CatalogueProductsMachinesAngle HeadsTool HoldersGuidesGet a Quotemongtec-tools.com ↗

Mongtec VDI static tool holders (DIN 69880), VDI16 to VDI80

334 VDI static tool holders in 27 forms (A1, A2, B1, B2, B3, B4, B5, B6, B7, B8, C1, C2, C3, C4, D1, D2, E1, E2, E3, E4, F, Z2, AR, AL, AUR, AUL, EH) — radial and axial holders for square-shank tools, multiple holders, boring bar holders, drill holders, collet holders, Morse taper holders, parting-off holders, blanks, plugs and setting holders. Interface: VDI to DIN 69880 (ISO 10889), shank Ø16 to 80 mm. Mongtec Precision is a Taiwanese brand headquartered in Taichung, Taiwan.

Request a quote →

All sizes · VDI16 · VDI20 · VDI25 · VDI30 · VDI40 · VDI50 · VDI60 · VDI80

How to read a VDI static holder designation

The designation is the form, then the shank size, then the tool size. B1-30×20 is Form B1 (radial, right-hand, short) with a Ø30 mm VDI shank for a 20 mm square turning tool. E2-30×16 is a boring bar holder with a Ø30 mm shank for a Ø16 mm bar. E4-30/ER32 is an ER32 collet holder on a Ø30 mm shank. F-30MK2 takes a Morse taper 2 tool.

Static VDI is a published standard. The VDI shank and its serration are defined in DIN 69880 (now ISO 10889), so a static VDI holder is specified by size and form rather than by machine builder. What still needs checking is space on the turret — overhang, neighbouring stations and the tool-change path — and, for overhead and left-hand forms, which side of the turret the tool must cut from.

Dimensions from the Mongtec VDI static tool holder catalogue (DIN 69880 / VDI 3425). Dimensions in mm. Article codes and prices are given on the quotation.

Forms on this page

Form A1 — Rectangular blank for special designs

8 sizes. Dimensions in mm, weight in kg.

DesignationDLBHWeight (kg)
A1-16×44164478441.3
A1-20×652065100603.11
A1-25×752575100603.8
A1-30×853085130766.8
A1-40×100401001519612
A1-50×1255012516012020
A1-60×1606016016512530
A1-80×2008020022016060

Form A2 — Round blank for special designs

13 sizes. Dimensions in mm, weight in kg.

DesignationD1D2LWeight (kg)
A2-16×601640600.7
A2-20×702050701.2
A2-25×802558801.77
A2-25×20025582004.17
A2-30×10030681003.1
A2-30×24030682407
A2-40×12040831205.63
A2-40×320408332014
A2-50×13550981359.1
A2-50×400509840024.7
A2-60×1506012315015.2
A2-60×4806012348045.7
A2-80×5008015850082

Form B1 — Radial holder, right-hand, short

11 sizes. Dimensions in mm, weight in kg. Dimensions marked * are with base plate.

DesignationDHhBL1L2Weight (kg)
B1-16×12164212 (10*)4224130.42
B1-16×12164212 (10*)4234230.45
B1-20×16205516 (12*)5530160.55
B1-20×16205516 (12*)5540260.75
B1-25×16255516 (12*)5530160.68
B1-25×16255516 (12*)5540260.92
B1-30×20306620 (16*)7040221.29
B1-40×254080.525 (20*)8544222.28
B1-50×32509532 (25*)10055303.9
B1-60×326010532 (25*)12560306.41
B1-80×408013540 (32*)160754013.5

Form B2 — Radial holder, left-hand, short

11 sizes. Dimensions in mm, weight in kg. Dimensions marked * are with base plate.

DesignationDHhBL1L2Weight (kg)
B2-16×12164212 (10*)4224130.42
B2-16×12164212 (10*)4234230.45
B2-20×16205516 (12*)5530160.55
B2-20×16205516 (12*)5540260.75
B2-25×16255516 (12*)5530160.68
B2-25×16255516 (12*)5540260.92
B2-30×20306620 (16*)7040221.29
B2-40×254080.525 (20*)8544222.28
B2-50×32509532 (25*)10055303.9
B2-60×326010532 (25*)12560306.41
B2-80×408013540 (32*)160754013.5

Form B3 — Radial holder, right-hand, overhead, short

11 sizes. Dimensions in mm, weight in kg. Dimensions marked * are with base plate.

