Catalogue Products Machines Angle Heads Tool Holders Guides Get a Quote mongtec-tools.com ↗

Mongtec SK shrink fit chucks — through coolant

Q: What run-out do Mongtec SK shrink fit chucks hold?

Run-out is ≤ 0.003 mm at 3×D and the chucks are balanced to G2.5 at 25,000 rpm, which is what makes shrink fit the first choice for high-speed and deep-cavity work.

Q: Do I need a special machine to fit these?

Yes — a shrink fit induction unit heats the bore to release and clamp the tool. Mongtec supplies the machines as well as the holders; ask for the shrink fit machine range with your enquiry.

58 article numbers on the SK / DIN 69871 (ISO 7/24) shank, bore Ø3–32 mm, 4.5° clamping taper, with through-coolant supply. Run-out ≤ 0.003 mm, balanced G2.5 / 25,000 rpm, coolant form AD. Mongtec Precision is a Taiwanese brand headquartered in Taichung, Taiwan.

Request a quotation →

Mongtec SK shrink fit chucks — through coolant — dimensioned drawing — Dimensioned drawing from the Mongtec catalogue. The dimension letters are the columns of the table below.

Why shrink fit

A shrink fit chuck holds the tool by thermal interference alone: the bore is heated, the shank drops in, and the bore contracts onto it. There is no collet, no nut and no clamping mechanism between the tool and the holder, so the assembly is a single slender body — the highest holding force per unit of diameter, the slimmest profile for deep cavities, and no rotating parts to unbalance at speed.

That is why shrink fit dominates high-speed machining: run-out at ≤ 0.003 mm and balance to G2.5 at 25,000 rpm are achievable because there is nothing in the joint to move.

Specification

Shank	SK / DIN 69871 (ISO 7/24)
Clamping taper	4.5°
Bore range	Ø3 – Ø32 mm
Run-out (A)	≤ 0.003 mm
Balance	G2.5 / 25,000 rpm
Coolant	Through coolant (form AD) — centre and flange outlet
Article numbers	58
Brand	Mongtec Precision Inc.

Article numbers — dimensions in mm

d = tool bore · D = nose diameter · D1 = body diameter · L = gauge length · L2 = projection · L1, N, G = clamping-screw and balancing-ring data.

SK40 — 29 article numbers

Article no.	Bore Ø d	D	D1	L	L2	L1	N	G
SK40QSF03Q80K	Ø3	15	20	80	60.9	-	-	-
SK40QSF04Q80K	Ø4	15	20	80	60.9	-	-	-
SK40QSF05Q80K	Ø5	15	20	80	60.9	-	-	-
SK40QSF06Q80K	Ø6	21	27	80	60.9	36	10	M5
SK40QSF08Q80K	Ø8	21	27	80	60.9	36	10	M6
SK40QSF10Q80K	Ø10	24	32	80	60.9	42	10	M8x1
SK40QSF12Q80K	Ø12	24	32	80	60.9	47	10	M10x1
SK40QSF14Q80K	Ø14	27	34	80	60.9	47	10	M10x1
SK40QSF16Q80K	Ø16	27	34	80	60.9	50	10	M12x1
SK40QSF18Q80K	Ø18	33	42	80	60.9	50	10	M12x1
SK40QSF20Q80K	Ø20	33	42	80	60.9	52	10	M16x1
SK40QSF25Q100K	Ø25	44	50	100	80.9	58	10	M16x1
SK40QSF32Q100K	Ø32	44	50	100	80.9	62	10	M16x1
SK40QSF06Q120K	Ø6	21	27	120	100.9	36	10	M5
SK40QSF08Q120K	Ø8	21	27	120	100.9	36	10	M6
SK40QSF10Q120K	Ø10	24	32	120	100.9	42	10	M8x1
SK40QSF12Q120K	Ø12	24	32	120	100.9	47	10	M10x1
SK40QSF14Q120K	Ø14	27	34	120	100.9	47	10	M10x1
SK40QSF16Q120K	Ø16	27	34	120	100.9	50	10	M12x1
SK40QSF18Q120K	Ø18	33	42	120	100.9	50	10	M12x1
SK40QSF20Q120K	Ø20	33	42	120	100.9	52	10	M16x1
SK40QSF06Q160K	Ø6	21	32	160	140.9	36	10	M5
SK40QSF08Q160K	Ø8	21	32	160	140.9	36	10	M6
SK40QSF10Q160K	Ø10	24	34	160	140.9	42	10	M8x1
SK40QSF12Q160K	Ø12	24	34	160	140.9	47	10	M10x1
SK40QSF14Q160K	Ø14	27	42	160	140.9	47	10	M10x1
SK40QSF16Q160K	Ø16	27	42	160	140.9	50	10	M12x1
SK40QSF18Q160K	Ø18	33	50	160	140.9	50	10	M12x1
SK40QSF20Q160K	Ø20	33	50	160	140.9	52	10	M16x1

