Mongtec M3095 — VDI16 axial driven tool holder

M3095 is an axial driven (live) tool holder for the VDI16 turret interface, using ER11 collets, rated to 6,000 rpm and 6.3 Nm. Mongtec Precision is a Taiwanese brand, designed and engineered in Taichung, Taiwan.

Request a quote for M3095 →

Specification

Article number	M3095
Turret interface	VDI16 — VDI per DIN 69880 (cylindrical shank)
Configuration	Axial Tool Head, Square
Orientation	Axial
Collet system	ER11
Drive ratio	1:1
Max spindle speed	6,000 rpm
Max torque	6.3 Nm
Brand	Mongtec Precision Inc. — Taiwanese brand, designed and engineered in Taichung, Taiwan

Source: Mongtec VDI & BMT Driven Tools catalogue, Ver 2026.07.

Mongtec driven tool holder with surface-treated body and ER collet output

Mongtec driven tool holder showing turret drive shank and output spindle

Representative photographs of Mongtec driven tooling in this class — production units, not renderings. Shown as examples of the VDI16 family, not as a photograph of M3095 itself.

What M3095 does on the machine

The driven spindle points along the Z axis, parallel to the lathe spindle. This is the configuration for face drilling, face tapping and end milling on the part face.

Square body — the most rigid of the axial layouts and the usual first choice where turret clearance allows it.

Gear ratio 1:1 — tool spindle speed equals turret drive speed. The direct relationship makes speeds and feeds straightforward to calculate from the machine's live-tool rating.

Do not order against the label alone. “VDI16” fixes the shank per DIN 69880, but pocket depth, clamping system and drive coupling still vary between machine builders. Send Mongtec your machine model and a photograph of the turret face — engineering checks M3095 against the actual turret drawing before anything is quoted. That check is free and takes one email.

Other VDI16 holders in the same configuration

Article no.	Collet	Ratio	Max speed	Torque
M1096	ER11	1:1	6000 rpm	6.3 Nm

Related VDI16 configurations

M4095 — Radial Tool Head, Direct Drive, Right Version
M7095 — Radial Tool Head, Direct Drive, Right Version
M0195 — Axial Tool Head, Offset, Right Version
M2095 — Radial Tool Head, Indirect Drive
M5095 — Radial Tool Head, Indirect Drive
M6095 — Radial Tool Head, Direct Drive, Left Version

Frequently asked

What machines does the Mongtec M3095 fit?

M3095 is built for the VDI16 turret interface. Because VDI shank dimensions follow DIN 69880, but turret pocket depth, clamping system and drive coupling still vary between machine builders. Send Mongtec your machine model and a photo of the turret face and engineering confirms the fit before anything is quoted.

What speed and torque can M3095 run?

M3095 is rated to 6,000 rpm with 6.3 Nm of torque at a 1:1 drive ratio. The usable figure is whichever is lower: this rating or your machine's live-tool drive rating.

What collet does M3095 take?

M3095 takes ER11 collets. Collets and nuts are supplied separately; specify the shank diameters you intend to run and Mongtec quotes the collet set with the holder.

Is a dimensioned drawing available for M3095?

Yes. Mongtec supplies the full dimensioned drawing for M3095 by email once an enquiry is open, so the drawing is matched to your actual machine and turret configuration rather than a generic sheet.

Get M3095 quoted

Send the machine model, the turret station you want to use and the tools you intend to run. Anything you do not know, Mongtec works out from the machine model — an incomplete enquiry is still worth sending. Dimensioned drawings for M3095 are supplied by email once the enquiry is open.

Request M3095 →

All VDI16 article numbers · How to choose a driven tool holder · All turret interfaces