DesignationDHhBL1L2Weight (kg)
B3-16×12164212 (10*)4224130.45
B3-16×12164212 (10*)4234230.48
B3-20×16205516 (12*)5530160.59
B3-20×16205516 (12*)5540260.78
B3-25×16255516 (12*)5530160.71
B3-25×16255516 (12*)5540260.95
B3-30×20307320 (16*)7040221.33
B3-40×254090.525 (20*)8544222.34
B3-50×325011032 (25*)10055304.2
B3-60×326012532 (25*)12560307.11
B3-80×408016040 (32*)160754014.00

Form B4 — Radial holder, left-hand, overhead, short

11 sizes. Dimensions in mm, weight in kg. Dimensions marked * are with base plate.

DesignationDHhBL1L2Weight (kg)
B4-16×12164212 (10*)4224130.3
B4-16×12164212 (10*)4234230.44
B4-20×16205516 (12*)5530160.59
B4-20×16205516 (12*)5540260.78
B4-25×16255516 (12*)5530160.71
B4-25×16255516 (12*)5540260.95
B4-30×20307320 (16*)7040221.45
B4-40×254090.525 (20*)8544222.51
B4-50×325011032 (25*)10055304.23
B4-60×326012532 (25*)12560307.14
B4-80×408016040 (32*)160754014

Form B5 — Radial holder, right-hand, long

11 sizes. Dimensions in mm, weight in kg. Dimensions marked * are with base plate.

DesignationDHhBL1L2Weight (kg)
B5-16×12164212 (10*)5824130.4
B5-16×12164212 (10*)5834230.42
B5-20×16205516 (12*)7530160.72
B5-20×16205516 (12*)7540261.04
B5-25×16255516 (12*)7530160.85
B5-25×16255516 (12*)7540261.28
B5-30×20306620 (16*)10040221.73
B5-40×254080.525 (20*)11844222.88
B5-50×32509532 (25*)13055305
B5-60×326010532 (25*)14560307.14
B5-80×408013540 (32*)190754014

Form B6 — Radial holder, left-hand, long

11 sizes. Dimensions in mm, weight in kg. Dimensions marked * are with base plate.

DesignationDHhBL1L2Weight (kg)
B6-16×12164212 (10*)5824130.57
B6-16×12164212 (10*)5834230.61
B6-20×16205516 (12*)7530160.72
B6-20×16205516 (12*)7540261.04
B6-25×16255516 (12*)7530160.85
B6-25×16255516 (12*)7540261.28
B6-30×20306620 (16*)10040221.73
B6-40×254080.525 (20*)11844222.88
B6-50×32509532 (25*)13055305
B6-60×326010532 (25*)14560307.14
B6-80×408013540 (32*)190754014

Form B7 — Radial holder, right-hand, overhead, long

11 sizes. Dimensions in mm, weight in kg. Dimensions marked * are with base plate.

DesignationDHhBL1L2Weight (kg)
B7-16×12164212 (10*)5824130.54
B7-16×12164212 (10*)5834230.6
B7-20×16205516 (12*)7530160.8
B7-20×16205516 (12*)7540261.2
B7-25×16255516 (12*)7530160.94
B7-25×16255516 (12*)7540261.41
B7-30×20307320 (16*)10040221.84
B7-40×254090.525 (20*)11844223.16
B7-50×325011032 (25*)13055305.32
B7-60×326012532 (25*)14560307.5
B7-80×408016040 (32*)190754014.5

Form B8 — Radial holder, left-hand, overhead, long

11 sizes. Dimensions in mm, weight in kg. Dimensions marked * are with base plate.

DesignationDHhBL1L2Weight (kg)
B8-16×12164212 (10*)5824130.51
B8-16×12164212 (10*)5834230.63
B8-20×16205516 (12*)7530160.8
B8-20×16205516 (12*)7540261.2
B8-25×16255516 (12*)7530160.94
B8-25×16255516 (12*)7540261.41
B8-30×20307320 (16*)10040221.84
B8-40×254090.525 (20*)11844223.16
B8-50×325011032 (25*)13055305.32
B8-60×326012532 (25*)14560307.5
B8-80×408016040 (32*)190754014.5

Form C1 — Axial holder, right-hand

9 sizes. Dimensions in mm, weight in kg. Dimensions marked * are with base plate.

