| Article number | M4136 |
|---|---|
| Turret interface | VDI50 — VDI per DIN 69880 (cylindrical shank) |
| Configuration | Radial Tool Head, Direct Drive, Left Version |
| Orientation | Radial |
| Collet system | ER40 |
| Drive ratio | 1:1 |
| Max spindle speed | 4,000 rpm |
| Max torque | 100 Nm |
| Brand | Mongtec Precision Inc. — Taiwanese brand, designed and engineered in Taichung, Taiwan |
Source: Mongtec VDI & BMT Driven Tools catalogue, Ver 2026.07.
Representative photographs of Mongtec driven tooling in this class — production units, not renderings. Shown as examples of the VDI50 family, not as a photograph of M4136 itself.
The driven spindle points at 90° to the lathe spindle, along the X axis. This is the configuration for cross drilling, cross tapping and slotting on the outside diameter.
Direct drive. The turret drive shaft couples straight into the tool spindle with no intermediate gear train. Fewer moving parts, less backlash and a stiffer path from the turret motor to the cutter — generally the better choice when surface finish and hole position matter.
Gear ratio 1:1 — tool spindle speed equals turret drive speed. The direct relationship makes speeds and feeds straightforward to calculate from the machine's live-tool rating.
Left-hand version. Handedness has to match the turret rotation and the station you intend to use; the opposite hand will index into the wrong quadrant.
Mongtec publishes tooling pages for these machines with a declared VDI50 turret. Confirming your model here does not confirm M4136 as the article number — that still comes from engineering.
M4136 is built for the VDI50 turret interface. Because VDI shank dimensions follow DIN 69880, but turret pocket depth, clamping system and drive coupling still vary between machine builders. Send Mongtec your machine model and a photo of the turret face and engineering confirms the fit before anything is quoted.
M4136 is rated to 4,000 rpm with 100 Nm of torque at a 1:1 drive ratio. The usable figure is whichever is lower: this rating or your machine's live-tool drive rating.
M4136 takes ER40 collets. Collets and nuts are supplied separately; specify the shank diameters you intend to run and Mongtec quotes the collet set with the holder.
Yes. Mongtec supplies the full dimensioned drawing for M4136 by email once an enquiry is open, so the drawing is matched to your actual machine and turret configuration rather than a generic sheet.
Send the machine model, the turret station you want to use and the tools you intend to run. Anything you do not know, Mongtec works out from the machine model — an incomplete enquiry is still worth sending. Dimensioned drawings for M4136 are supplied by email once the enquiry is open.
All VDI50 article numbers · How to choose a driven tool holder · All turret interfaces