConfirmed at RFQ
Lynx 220 M/LMConfirmed at RFQ
Lynx 300 MConfirmed at RFQ
Lynx 2600 Y/SYConfirmed at RFQ
Puma 230 / 240 / 280 M/MS/LMConfirmed at RFQ
Puma 300 M/MSConfirmed at RFQ
Puma 400 / 480 M/LMConfirmed at RFQ
Puma 600 / 700 / 800 M/LM/LYConfirmed at RFQ
Puma 1500 / 2000 / 2500 M/MS/Y/SYConfirmed at RFQ
Puma 2100 M/MS/Y/SY (12-station)BMT55
Puma 2100 M/MS/Y/SY (24-station)BMT55
Puma 2100 / 2600 M(S)/(S)Y (12-station)BMT65
Puma 2100 / 2600 M(S)/(S)Y (24-station)BMT65
Puma 3100 M/Y/MY (12-station)BMT65
Puma 5100 M/LYConfirmed at RFQ
Puma GT2100 / 2600 MConfirmed at RFQ
Puma Inverturn 3000 MConfirmed at RFQ
Puma MX1600 STBMT45
Puma MX1600 / 2100 STBMT55
Puma MX2000 / 2500 / 2600 T/ST/SYConfirmed at RFQ
Puma S400 MConfirmed at RFQ
Puma TL2000 / 2500 MConfirmed at RFQ
Puma TT1300 SY/SYYBMT45
Puma TT1500 / 1800 MS/SYConfirmed at RFQ
Puma TT2100 SY/SYYBMT55
Puma TT2000 / 2500 MS/SYConfirmed at RFQ
Puma V400 MConfirmed at RFQ
Puma V550 MConfirmed at RFQ
Puma VT450 M / VT450 M-2SPConfirmed at RFQ
Puma VT750 M / M-2SPConfirmed at RFQ
Puma VT900 M / M-2SPConfirmed at RFQ
Puma VT1100 MConfirmed at RFQ
Lynx 2100 LMSA/LMSBBMT45
Lynx 2100 MA/MB/LMA/LMBBMT45
Puma 2600BMT65
Puma 300 MSB/MSCBMT65
Puma 350M/350LMBMT75
Puma 400LMBMT75
Puma 400MBMT75
Puma 4100 M/LYBMT75
Puma HT 250 TMVDI30
Puma MX 2100BMT55
Puma MX 2500BMT65
Puma MX 2600BMT65
Puma MX 3100BMT65
Puma TT 1500 MS/SYBMT55
Puma TT 1800 MS/SYBMT55
Puma TT 2500BMT65
Puma TT 2500 MS/SYBMT65
Dooturn S 240 LMConfirmed at RFQ
Dooturn S 390 LMConfirmed at RFQ
Dooturn Z 290 M/SMConfirmed at RFQ
Lynx 2100 LSYA - 12-fach RevolverConfirmed at RFQ
Lynx 2100 LSYA - 16-fach RevolverConfirmed at RFQ
Lynx 2100 LSYB - 12-fach RevolverConfirmed at RFQ
Lynx 2100 LSYB - 16-fach RevolverConfirmed at RFQ
Lynx 220 LM/MConfirmed at RFQ
Lynx 220 LMSA/LMSCConfirmed at RFQ
Lynx 220 LY/LSYConfirmed at RFQ
Lynx 300 LM/MConfirmed at RFQ
Puma 1500 MSYConfirmed at RFQ
Puma 2000 MSYConfirmed at RFQ
Puma 230 MBConfirmed at RFQ
Puma 230 MCConfirmed at RFQ
Puma 240 MA/MB/MCConfirmed at RFQ
Puma 2500 MSYConfirmed at RFQ
Puma 280 MConfirmed at RFQ
Puma 480M/480LM/480XLMConfirmed at RFQ
Puma GT 2100 M/LMConfirmed at RFQ
Puma GT 2600 M/LMConfirmed at RFQ
S 310 SMLConfirmed at RFQ
Z 290SM - SauterConfirmed at RFQ
Z 290SMY oberer Rev. - SauterConfirmed at RFQ
Z 290SMY unterer Rev. - SauterConfirmed at RFQ

Mongtec driven tool line — at a glance

Figures below are Mongtec's own published line specifications (mongtec-tools.com, accessed 2026-07-20). They describe the capability range of the product line; the rating of a specific unit for a specific machine is confirmed by Mongtec engineering at RFQ.

