Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, supplies BMT and VDI (DIN 69880) driven tool
holders, static holders and quick-change tooling for LEADWELL CNC lathes and turning centers. Select your machine below,
or contact engineering if your model is not listed
— interface dimensions are confirmed per machine at RFQ.
The models documented here are not yet published with a turret interface, so Mongtec confirms it per machine rather than stating it up front. Send the model designation and turret station count — a photo of the turret face or the machine spec sheet is enough — and engineering identifies the interface before quoting. A round bore with a side clamping screw is VDI to DIN 69880; a flat face with four bolts around a locating key is BMT.
Will a Mongtec driven tool holder fit my LEADWELL turret?
Mongtec supplies on the same open machine-side standards LEADWELL turrets use — BMT face-and-taper, VDI polygonal shank to DIN 69880, and PSC polygon coupling to ISO 26623. Because BMT is an industry de-facto standard rather than an ISO or DIN standard, fitment is confirmed per machine: send the model designation and turret station count (a photo of the turret face or the machine spec sheet helps) and Mongtec engineering confirms it against the actual turret drawing before quoting.
My LEADWELL model is not in the list above — can you still supply?
In most cases yes. The list covers models already documented by Mongtec; it is not the limit of what Mongtec can supply. Custom and special-configuration units are a standard part of the work, and Mongtec supplies turret interfaces beyond the article numbers published on this site. Send the model designation and turret station count and engineering will confirm.
Do you supply static holders and boring bar holders as well as driven tools?
Yes. Static turning, boring bar, facing, cut-off and blank holders are supplied on the same turret interfaces as the driven units, alongside quick-change tooling and angle heads.
What quality documentation ships with the tooling?
Every driven unit ships with an individual inspection report for that specific unit — measured values, not a generic batch certificate.
What is the lead time?
Mongtec does not publish a blanket lead time. It is confirmed according to the items and quantities the customer requests, once interface, quantity and any customisation are reviewed. Request a quote for a project-specific answer.
Does Mongtec repair driven tools from other brands used on LEADWELL machines?
Mongtec's Taiwan service centre works on driven tool holders and angle heads. Whether a specific third-party brand and model is covered is confirmed case by case on request.
Turret interfaces for the 1 LEADWELL model on this page are confirmed at RFQ. Published machine-builder specifications do not state the interface consistently enough for us to print it here, and printing a guess would be worse than printing nothing — a holder ordered against a wrong interface does not mount.
What we need to quote a LEADWELL machine
Three things get you a firm quote: the machine model and year, a photograph of the turret face, and the tools you intend to run (drill and tap sizes, or end mill diameter). Anything you do not know we work out from the machine model — an incomplete enquiry is still worth sending, and the interface check costs you nothing.
Why we will not sell against a label. BMT is an industry de-facto standard, not an ISO or DIN published one, so bolt circle, key position and drive coupling can differ between machine builders at the same nominal size. VDI shanks follow DIN 69880, but pocket depth, clamping system and drive coupling still vary. We check the article number against the actual turret drawing before quoting, which is why a holder from us arrives and mounts.