DesignationDHhBL1L2L3Weight (kg)
C1-16×12164212 (10*)43445200.73
C1-20×16205516 (12*)52557300.88
C1-20×16205516 (12*)6550——1
C1-25×16255516 (12*)58557200.91
C1-30×20306620 (16*)707010301.79
C1-40×254080.525 (20*)858512.5303.12
C1-50×32509532 (25*)10010016405.37
C1-60×326010532 (25*)12512516409.15
C1-80×408013540 (32*)160160204019

Form C2 — Axial holder, left-hand

9 sizes. Dimensions in mm, weight in kg. Dimensions marked * are with base plate.

DesignationDHhBL1L2L3Weight (kg)
C2-16×12164212 (10*)43445200.7
C2-20×16205516 (12*)—557301
C2-20×16205516 (12*)6550——1.12
C2-25×16255516 (12*)58557200.87
C2-30×20306620 (16*)767010301.97
C2-40×254080.525 (20*)908512.5303.42
C2-50×32509532 (25*)10510016405.73
C2-60×326010532 (25*)12512516409.15
C2-80×408013540 (32*)160160204019

Form C3 — Axial holder, right-hand, overhead

9 sizes. Dimensions in mm, weight in kg. Dimensions marked * are with base plate.

DesignationDHhBL1L2L3Weight (kg)
C3-16×12164212 (10*)43445200.78
C3-20×16205516 (12*)52557301
C3-20×16205516 (12*)6550——1.2
C3-25×16255516 (12*)58557201.04
C3-30×20306620 (16*)707010302.12
C3-40×254080.525 (20*)858512.5303.68
C3-50×32509532 (25*)10010016406.2
C3-60×326010532 (25*)125125164010
C3-80×408013540 (32*)160160204020.5

Form C4 — Axial holder, left-hand, overhead

9 sizes. Dimensions in mm, weight in kg. Dimensions marked * are with base plate.

DesignationDHhBL1L2L3Weight (kg)
C4-16×12164212 (10*)43445200.78
C4-20×16205516 (12*)—557301
C4-20×16205516 (12*)6550——1.2
C4-25×16255516 (12*)58557201.04
C4-30×20306620 (16*)767010302.12
C4-40×254080.525 (20*)908512.5303.68
C4-50×32509532 (25*)10510016406.2
C4-60×326010532 (25*)125125164010
C4-80×408013540 (32*)160160204019

Form D1 — Multiple square-shank holder

6 sizes. Dimensions in mm, weight in kg. Dimensions marked * are with base plate.

DesignationDHhBL1L2Weight (kg)
D1-25×16255516 (12*)6648341.28
D1-30×20306620 (16*)7660421.73
D1-40×254080.525 (20*)9072502.3
D1-50×32509532 (25*)10585605.4
D1-60×326010532 (25*)115110857.2
D1-80×408013540 (32*)15214010514.3

Form D2 — Multiple square-shank holder, overhead

6 sizes. Dimensions in mm, weight in kg. Dimensions marked * are with base plate.

DesignationDHhBL1L2Weight (kg)
D2-25×16255516 (12*)6648341.28
D2-30×20307320 (16*)7660421.73
D2-40×254090.525 (20*)9072502.3
D2-50×325011032 (25*)10585605.4
D2-60×326012532 (25*)115110857.2
D2-80×408016040 (32*)15214010514.3

Form E1 — Holder for indexable-insert drills, internal coolant

27 sizes. Dimensions in mm, weight in kg.

DesignationD1D2D3D4L1L2Weight (kg)
E1-20×202020405067540.74
E1-20×252025455071590.82
E1-25×202520405867540.91
E1-25×252525455871591.08
E1-30×163016406864491.21
E1-30×203020406867541.17
E1-30×253025456871591.26
E1-30×323032526875631.35
E1-30×403040656885751.72
E1-40×204020408367541.75
E1-40×254025458375591.88
E1-40×324032528375631.95
E1-40×404040608390732.15
E1-50×205020409867542.9
E1-50×255025459880593
E1-50×325032529880633.03
E1-50×405040609890733.21
E1-50×5050507098100833.35
E1-60×2060204012380544.7
E1-60×2560254512380594.76
E1-60×3260325212380634.82
E1-60×4060406012390735.07
E1-60×50605070123100835.12
E1-80×2080204015880547.9
E1-80×2580254515880598.66
E1-80×3280325215880638.7
E1-80×40804060158907310.28

Form E2 — Boring bar holder (cylindrical shank)

54 sizes. Dimensions in mm, weight in kg.