Turret interfaces suppliedBMT (face-and-taper), VDI polygonal shank to DIN 69880, and PSC polygon shank coupling to ISO 26623
Driven tool speed6,000–12,000 rpm standard; up to 32,000 rpm with speed increaser
Max torqueUp to 160 Nm (line capability; unit rating confirmed at RFQ)
CoolantInternal / external, up to 100 bar
Runout≤0.003 mm published for the Mazak-compatible 0° driven tool line; other families confirmed at RFQ
Bearings / gearingImported P4/P5 precision bearings; precision-ground spiral bevel gear pairs
Product typesDriven holders (axial / radial / adjustable-angle), static holders, boring bar holders, custom configurations
ManufacturingTaiwan; every driven unit ships with an individual inspection report
Lead timeNo blanket published figure — quoted per order after interface, quantity and customisation are reviewed
On turret standards: VDI is codified in DIN 69880 and the PSC polygon shank coupling in ISO 26623. BMT (Base Mounted Turret) is a widely adopted de facto industry interface but is not published by ISO or DIN — two turrets both labelled “BMT65” can differ in detail between machine builders. Mongtec therefore verifies the actual turret dimensions of the stated machine before confirming fitment.

Mongtec static turret toolholders

The Mongtec Static Turret Toolholders, Ver 2026.07 catalogue names this machine platform for turret sizes BMT40, BMT45, BMT55, BMT65, BMT75. Published static (non-driven) holders — OD, double-OD, ID and face types:

Ordering codes are machine-builder specific. The designations below identify the holder type and its dimensions. Because mounting details differ between machine builders even within the same nominal turret size, the same BMT specification can carry a different Mongtec article code depending on the machine it is built for — Mongtec engineering assigns the correct code for your machine at RFQ.

TurretHolder typeType designationCKGHXABEWeight
BMT40ODC552075975525251250602.20 kg
BMT40IDB602563948260251250603.20 kg
BMT45ODC6020751106020201558582.49 kg
BMT45ODC7020851107020201558583.43 kg
BMT45ODC8025851108025251558583.92 kg
BMT45IDB604075958860401558583.50 kg
BMT45IDB653275958865321558583.35 kg
BMT45IDB8032759511080321558584.43 kg
BMT45FaceF602075856020201558582.26 kg
BMT45FaceF703290867032321558583.20 kg
BMT45FaceF802075858020201558583.04 kg
BMT45FaceF852590868525251558583.82 kg
BMT55ODC6020901156020201564643.29 kg
BMT55ODC8020861208020201564644.34 kg
BMT55ODC8025951208025251564644.30 kg
BMT55ODC8032861208032321564644.34 kg
BMT55Double ODC8020921208020211564645.60 kg
BMT55IDB6032861059060321564645.10 kg
BMT55IDB6040861059060401564645.10 kg
BMT55IDB70328610510070321564645.96 kg
BMT55IDB70408610510070401564644.90 kg
BMT55IDB80328610510980321564645.80 kg
BMT55IDB85408610511585401564645.80 kg
BMT55FaceF702090957020201564643.51 kg
BMT55FaceF702586957025251564643.35 kg
BMT55FaceF803286958032321564643.82 kg
BMT55FaceF852092958520201564644.06 kg
BMT55FaceF852592958525251564644.45 kg
BMT65ODC7520961317520201873704.97 kg
BMT65ODC7525951317525251873704.97 kg
BMT65ODC8025951318025251873705.25 kg
BMT65Double ODC7520971317520211873706.10 kg
BMT65IDB6032861059060321564645.10 kg
BMT65IDB6040861059060401564645.10 kg
BMT65IDB70328610510070321564645.96 kg
BMT65IDB70408610510070401564644.90 kg
BMT65IDB80328610510980321564645.80 kg
BMT65IDB85408610511585401564645.80 kg
BMT65FaceF7025951067025251893704.13 kg
BMT65FaceF9525961059525251873705.62 kg
BMT75ODC85251121408525252590907.00 kg
BMT75ODC8032112152.58030322590907.14 kg
BMT75IDB905011212013090502590909.80 kg
BMT75IDB11050112115150110502590909.80 kg
BMT75IDB1106011213511561106025909012.30 kg
BMT75FaceF70251121357025252590906.20 kg
BMT75FaceF70321121207032322590905.46 kg
BMT75FaceF12225112135122252525909010.76 kg
BMT75FaceF13532112120135323225909010.61 kg

