Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, designs and engineers driven tool holders (live tooling) and static tooling for the Doosan / DN Solutions Lynx 2100 series. The Lynx 2100 is built with more than one turret, so the right holder depends on the variant on your nameplate. This page lists every Lynx 2100 variant Mongtec covers, with its turret interface; Mongtec engineering confirms the fit against the actual turret drawing at RFQ, free of charge.
| Variant | Turret interface |
|---|---|
| Lynx 2100 MA / MB / LMA / LMB | BMT45 |
| Lynx 2100 LMSA / LMSB | BMT45 |
| Lynx 2100 LSYA — 12-station turret | BOT (listed in the selection guide) |
| Lynx 2100 LSYA — 16-station turret | BOT (listed in the selection guide) |
| Lynx 2100 LSYB — 12-station turret | BOT (listed in the selection guide) |
| Lynx 2100 LSYB — 16-station turret | BOT (listed in the selection guide) |
| Lynx 2100 (base model, no live tooling) | BOT — static tooling, see the BOT section below |
BMT45 is published for these models in machine-specific tooling catalogues; BOT is the interface under which Mongtec’s TOOL HOLDER SELECTION GUIDE Ver 2026.08 lists them. Doosan Machine Tools was rebranded as DN Solutions in 2022 — the same turret takes the same tooling under either badge.
Read the full model name from the machine nameplate, including the letters after “2100”. On Doosan lathes the suffix letters usually indicate the chuck size, a long bed, milling (driven tools), a sub-spindle or a Y-axis — and those are exactly the options that change the turret. Then count the turret stations. With the full model name, the station count and one photo of the turret face, Mongtec can confirm the interface in one email.
Send your Lynx 2100 model and a turret photo — we confirm the fit before quoting →
Same model, different turret: station count, model suffix and build year change the turret interface. Mongtec confirms the interface from the machine model and a turret photo before quoting.
TOOL HOLDER SELECTION GUIDE Ver 2026.08 (PDF, 2.6 MB)
Models listed in this catalogue section: LYNX 220 A,B,C / LYNX 2100 / PUMA GT2100 (12ST) / LYNX 220 LSA,LSC / PUMA 240 A,B,C,LC · PUMA 400A,LA,XLA / / PUMA 400B,C,LB,LC,XLB,XLC · PUMA GT3100,L,XL,UL (10 & 12 STATION )
| Article no. | Tool clamping | What it does on the machine |
|---|---|---|
| M84735 | 25 | Facing & face grooving |
| M56265 | Ø40 | Boring, U-drilling & ID grooving |
| M36935 | 32 | Facing & face grooving |
| M10935 | Ø60 | Boring, U-drilling & ID grooving |
| M06465 | 32 | Facing & face grooving |
| M85465 | Ø60 | Boring, U-drilling & ID grooving |
Article numbers shown as links have a specification page with the catalogue drawing. The rest are published in the Mongtec selection guide; Mongtec confirms the final article number against your turret drawing at RFQ.
