Will a Mongtec driven tool holder fit my Goodway turret?

Mongtec supplies on the same open machine-side standards Goodway turrets use — BMT face-and-taper and VDI polygonal shank to DIN 69880. Because BMT is a de facto rather than an ISO/DIN standard, fitment is confirmed per machine: send the model designation and turret station count (a photo of the turret face or the machine spec sheet helps) and Mongtec engineering will confirm before quoting.

My Goodway model is not in the list above — can you still supply?

In most cases yes. The list covers models already documented by Mongtec; it is not the limit of what Mongtec can supply. Custom and special-configuration units are a standard part of the line. Send the model and turret details via the RFQ link and engineering will confirm feasibility and lead time.

What is the lead time?

Mongtec does not publish a blanket lead time. It is quoted per order once interface, quantity and any customisation are reviewed. Request a quote for a project-specific answer.

Do you supply static holders and boring bar holders as well as driven tools?

Yes. Static holders, boring bar holders and custom builds are supplied on the same turret interfaces as the driven units.

Does Mongtec repair driven tools from other brands used on Goodway machines?

Mongtec's Taiwan service centre works on driven tool holders and angle heads. Whether a specific third-party brand and model is covered is confirmed case by case on request.

Are Goodway and Mongtec both Taiwanese?

Yes. Goodway Machine Corp. builds its turning centers in Taiwan, and Mongtec Precision designs and engineers its tooling in Taichung, Taiwan. For Taiwan-based buyers this typically shortens shipping and shortens the loop when a special configuration needs to be discussed with engineering.

Catalogue Products Machines Angle Heads Tool Holders Guides Get a Quote mongtec-tools.com ↗

Goodway CNC Turning Centers — Mongtec Tooling Compatibility

Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, supplies BMT and VDI (DIN 69880) driven tool holders, static holders and quick-change tooling for Goodway CNC lathes and turning centers. Select your machine below, or contact engineering if your model is not listed — interface dimensions are confirmed per machine at RFQ.

Turret interfaces listed for Goodway in Mongtec’s TOOL HOLDER SELECTION GUIDE

Mongtec’s selection guide has no Goodway-specific section: Goodway lathes use the open BMT and VDI turret standards, so the standard Mongtec article numbers apply once the turret size is known. Send the machine model and a photo of the turret face and Mongtec confirms the interface before quoting.

Goodway machines with the Goodway D63 turret mounting are covered by a dedicated Mongtec range: Goodway D63 driven tool holders.

Source: Mongtec TOOL HOLDER SELECTION GUIDE (PDF, 2.8 MB). Machine builders change turret designs between series and build years; the interface is always confirmed against the turret before quoting. Send the machine model and a turret photo →

Mongtec driven tool line — at a glance

Figures below are Mongtec's own published line specifications (mongtec-tools.com, accessed 2026-07-20). They describe the capability range of the product line; the rating of a specific unit for a specific machine is confirmed by Mongtec engineering at RFQ.

Turret interfaces supplied	BMT (face-and-taper) and VDI polygonal shank to DIN 69880
Driven tool speed	6,000–12,000 rpm standard; up to 32,000 rpm with speed increaser
Max torque	Up to 160 Nm (line capability; unit rating confirmed at RFQ)
Coolant	Internal / external, up to 100 bar
Runout	≤0.003 mm published for the Mazak-compatible 0° driven tool line; other families confirmed at RFQ
Bearings / gearing	Imported P4/P5 precision bearings; precision-ground spiral bevel gear pairs
Product types	Driven holders (axial / radial / adjustable-angle), static holders, boring bar holders, custom configurations
Lead time	No blanket published figure — quoted per order after interface, quantity and customisation are reviewed

On turret standards: VDI is codified in DIN 69880. BMT (Base Mounted Turret) is a widely adopted de facto industry interface but is not published by ISO or DIN — two turrets both labelled “BMT65” can differ in detail between machine builders. Mongtec therefore verifies the actual turret dimensions of the stated machine before confirming fitment.

Supported Goodway models (56)

Mongtec static turret toolholders

The Mongtec Static Turret Toolholders, Ver 2026.07 catalogue names this machine platform for turret sizes BMT55, BMT65. Published static (non-driven) holders — OD, double-OD, ID and face types:

Ordering codes are machine-builder specific. The designations below identify the holder type and its dimensions. Because mounting details differ between machine builders even within the same nominal turret size, the same BMT specification can carry a different Mongtec article code depending on the machine it is built for — Mongtec engineering assigns the correct code for your machine at RFQ.

