Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, supplies driven tool holders and static tooling for the Doosan Puma 5100 M/LY on the open machine-side BMT and VDI (DIN 69880) standards. The turret interface for this model is confirmed per machine configuration by Mongtec engineering at RFQ.
| Machine brand | Doosan |
|---|---|
| Model | Puma 5100 M/LY |
| Turret interface | BMT75 (cross-referenced from published tooling sources; confirmed against the actual turret drawing at RFQ) |
| Driven tool line speed | 6,000–12,000 rpm standard (up to 32,000 rpm with speed increaser) |
| Max torque | Up to 160 Nm (line capability; unit rating confirmed at RFQ) |
| Coolant | Internal / external, up to 100 bar |
| Runout | ≤0.003 mm (0° axial driven line) |
Same model, different turret: station count, model suffix and build year change the turret interface. Mongtec confirms the interface from the machine model and a turret photo before quoting.
TOOL HOLDER SELECTION GUIDE Ver 2026.08 (PDF, 2.6 MB)
What the PDF guide says: The TOOL HOLDER SELECTION GUIDE lists DN Solutions / Doosan under BMT45, BMT55, BMT65 and BMT75, but does not name the Doosan Puma 5100 M/LY. The BMT75 shown on this page is a cross-reference — send a photo of the turret face and Mongtec confirms the interface free of charge.
| Article no. | Tool clamping | What it does on the machine |
|---|---|---|
| M20084 | 25 | 180° reversible — Facing & face grooving |
| M68684 | 32 | 180° reversible — Facing & face grooving |
| M40084 | Ø50 | 180° reversible — Boring, U-drilling & ID grooving |
| M30084 | Ø60 | 180° reversible — Boring, U-drilling & ID grooving |
| M65284 | Ø60 | 180° reversible — Boring, U-drilling & ID grooving |
| M17684 | Ø60 | 180° reversible — Boring, U-drilling & ID grooving |
| M10084 | 25 | 180° reversible — OD turning, threading, parting & grooving |
| M50084 | 32 | 180° reversible — OD turning, threading, parting & grooving |
| M43484 | 25 | 180° reversible — OD turning, threading, parting & grooving |
| M53484 | 32 | 180° reversible — OD turning, threading, parting & grooving |
| M47684 | 32 | 180° reversible — OD turning, threading, parting & grooving |
| M83484 | 32 | 180° reversible — OD turning, threading, parting & grooving |
| M1037 | ER32 2-20 | Axial (0°) drilling & milling |
| M3037 | ER40 3-26 | Axial (0°) drilling & milling |
| M8037 | ER40 3-26 | 180° reversible — Radial (90°) face drilling & milling |
| M5037 | ER40 3-26 | 180° reversible — Radial (90°) face drilling & milling |
| M9037 | ER40 3-26 | 180° reversible — Radial (90°) face drilling & milling |
Article numbers shown as links have a specification page with the catalogue drawing. The rest are published in the Mongtec selection guide; Mongtec confirms the final article number against your turret drawing at RFQ.
Article numbers with a specification page on this site: M1037, M1137, M3037, M5037, M7037, M7137
Mongtec also supplies BMT40, BMT60, BMT68 and BMT80 holders and builder-specific interfaces (Mazak, Nakamura-Tome, Haas BOT, Okuma BOT, Muratec BOT) — the 228 article numbers published here are a subset of the range. Mongtec tooling is exported to five continents and supplied to machine-tool builders. Lead time is confirmed per item and quantity at quotation.
Request a quote for this machine
Mongtec supplies BMT and VDI (DIN 69880) driven tool holders and static tooling compatible with the Doosan turret platform. Interface: BMT75. The exact configuration is confirmed by Mongtec engineering at RFQ.
Yes. BMT and VDI are open machine-side standards, so switching supplier does not require any turret modification. Mongtec also publishes cross-reference pages for WTO, Heimatec, EWS, Eppinger, BIG and other brands.
Lead time is quoted per order and ships from Taichung, Taiwan.
A selection of Mongtec BMT75 driven tool holder article numbers. This is a starting point, not a confirmed fit — the exact turret drawing is verified at RFQ. See all 6 BMT75 article numbers →
| Article no. | Orientation | Collet | Max speed | Torque |
|---|---|---|---|---|
| M1037 | Axial | ER32 | 4,000 rpm | 70 Nm |
| M1137 | Axial | ER40 | 4,000 rpm | 100 Nm |
| M3037 | Axial | ER40 | 4,000 rpm | 100 Nm |
Static BMT75 turret tooling for this machine →
All 228 article numbers with full specification · How to choose a driven tool holder · PSC / ISO 26623 tooling
Machine builders regularly ship the same model with different turrets — station count, model suffix and the number of keys all change the mounting. The Hardinge Conquest H51 is BMT55 in the 12-station build and BMT45 in the 16-station build; the Okuma GENOS L300 M is VDI40, while the L300 MW/MYW uses a 65×73 mm bolt pattern. This is the single most common reason a driven tool holder arrives and will not bolt on. BMT bolt pattern reference — 38 patterns by machine builder →
Send your model and a photo of the turret face — we confirm the fit before quoting →
Whether a holder mounts is decided by the turret bolt pattern and the drive coupling, not by the machine name alone. The types below are published by Mongtec for this interface; the exact article number is confirmed against the actual turret drawing at RFQ.
BMT75 article numbers · BMT bolt pattern reference (38 patterns) · All driven tool types and turret interfaces