| Article no. | Tool clamping | What it does on the machine |
|---|---|---|
| M97084 | 20 | 180° reversible — Facing & face grooving |
| M53284 | 20 | 180° reversible — Facing & face grooving |
| M87084 | 20 | 180° reversible — OD turning, threading, parting & grooving |
| M64784 | 20 | 180° reversible — OD turning, threading, parting & grooving |
| M16284 | 20 | 180° reversible — OD turning, threading, parting & grooving |
| M85284 | 20 | 180° reversible — OD turning, threading, parting & grooving |
| M03185 | 20 | OD turning, threading, parting & grooving |
| M63284 | 20 | OD turning, threading, parting & grooving |
| M95284 | 20 | OD turning, threading, parting & grooving |
| M82185 | Ø20 | 180° reversible — Boring, U-drilling & ID grooving |
| M44384 | Ø25 | 180° reversible — Boring, U-drilling & ID grooving |
| M94084 | Ø32 | 180° reversible — Boring, U-drilling & ID grooving |
| M49084 | Ø40 | 180° reversible — Boring, U-drilling & ID grooving |
| M14384 | Ø32 | 180° reversible — Boring, U-drilling & ID grooving |
| M92185 | Ø32 | 180° reversible — Boring, U-drilling & ID grooving |
| M26284 | Ø32 | 180° reversible — Boring, U-drilling & ID grooving |
| M51184 | SH26 WIDTH 26 | 180° reversible — OD turning, threading, parting & grooving |
| M61185 | SH26 WIDTH 26 | 180° reversible — OD turning, threading, parting & grooving |
| M09084 | SH26 WIDTH 26 | 180° reversible — OD turning, threading, parting & grooving |
| M4107 | ER25 1-16 | Axial (0°) drilling & milling |
| M1007 | ER25 1-16 | Axial (0°) drilling & milling |
| M2007 | ER25 1-16 | 180° reversible — Radial (90°) face drilling & milling |
Article numbers with a specification page on this site: M0407, M2007, M3307, M6007, M7001, M7014, M8007, M8307, M9407
Mongtec also supplies BMT40, BMT60, BMT68 and BMT80 holders and builder-specific interfaces (Mazak, Nakamura-Tome, Haas BOT, Okuma BOT, Muratec BOT) — the 228 article numbers published here are a subset of the range. Mongtec tooling is exported to five continents and supplied to machine-tool builders. Lead time is confirmed per item and quantity at quotation.
It depends on the variant. Machine-specific tooling catalogues publish the Lynx 2100 MA/MB/LMA/LMB and the Lynx 2100 LMSA/LMSB with a BMT45 turret. The Lynx 2100 base model and the LSYA/LSYB 12- and 16-station builds are listed under the Doosan BOT turret in Mongtec's TOOL HOLDER SELECTION GUIDE. Mongtec confirms the interface against the actual turret drawing before quoting; that check is free.
Yes. Mongtec, a Taiwanese tooling brand headquartered in Taichung, supplies BMT45 driven tool holders (axial, radial, offset, speed increasers and more) and BOT static holders for the Lynx 2100 series. Send the machine model, station count and a photo of the turret face for a quote.
Yes. Doosan Machine Tools was rebranded as DN Solutions in 2022. Lynx 2100 machines carry either badge; the tooling interface is the same for the same turret.
The full model name from the nameplate (including suffix letters), the station count, a photo of the turret face, the operation and the quantity.
A selection of Mongtec BMT45 driven tool holder article numbers. This is a starting point, not a confirmed fit — the exact turret drawing is verified at RFQ. See all 7 BMT45 article numbers →
| Article no. | Orientation | Collet | Max speed | Torque |
|---|---|---|---|---|
| M7001 | Axial | ER25 | 8,000 rpm | 40 Nm |
| M7014 | Axial | ER25 | 6,000 rpm | 40 Nm |
| M2007 | Radial | ER25 | 8,000 rpm | 40 Nm |
| M8007 | Radial | ER20 | 8,000 rpm | 25 Nm |
All Doosan models · Driven tool holder types and turret interfaces · Published article numbers · Static turret tooling · Selection guide
Machine builders regularly ship the same model with different turrets — station count, model suffix and the number of keys all change the mounting. The Hardinge Conquest H51 is BMT55 in the 12-station build and BMT45 in the 16-station build; the Okuma GENOS L300 M is VDI40, while the L300 MW/MYW uses a 65×73 mm bolt pattern. This is the single most common reason a driven tool holder arrives and will not bolt on. BMT bolt pattern reference — 38 patterns by machine builder →
Send your model and a photo of the turret face — we confirm the fit before quoting →
Whether a holder mounts is decided by the turret bolt pattern and the drive coupling, not by the machine name alone. The types below are published by Mongtec for this interface; the exact article number is confirmed against the actual turret drawing at RFQ.
BMT45 article numbers · BMT bolt pattern reference (38 patterns) · All driven tool types and turret interfaces