DesignationD1D2D3D4L1L2Weight (kg)
E2-16×6166324044340.4
E2-16×8168324044340.41
E2-16×101610324044340.42
E2-16×121612404044340.43
E2-16×161616404044340.47
E2-20×8208405050410.58
E2-20×102010405050410.63
E2-20×122012405050410.62
E2-20×162016405050410.59
E2-20×202020505050410.73
E2-20×252025505060510.78
E2-25×8258405850410.92
E2-25×102510405850410.97
E2-25×122512405850410.96
E2-25×162516405850410.93
E2-25×202520585850411.07
E2-25×252525585860511.12
E2-30×8308556860511.46
E2-30×103010556860—1.44
E2-30×123012556860—1.45
E2-30×163016556860—1.39
E2-30×203020556860—1.36
E2-30×253025556860—1.33
E2-30×323032686875611.88
E2-40×8408558375—2.32
E2-40×104010558375—2.31
E2-40×124012558375—2.3
E2-40×164016558375612.26
E2-40×204020558375612.13
E2-40×254025558375612
E2-40×324032558375612.95
E2-40×404040838390763.15
E2-50×8508689890764.05
E2-50×105010689890764.02
E2-50×125012689890764
E2-50×165016689890763.94
E2-50×205020689890763.87
E2-50×255025689890763.79
E2-50×325032689890763.58
E2-50×405040989890764.79
E2-50×5050509898100865
E2-60×1060106812390765.7
E2-60×1260126812390765.68
E2-60×1660166812390765.63
E2-60×2060206812390765.56
E2-60×2560256812390765.46
E2-60×3260326812390765.27
E2-60×4060409812390767.31
E2-60×50605098123100866.67
E2-80×208020681581008610.1
E2-80×25802568158100869.95
E2-80×32803268158100869.75
E2-80×408040981581008611.65
E2-80×508050981581008611.1

Form E3 — Collet holder for DIN 6388 collets

12 sizes. Dimensions in mm, weight in kg. D2 is the clamping range for Form A and Form B collets.

DesignationD1D2 Form AD2 Form BD3L1L2Weight (kg)
E3-16×16162–165–164345.5360.43
E3-20×16202–165–164357420.51
E3-20×20202–206–205062460.68
E3-25×16252–165–164357420.98
E3-25×20252–206–205062461.18
E3-30×25302–256–256075591.32
E3-40×25402–256–256075591.82
E3-40×32404–3210–327290732.24
E3-50×22502–256–256075592.87
E3-50×32504–3210–327290733.35
E3-60×32604–3210–327290735
E3-80×40806–4030–4085100829.3

Form E4 — ER collet holder

14 sizes. Dimensions in mm, weight in kg.

DesignationD1D2 (clamping range)D3L1L2ColletWeight (kg)
E4-16/ER16160.5–10323232.5ER160.26
E4-16/ER20161.0–133532—ER200.31
E4-20/ER16200.5–10324032.5ER160.36
E4-20/ER25201.0–16424038ER250.48
E4-20/ER32202.0–20504049.5ER320.58
E4-25/ER25251.0–16425545ER250.67
E4-25/ER32252.0–20505546.5ER320.79
E4-30/ER25301.0–16425557ER251.07
E4-30/ER32302.0–20505562ER321.22
E4-40/ER25401.0–16426357ER251.65
E4-40/ER32402.0–20506362ER321.79
E4-40/ER40403.0–26636375ER401.78
E4-50/ER40503.0–26637875ER402.9
E4-60/ER40603.0–26639475ER404.56

Form F — Morse taper holder

18 sizes. Dimensions in mm, weight in kg.

DesignationD1D2D3MTD4L1L2Weight (kg)
F-20MK1205012.0651-23-0.43
F-20MK2205017.782-23-0.43
F-25MK1255812.0651-23-0.69
F-25MK2255817.782-27-0.88
F-30MK1306812.0651-27-0.94
F-30MK2306817.782-27-0.87
F-30MK3306823.8253-50-1.34
F-40MK2408317.7825536221.51
F-40MK3408323.82535836221.47
F-40MK4408331.26746880222.4
F-50MK2509817.7825536302.61
F-50MK3509823.82535836302.45
F-50MK4509831.26746850302.6
F-50MK5509844.39957572252.5
F-60MK36012323.82535836304.21
F-60MK46012331.26746850304.26
F-60MK56012344.39959863304.75
F-80MK48015831.267468504010

Form Z2 — Blanking plug (steel or plastic)

16 sizes. Dimensions in mm, weight in kg.

