Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, supplies BMT and VDI (DIN 69880) driven and static tool holders for EMCO (Austria) turning centers — the HyperTurn and MaxxTurn series. Each driven holder is built to ≤0.003 mm runout with a supplied inspection report. Pick your machine below, or contact engineering — the exact interface for a given model is confirmed at RFQ.
| Series | Type | Mongtec supply |
|---|---|---|
| VDI (DIN 69880) | MaxxTurn 45/65/110/200, HyperTurn 45/65 | Driven & static VDI holders |
| BMT / disc turret | HyperTurn 95/110, 645/665, 100 Powermill | Driven & static holders — size at RFQ |
| Vertical | VT-250 / 400 | BMT / VDI — confirmed at RFQ |
Interface data is drawn from publicly available machine-builder specifications and tooling application listings. Where a model's interface is not published, Mongtec confirms the BMT bolt pattern or VDI type and drive at RFQ — "confirmed at RFQ" verifies the interface, it does not mean the model is outside our supply range. Mongtec supplies open-standard BMT and VDI interfaces; it does not supply or claim compatibility with proprietary quick-change systems such as WTO QuickFlex®.
Also covered (send configuration for RFQ): other EMCO HyperTurn, MaxxTurn and Turn-series machines.
Mongtec supplies BMT and VDI driven and static tool holders across the full EMCO turning-center range. Published interface types are noted where available; the exact interface for a given build is confirmed at RFQ.
EMCOMAT / EMCOTURN: EMCOMAT E300; EMCOTURN E25; E45 M/MY & S45; E45 SM/SMY; E65 M/MY & S65 (VDI30); E65 SM/SMY (VDI30); E65 M/MY (VDI40); E65 SM/SMY (VDI40); 332MC; 345-II (DIN5480); 700 MC; 800 MC; 900 MC.
Concept Turn: 155 / 250 / 260; 450 / 460.
Hyperturn: 45 (VDI25); 45 / 50 / 65 (BMT45); 65 (VDI30); 645 / 665 (VDI30); 65 / 645 / 665 (VDI40); 65 (BMT55); 690 (VDI40); 95 / 110; 95 / 110 SMB / SM2Y (BMT65); 100 Powermill (BMT65).
Maxxturn: 25; 45 M; 45 SM / SMY / G2; 65 M/MY/SM/SMY (BMT55); 65 M (VDI30); 65 SM (VDI30); 65 SMY (VDI30); 65 SMY (BMT45); 65 (VDI40); 95 (VDI40); 95 (BMT55); 110 (VDI50); 110 (BMT65); 200 (BMT85); 200 (VDI60).
UNIVERSALTURN / Vertical: UNIVERSALTURN 50 M/MY; 50 SMY; Vertical VT 160; VT 250 / 260 / 400.
EMCO turning centers use VDI (DIN 69880) turrets on MaxxTurn and disc/BMT turrets on larger HyperTurn machines. The exact size and coupling depend on the model and build; send your machine details and Mongtec confirms the interface at RFQ.
Yes. Mongtec designs and engineers driven (live) and static holders for EMCO BMT and VDI interfaces, including axial, radial, adjustable-angle and multi-output configurations, matched to the machine's drive coupling.
Very likely yes. Send the model name and turret type via the contact page and engineering will confirm availability and interface.
It means the exact interface dimensions (BMT size or VDI type, drive coupling) are verified against your specific machine before quotation. It does not mean the model is outside Mongtec's supply range.
Driven holders are built to 0.003 mm runout or better and ship with an individual inspection report. Materials, heat treatment and gear specifications are documented for each order.