Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, supplies driven tool holders and static tooling for the Doosan Lynx 220 LMS/LY/LSY on the open machine-side BMT and VDI (DIN 69880) standards. The turret interface for this model is confirmed per machine configuration by Mongtec engineering at RFQ.
| Machine brand | Doosan |
|---|---|
| Model | Lynx 220 LMS/LY/LSY |
| Turret interface | BMT45 (cross-referenced from published tooling sources; confirmed against the actual turret drawing at RFQ) |
| Driven tool line speed | 6,000–12,000 rpm standard (up to 32,000 rpm with speed increaser) |
| Max torque | Up to 160 Nm (line capability; unit rating confirmed at RFQ) |
| Coolant | Internal / external, up to 100 bar |
| Runout | ≤0.003 mm (0° axial driven line) |
Same model, different turret: station count, model suffix and build year change the turret interface. Mongtec confirms the interface from the machine model and a turret photo before quoting.
TOOL HOLDER SELECTION GUIDE Ver 2026.08 (PDF, 2.6 MB)
Models listed in this catalogue section: LYNX 220 A,B,C / LYNX 2100 / PUMA GT2100 (12ST) / LYNX 220 LSA,LSC / PUMA 240 A,B,C,LC · PUMA 400A,LA,XLA / / PUMA 400B,C,LB,LC,XLB,XLC · PUMA GT3100,L,XL,UL (10 & 12 STATION )
| Article no. | Tool clamping | What it does on the machine |
|---|---|---|
| M84735 | 25 | Facing & face grooving |
| M56265 | Ø40 | Boring, U-drilling & ID grooving |
| M36935 | 32 | Facing & face grooving |
| M10935 | Ø60 | Boring, U-drilling & ID grooving |
| M06465 | 32 | Facing & face grooving |
| M85465 | Ø60 | Boring, U-drilling & ID grooving |
Article numbers shown as links have a specification page with the catalogue drawing. The rest are published in the Mongtec selection guide; Mongtec confirms the final article number against your turret drawing at RFQ.
| Article no. | Tool clamping | What it does on the machine |
|---|---|---|
| M97084 | 20 | 180° reversible — Facing & face grooving |
| M53284 | 20 | 180° reversible — Facing & face grooving |
| M87084 | 20 | 180° reversible — OD turning, threading, parting & grooving |
| M64784 | 20 | 180° reversible — OD turning, threading, parting & grooving |
| M16284 | 20 | 180° reversible — OD turning, threading, parting & grooving |
| M85284 | 20 | 180° reversible — OD turning, threading, parting & grooving |
| M03185 | 20 | OD turning, threading, parting & grooving |
| M63284 | 20 | OD turning, threading, parting & grooving |
| M95284 | 20 | OD turning, threading, parting & grooving |
| M82185 | Ø20 | 180° reversible — Boring, U-drilling & ID grooving |
| M44384 | Ø25 | 180° reversible — Boring, U-drilling & ID grooving |
| M94084 | Ø32 | 180° reversible — Boring, U-drilling & ID grooving |
| M49084 | Ø40 | 180° reversible — Boring, U-drilling & ID grooving |
| M14384 | Ø32 | 180° reversible — Boring, U-drilling & ID grooving |
| M92185 | Ø32 | 180° reversible — Boring, U-drilling & ID grooving |
| M26284 | Ø32 | 180° reversible — Boring, U-drilling & ID grooving |
| M51184 | SH26 WIDTH 26 | 180° reversible — OD turning, threading, parting & grooving |
| M61185 | SH26 WIDTH 26 | 180° reversible — OD turning, threading, parting & grooving |
| M09084 | SH26 WIDTH 26 | 180° reversible — OD turning, threading, parting & grooving |
| M4107 | ER25 1-16 | Axial (0°) drilling & milling |
| M1007 | ER25 1-16 | Axial (0°) drilling & milling |
| M2007 | ER25 1-16 | 180° reversible — Radial (90°) face drilling & milling |
Article numbers with a specification page on this site: M0407, M2007, M3307, M6007, M7001, M7014, M8007, M8307, M9407
Mongtec also supplies BMT40, BMT60, BMT68 and BMT80 holders and builder-specific interfaces (Mazak, Nakamura-Tome, Haas BOT, Okuma BOT, Muratec BOT) — the 228 article numbers published here are a subset of the range. Mongtec tooling is exported to five continents and supplied to machine-tool builders. Lead time is confirmed per item and quantity at quotation.