Dimensions in mm, from the Mongtec Static Turret Toolholders, Ver 2026.07 catalogue. This is the published range for those turret sizes, not a confirmed fit for a specific machine configuration — Mongtec engineering verifies interface dimensions, clearance, shank size and the correct article code per machine at RFQ. Ask engineering to confirm →

FAQ

Is Doosan the same as DN Solutions?
Doosan Machine Tools was rebranded as DN Solutions in 2022. The turret platforms carried over, so the model list on this page applies to both the Doosan-badged and the DN Solutions-badged machines. See the DN Solutions page if your machine carries the newer name.
Which BMT size does my Puma use?
It varies by model and turret station count. From the models documented here: Puma MX1600 ST and TT1300 SY/SYY are listed with BMT45; Puma 2100 M/MS/Y/SY, MX1600/2100 ST and TT2100 SY/SYY with BMT55; Puma 2100/2600 M(S)/(S)Y and 3100 M/Y/MY with BMT65. The remaining models are confirmed per configuration at RFQ — send the model designation and station count.
Will a Mongtec driven tool holder fit my Doosan turret?
Mongtec supplies on the same open machine-side standards Doosan turrets use — BMT face-and-taper, VDI polygonal shank to DIN 69880, and PSC polygon coupling to ISO 26623. Because BMT is a de facto rather than an ISO/DIN standard, fitment is confirmed per machine: send the model designation and turret station count (a photo of the turret face or the machine spec sheet helps) and Mongtec engineering will confirm before quoting.
My Doosan model is not in the list above — can you still supply?
In most cases yes. The list covers models already documented by Mongtec; it is not the limit of what Mongtec can supply. Custom and special-configuration units are a standard part of the line. Send the model and turret details via the RFQ link and engineering will confirm feasibility and lead time.
What is the lead time?
Mongtec does not publish a blanket lead time. It is quoted per order once interface, quantity and any customisation are reviewed. Request a quote for a project-specific answer.
Do you supply static holders and boring bar holders as well as driven tools?
Yes. Static holders, boring bar holders and custom builds are supplied on the same turret interfaces as the driven units.
What quality documentation ships with the tooling?
Every driven unit ships with an individual inspection report. The line uses imported P4/P5 precision bearings and precision-ground spiral bevel gear pairs; runout of ≤0.003 mm is published for the Mazak-compatible 0° driven tool line, with figures for other families confirmed at RFQ.
Does Mongtec repair driven tools from other brands used on Doosan machines?
Mongtec's Taiwan service centre works on driven tool holders and angle heads. Whether a specific third-party brand and model is covered is confirmed case by case on request.

Additional Doosan / DN Solutions models covered

Mongtec supplies BMT and VDI driven and static tool holders across the DN Solutions (formerly Doosan) turning-center range. Published BMT sizes are noted where available; the exact interface for a given build is confirmed at RFQ.

Lynx: Lynx 2100 (10/12ST); Lynx 2100 M/MS/LY/LSY; Lynx 300M; Lynx 2600 (10/12ST); Lynx 2600 SY (12ST); Lynx 2600 Y/SY (16ST).

Puma GT: Puma GT2100 / 2600 (10ST) & GT2600 (12ST); Puma GT2100 (12ST); Puma GT3100 M.

Puma (horizontal turret): Puma 2100 / 2600; Puma 2100,2600 (II) M/MS/Y/SY (BMT55); (BMT65); Puma 2100,2600 Y/SY (16ST, BMT55); Puma 3100 M/Y/SY; Puma 4100 / 5100 M/LM/LY; Puma 600 / 700 / 800 M/LM/LY.

Puma DNT: Puma DNT 2100; DNT 2600; DNT 2100 / 2600 (BMT55); (BMT65).

Puma MX / SMX (multitasking): Puma MX1600 ST (BMT45); MX1600 / 2100 ST (BMT55); MX2600 T/ST; SMX2100 ST; SMX2600 / 3100 ST.

Puma ST GS II / TL / TW: Puma ST20GS II / ST26GS II; ST32GS II / ST35GS II / ST38GS II; Puma TL2000 / 2500 M; Puma TW2100 M; TW2600 M.

Puma TT (twin-turret): Puma TT1300 SY/SYY; TT1800 / 2100 MS/SY/SYY; TT2500 MS/SY.

Vertical & DST: Puma V400; V400 M; V8300 M; V8300 M (ATC); (P)V9300; (P)V9300 M / VT900 M; VT1100 M; PV 6300 ML/MR; DST 20/26; DST 20/26Y.

Mongtec resources for Doosan users

Request a quote