Turret	Holder type	Type designation	C	K	G	H	X	A	B	E	Weight
BMT55	OD	C6020	90	115	60	20	20	15	64	64	3.29 kg
BMT55	OD	C8020	86	120	80	20	20	15	64	64	4.34 kg
BMT55	OD	C8025	95	120	80	25	25	15	64	64	4.30 kg
BMT55	OD	C8032	86	120	80	32	32	15	64	64	4.34 kg
BMT55	Double OD	C8020	92	120	80	20	21	15	64	64	5.60 kg
BMT55	ID	B6032	86	105	90	60	32	15	64	64	5.10 kg
BMT55	ID	B6040	86	105	90	60	40	15	64	64	5.10 kg
BMT55	ID	B7032	86	105	100	70	32	15	64	64	5.96 kg
BMT55	ID	B7040	86	105	100	70	40	15	64	64	4.90 kg
BMT55	ID	B8032	86	105	109	80	32	15	64	64	5.80 kg
BMT55	ID	B8540	86	105	115	85	40	15	64	64	5.80 kg
BMT55	Face	F7020	90	95	70	20	20	15	64	64	3.51 kg
BMT55	Face	F7025	86	95	70	25	25	15	64	64	3.35 kg
BMT55	Face	F8032	86	95	80	32	32	15	64	64	3.82 kg
BMT55	Face	F8520	92	95	85	20	20	15	64	64	4.06 kg
BMT55	Face	F8525	92	95	85	25	25	15	64	64	4.45 kg
BMT65	OD	C7520	96	131	75	20	20	18	73	70	4.97 kg
BMT65	OD	C7525	95	131	75	25	25	18	73	70	4.97 kg
BMT65	OD	C8025	95	131	80	25	25	18	73	70	5.25 kg
BMT65	Double OD	C7520	97	131	75	20	21	18	73	70	6.10 kg
BMT65	ID	B6032	86	105	90	60	32	15	64	64	5.10 kg
BMT65	ID	B6040	86	105	90	60	40	15	64	64	5.10 kg
BMT65	ID	B7032	86	105	100	70	32	15	64	64	5.96 kg
BMT65	ID	B7040	86	105	100	70	40	15	64	64	4.90 kg
BMT65	ID	B8032	86	105	109	80	32	15	64	64	5.80 kg
BMT65	ID	B8540	86	105	115	85	40	15	64	64	5.80 kg
BMT65	Face	F7025	95	106	70	25	25	18	93	70	4.13 kg
BMT65	Face	F9525	96	105	95	25	25	18	73	70	5.62 kg

Dimensions in mm, from the Mongtec Static Turret Toolholders, Ver 2026.07 catalogue. This is the published range for those turret sizes, not a confirmed fit for a specific machine configuration — Mongtec engineering verifies interface dimensions, clearance, shank size and the correct article code per machine at RFQ. Ask engineering to confirm →

What to send for a quote

Mongtec confirms fit and quotes from four details. Email them to info@mongtec.com or use the quote form — we reply within one working day.

Machine make and full model, as shown on the machine nameplate.
Turret interface (for example BMT65 or VDI40) — if unsure, a photo of the turret face is enough.
The part number you use now, or a photo of the nameplate on the holder you are replacing.
Quantity.

Request a quote → · Shipping, Incoterms and payment for buyers outside Taiwan →

FAQ

Will a Mongtec driven tool holder fit my Goodway turret?: Mongtec supplies on the same open machine-side standards Goodway turrets use — BMT face-and-taper and VDI polygonal shank to DIN 69880. Because BMT is a de facto rather than an ISO/DIN standard, fitment is confirmed per machine: send the model designation and turret station count (a photo of the turret face or the machine spec sheet helps) and Mongtec engineering will confirm before quoting.
My Goodway model is not in the list above — can you still supply?: In most cases yes. The list covers models already documented by Mongtec; it is not the limit of what Mongtec can supply. Custom and special-configuration units are a standard part of the line. Send the model and turret details via the RFQ link and engineering will confirm feasibility and lead time.
What is the lead time?: Mongtec does not publish a blanket lead time. It is quoted per order once interface, quantity and any customisation are reviewed. Request a quote for a project-specific answer.
Do you supply static holders and boring bar holders as well as driven tools?: Yes. Static holders, boring bar holders and custom builds are supplied on the same turret interfaces as the driven units.
Does Mongtec repair driven tools from other brands used on Goodway machines?: Mongtec's Taiwan service centre works on driven tool holders and angle heads. Whether a specific third-party brand and model is covered is confirmed case by case on request.
Are Goodway and Mongtec both Taiwanese?: Yes. Goodway Machine Corp. builds its turning centers in Taiwan, and Mongtec Precision designs and engineers its tooling in Taichung, Taiwan. For Taiwan-based buyers this typically shortens shipping and shortens the loop when a special configuration needs to be discussed with engineering.

Additional Goodway models covered

Mongtec supplies BMT and VDI driven and static tool holders across the full Goodway turning-center range; turret size and drive are confirmed at RFQ.

GA / GLA / GLS: GA-2000–3600 M; GA-3000/3300/3600; GLA-1500 M; GLS-150 M (bevel gear drive); GLS-150/200 M/Y (new turret); GLS-1500/2000 M/LY/LMS/LYS; GLS-2800/3000/3300 M/Y/MS/YS.

GS (horizontal turret): GS-200/260/280 M/MS; GS-400/600/6000/6600/8000/8800 M; GS-400 M (old turret); GS-2000–4000 M/Y/MS/YS (12-station); GS-2000–3300 M/Y/MS/YS (16-station); GS-3000/3300/3600 alpha; GS-4000/4300 L; GS-6000.

GMS / GMT / GTH / GTW / TS: GMS-2000 ST (15-station); GMT-2000; GTH-2000/2600 M; GTW-1500; TS-100 M.

GTS / GTX / GTZ (Y-axis): GTS-150 M (bevel gear drive); GTS-150 MMX/XY (new turret); GTS-200/260 MMX/XY (new turret); GTX/GTZ-2000/2600 M/Y (12-station); GTX/GTZ-2000/2600 M/Y (16-station); GTZ-1500Y.

GV vertical / SK / SW / WE: GV-500/780 M; GV-800/1000 M; SK-38; SW-12; SW-20; SW-20II; SW-32/SW-32II; SW-42; WE-1500/2000/L/LY.

Mongtec resources for Goodway users

Request a quote

+886-4-2265-3360 WhatsApp