SK50 — 29 article numbers

Article no.	Bore Ø d	D	D1	L	L2	L1	N	G
SK50QSF06Q80K	Ø6	21	27	80	60.9	36	10	M5
SK50QSF08Q80K	Ø8	21	27	80	60.9	36	10	M6
SK50QSF10Q80K	Ø10	24	32	80	60.9	42	10	M8x1
SK50QSF12Q80K	Ø12	24	32	80	60.9	47	10	M10x1
SK50QSF14Q80K	Ø14	27	34	80	60.9	47	10	M10x1
SK50QSF16Q80K	Ø16	27	34	80	60.9	50	10	M12x1
SK50QSF18Q80K	Ø18	33	42	80	60.9	50	10	M12x1
SK50QSF20Q80K	Ø20	33	42	80	60.9	52	10	M16x1
SK50QSF32Q90K	Ø32	44	53	90	70.9	62	10	M16x1
SK50QSF06Q120K	Ø6	21	27	120	100.9	36	10	M5
SK50QSF08Q120K	Ø8	21	27	120	100.9	36	10	M6
SK50QSF10Q120K	Ø10	24	32	120	100.9	42	10	M8x1
SK50QSF12Q120K	Ø12	24	32	120	100.9	47	10	M10x1
SK50QSF14Q120K	Ø14	27	34	120	100.9	47	10	M10x1
SK50QSF16Q120K	Ø16	27	34	120	100.9	50	10	M12x1
SK50QSF18Q120K	Ø18	33	42	120	100.9	50	10	M12x1
SK50QSF20Q120K	Ø20	33	42	120	100.9	52	10	M16x1
SK50QSF25Q120K	Ø25	44	53	120	100.9	58	10	M16x1
SK50QSF32Q120K	Ø32	44	53	120	100.9	62	10	M16x1
SK50QSF06Q160K	Ø6	21	32	160	140.9	36	10	M5
SK50QSF08Q160K	Ø8	21	32	160	140.9	36	10	M6
SK50QSF10Q160K	Ø10	24	34	160	140.9	42	10	M8x1
SK50QSF12Q160K	Ø12	24	34	160	140.9	47	10	M10x1
SK50QSF14Q160K	Ø14	27	42	160	140.9	47	10	M10x1
SK50QSF16Q160K	Ø16	27	42	160	140.9	50	10	M12x1
SK50QSF18Q160K	Ø18	33	51	160	140.9	50	10	M12x1
SK50QSF20Q160K	Ø20	33	51	160	140.9	52	10	M16x1
SK50QSF25Q160K	Ø25	44	60	160	140.9	58	10	M16x1
SK50QSF32Q160K	Ø32	44	60	160	140.9	62	10	M16x1

Which article number fits your machine?

The drawing above is the published catalogue drawing, and the dimension letters are the columns of the table below. What Mongtec confirms for you is the interface on your machine, the reach for the operation, and the final article number. Send the machine and the operation; the check is free.

Send my machine and get the article number →

Source: Mongtec Shrink Fit Chuck catalogue, Ver 2026.

A shrink fit holder needs a shrink fit unit. Tools are changed by induction heating, not by hand. If you do not already run one, ask for the Mongtec shrink fit machine range with your enquiry — holder and unit are quoted together.

Frequently asked

What run-out do Mongtec SK shrink fit chucks hold?

Run-out is ≤ 0.003 mm and the chucks are balanced to G2.5 at 25,000 rpm. There is no collet or nut in the joint, so there is nothing to shift under load or at speed.

Which bore sizes are available in SK?

Bore diameters from Ø3 to Ø32 mm across 58 published article numbers, in several gauge lengths per bore — pick the shortest holder that still reaches the feature.

Do I need a special machine to fit these?

Yes. A shrink fit induction unit heats the bore to release and clamp the tool. Mongtec supplies the machines as well as the holders.

Get a quotation

Send the spindle interface, the tool shank diameters you run and the reach you need. Dimensioned drawings are supplied by email once the enquiry is open.

Request SK shrink fit chucks →

All shrink fit chucks · All tool holders · All Mongtec article numbers

+886-4-2265-3360 WhatsApp