Request a quote for this machine
Mongtec supplies BMT and VDI (DIN 69880) driven tool holders and static tooling compatible with the Doosan turret platform. Interface: BMT45. The exact configuration is confirmed by Mongtec engineering at RFQ.
Yes. BMT and VDI are open machine-side standards, so switching supplier does not require any turret modification. Mongtec also publishes cross-reference pages for WTO, Heimatec, EWS, Eppinger, BIG and other brands.
Lead time is quoted per order and ships from Taichung, Taiwan.
A selection of Mongtec BMT45 driven tool holder article numbers. This is a starting point, not a confirmed fit — the exact turret drawing is verified at RFQ. See all 7 BMT45 article numbers →
| Article no. | Orientation | Collet | Max speed | Torque |
|---|---|---|---|---|
| M6007 | Axial | ER25 | 6,000 rpm | 40 Nm |
| M7001 | Axial | ER25 | 8,000 rpm | 40 Nm |
| M7014 | Axial | ER25 | 6,000 rpm | 40 Nm |
| M2007 | Radial | ER25 | 8,000 rpm | 40 Nm |
| M3307 | Radial | ER25 | 8,000 rpm | 40 Nm |
| M8007 | Radial | ER20 | 8,000 rpm | 25 Nm |
Static BMT45 turret tooling for this machine →
Yes — Mongtec supplies driven and static tool holders for this turret. A BOT (bolt-on turret) holder mounts directly to the turret face, so it is built to the Doosan bolt pattern rather than to a BMT or VDI size. Mongtec supplies these regularly for DN Solutions / Doosan machines.
Turret coverage: Doosan Lynx 220 A, B, C · Lynx 220 LSA, LSC · Lynx 2100 · Puma GT2100 (12 ST) · Puma 240 A, B, C, LC · Puma 400A, LA, XLA · Puma 400B, C, LB, LC, XLB, XLC · Puma GT3100 L, XL, UL (10 & 12 station).
Mongtec driven and static tool holders are exported worldwide across five continents, and are supplied to machine tool manufacturers as well as to end users. Lead time is confirmed against the items and quantity you need.
To quote we need: the machine model and turret designation, the station count, a turret interface drawing or a clear photo of the turret face, the holder orientation (axial or radial) and the clamping or collet size you need, and the quantity. A drawing of the holder you are replacing works just as well.
Email info@mongtec.com to discuss your application and request drawings, or send an enquiry here. Mongtec engineering confirms the fit against your turret before quoting.
All 228 article numbers with full specification · How to choose a driven tool holder · PSC / ISO 26623 tooling
Machine builders regularly ship the same model with different turrets — station count, model suffix and the number of keys all change the mounting. The Hardinge Conquest H51 is BMT55 in the 12-station build and BMT45 in the 16-station build; the Okuma GENOS L300 M is VDI40, while the L300 MW/MYW uses a 65×73 mm bolt pattern. This is the single most common reason a driven tool holder arrives and will not bolt on. BMT bolt pattern reference — 38 patterns by machine builder →
Send your model and a photo of the turret face — we confirm the fit before quoting →
Whether a holder mounts is decided by the turret bolt pattern and the drive coupling, not by the machine name alone. The types below are published by Mongtec for this interface; the exact article number is confirmed against the actual turret drawing at RFQ.
BMT45 article numbers · BMT bolt pattern reference (38 patterns) · All driven tool types and turret interfaces