Mongtec M0195 — VDI16 axial driven tool holder

M0195 is an axial driven (live) tool holder for the VDI16 turret interface, using ER16 collets, rated to 6,000 rpm and 6.3 Nm. Mongtec Precision is a Taiwanese brand, designed and engineered in Taichung, Taiwan.

Request a quote for M0195 →

Specification

Article number	M0195
Turret interface	VDI16 — VDI per DIN 69880 (cylindrical shank)
Configuration	Axial Tool Head, Offset, Right Version
Orientation	Axial
Collet system	ER16
Drive ratio	1:1
Max spindle speed	6,000 rpm
Max torque	6.3 Nm
Brand	Mongtec Precision Inc. — Taiwanese brand, designed and engineered in Taichung, Taiwan

Source: Mongtec VDI & BMT Driven Tools catalogue, Ver 2026.07.

Mongtec driven tool holder with high-pressure coolant connections

Mongtec driven tool holder with drive shank and coupling shown separately

Representative photographs of Mongtec driven tooling in this class — production units, not renderings. Shown as examples of the VDI16 family, not as a photograph of M0195 itself.

What M0195 does on the machine

The driven spindle points along the Z axis, parallel to the lathe spindle. This is the configuration for face drilling, face tapping and end milling on the part face.

Offset body — the spindle centreline is stepped away from the turret station to reach past adjacent tooling.

Gear ratio 1:1 — tool spindle speed equals turret drive speed. The direct relationship makes speeds and feeds straightforward to calculate from the machine's live-tool rating.

Right-hand version. Handedness has to match the turret rotation and the station you intend to use; the opposite hand will index into the wrong quadrant.

Do not order against the label alone. “VDI16” fixes the shank per DIN 69880, but pocket depth, clamping system and drive coupling still vary between machine builders. Send Mongtec your machine model and a photograph of the turret face — engineering checks M0195 against the actual turret drawing before anything is quoted. That check is free and takes one email.

Related VDI16 configurations

M3095 — Axial Tool Head, Square
M4095 — Radial Tool Head, Direct Drive, Right Version
M7095 — Radial Tool Head, Direct Drive, Right Version
M1096 — Axial Tool Head, Square
M2095 — Radial Tool Head, Indirect Drive
M5095 — Radial Tool Head, Indirect Drive
M6095 — Radial Tool Head, Direct Drive, Left Version

Frequently asked

What machines does the Mongtec M0195 fit?

M0195 is built for the VDI16 turret interface. Because VDI shank dimensions follow DIN 69880, but turret pocket depth, clamping system and drive coupling still vary between machine builders. Send Mongtec your machine model and a photo of the turret face and engineering confirms the fit before anything is quoted.

What speed and torque can M0195 run?

M0195 is rated to 6,000 rpm with 6.3 Nm of torque at a 1:1 drive ratio. The usable figure is whichever is lower: this rating or your machine's live-tool drive rating.

What collet does M0195 take?

M0195 takes ER16 collets. Collets and nuts are supplied separately; specify the shank diameters you intend to run and Mongtec quotes the collet set with the holder.

Is a dimensioned drawing available for M0195?

Yes. Mongtec supplies the full dimensioned drawing for M0195 by email once an enquiry is open, so the drawing is matched to your actual machine and turret configuration rather than a generic sheet.

Get M0195 quoted

Send the machine model, the turret station you want to use and the tools you intend to run. Anything you do not know, Mongtec works out from the machine model — an incomplete enquiry is still worth sending. Dimensioned drawings for M0195 are supplied by email once the enquiry is open.

Request M0195 →

All VDI16 article numbers · How to choose a driven tool holder · All turret interfaces