DesignationD1D2L1L2MaterialWeight (kg)
Z2-1616403213steel0.26
Z2-2020504016steel0.32
Z2-2525584816steel0.54
Z2-3030685516steel0.69
Z2-4040836320steel1.2
Z2-5050987820steel2.19
Z2-60601239420steel3.62
Z2-808015812420steel7.8
Z2-1616403213plastic—
Z2-2020504016plastic—
Z2-2525584816plastic—
Z2-3030685516plastic—
Z2-4040836320plastic—
Z2-5050987820plastic—
Z2-60601239420plastic—
Z2-808015812420plastic—

Form AR — Parting-off holder, right-hand

7 sizes. Dimensions in mm, weight in kg.

DesignationDHhBL1L2Weight (kg)
AR-25×262564266050441.07
AR-30×263071267050441.52
AR-40×264084.5268550442.68
AR-40×324084.5328550442.57
AR-50×2650882610050444.59
AR-50×3250883210050444.46
AR-60×32601033212550447.54

Form AL — Parting-off holder, left-hand

7 sizes. Dimensions in mm, weight in kg.

DesignationDHhBL1L2Weight (kg)
AL-25×262564266050441.07
AL-30×263071267050441.52
AL-40×264084.5268550442.68
AL-40×324084.5328550442.57
AL-50×2650882610050444.59
AL-50×3250883210050444.46
AL-60×32601033212550447.54

Form AUR — Parting-off holder, right-hand, overhead

7 sizes. Dimensions in mm, weight in kg. The source catalogue prints the overhead versions with the same AR-/AL- designations as the standard parting-off holders; dimension H differs, so state “overhead” when you order.

DesignationDHhBL1L2Weight (kg)
AR-25×262564266050441.07
AR-30×263070267050441.52
AR-40×264075268550442.68
AR-40×324075328550442.57
AR-50×2650802610050444.59
AR-50×3250803210050444.46
AR-60×32601033212550447.54

Form AUL — Parting-off holder, left-hand, overhead

7 sizes. Dimensions in mm, weight in kg. The source catalogue prints the overhead versions with the same AR-/AL- designations as the standard parting-off holders; dimension H differs, so state “overhead” when you order.

DesignationDHhBL1L2Weight (kg)
AL-25×262564266050441.07
AL-30×263070267050441.52
AL-40×264075268550442.68
AL-40×324075328550442.57
AL-50×2650802610050444.59
AL-50×3250803210050444.46
AL-60×32601033212550447.54

Form EH — Setting holder

8 sizes. Dimensions in mm, weight in kg.

DesignationD1D2D3L1L2Weight (kg)
EH16×10016304010015—
EH20×100204050100151.1
EH25×100254058100151.35
EH30×100304068100151.7
EH40×100404083100152.1
EH50×100504098100152.8
EH60×1006040123100153.6
EH80×1008040158100158

Driven tooling for VDI turrets

Driven (live) VDI tool holders: VDI16 · VDI20 · VDI25 · VDI30 · VDI40 · VDI50 · VDI60. Not sure whether your turret is VDI or BMT? BMT or VDI: how to tell · VDI sizes and dimensions.

What to send for a quote

Mongtec confirms fit and quotes from four details. Email them to info@mongtec.com or use the quote form — we reply within one working day.

Request a quote → · Shipping, Incoterms and payment for buyers outside Taiwan →

Frequently asked

What is the difference between a static and a driven VDI tool holder?

A static holder clamps a turning tool, boring bar, drill or collet rigidly in the turret — nothing rotates inside the holder. A driven (live) holder takes rotary drive from the turret so a drill or end mill turns while the spindle is stopped. Most VDI turrets carry both.

Will a VDI static holder fit my turret?

If the turret takes VDI shanks to DIN 69880, the shank fits — the standard fixes the shank diameter and serration. Check the overhang and the neighbouring stations, and pick the right- or left-hand and overhead form for the side the tool cuts from. Send the machine model if you want Mongtec to check the layout before quoting.

Can Mongtec make a VDI holder to my drawing?

Yes. Forms A1 and A2 are soft blanks intended for special designs, and Mongtec quotes special holders from a customer drawing.

Which details does Mongtec need for a quote?

The designation (for example B1-30×20), or the form, shank size and tool size, plus the quantity. For special holders, a drawing.

Request VDI static holders →

All static turret tooling · Driven tool holders · 228 driven article numbers · Machine index

+886-4-2265-3360WhatsApp