Broaching units cut internal keyways, hexagons and squares on the lathe, removing the second operation on a broaching press or a slotting machine. Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, builds them to mount on DN Solutions turrets, published for BMT45, BMT55, BMT65.
Designed for Integrated Gear and Keyway Machining
Gear and keyway machining often require additional specialized equipment or secondary setups, which increase processing time and the risk of positioning errors. We provide a comprehensive integrated broaching solution, enabling customers to complete internal gears, external gears, and keyway machining directly on their Doosan multitasking turning-milling centers, significantly boosting production line integration efficiency.
Featuring a precision reciprocating drive design to ensure dimensional consistency and stable forming quality. Suitable for:
65 DN Solutions models. Where the turret interface is published it is shown; where it is blank the interface depends on the turret actually fitted and is confirmed at enquiry.
| Machine model | Turret interface (where published) | Turret |
|---|---|---|
| DST 20/26, DST 20/26Y | — | — |
| Lynx 2100 | — | — |
| Lynx 2100 M/MS/LY/LSY | — | — |
| Lynx 300M, 2600M/Y, Puma GT2100,2600M | — | — |
| Lynx 2600 SY (12ST) | — | 12-station |
| Lynx 2600 Y/SY (16ST) | — | 16-station |
| Puma GT2100,2600(10ST), GT2600(12ST) | — | 10-station |
| Puma GT2100 (12ST) | — | 12-station |
| Puma GT3100 M | — | — |
| Puma 2100, 2600 | — | — |
| Puma 2100,2600(II) M/MS/Y/SY (BMT55) | BMT55 | — |
| Puma 2100,2600(II) M/MS/Y/SY (BMT65) | BMT65 | — |
| Puma 2100, 2600 Y/SY (16ST, BMT55) | BMT55 | 16-station |
| Puma 3100 M/Y/SY | — | — |
| Puma 4100, 5100 M/LM/LY | — | — |
| Puma 600, 700, 800 M/LM/LY | — | — |
| Puma DNT 2100 | — | — |
| Puma DNT 2600 | — | — |
| Puma DNT 2100, 2600 (BMT55) | BMT55 | — |
| Puma DNT 2100, 2600 (BMT65) | BMT65 | — |
| Puma MX1600 ST (BMT45) | BMT45 | — |
| Puma MX1600, 2100 ST (BMT55) | BMT55 | — |
| Puma MX2600 T/ST | — | — |
| Puma SMX2100 ST | — | — |
| Puma SMX2600, 3100 ST | — | — |
| Puma ST20GS II, ST26GS II | — | — |
| Puma ST32GS II, ST35GS II, ST38GS II | — | — |
| Puma TL2000, 2500 M | — | — |
| Puma TT1300 SY/SYY | — | — |
| Puma TT1800, 2100 MS/SY/SYY | — | — |
| Puma TT2500 MS/SY | — | — |
| Puma TW2100 M | — | — |
| Puma TW2600 M | — | — |
| Puma V400 | — | — |
| Puma V400 M | — | — |
| Puma V8300 M | — | — |
| Puma V8300 M (ATC) | — | — |
| Puma VT900 M, V9300 M | — | — |
| Puma VT1100 M | — | — |
| Lynx 220 A/B/C | — | — |
| Lynx 220 LSA/LSC | — | — |
| Lynx 220 M/LM | — | — |
| Lynx 220 LMS/LY/LSY | — | — |
| Lynx 2100 (10/12ST) | — | 12-station |
| Puma 230, 240, 280 M/MS/LM | — | — |
| Puma 240 A/B/C/LC | — | — |
| Puma 280, 2100, 2600 | — | — |
| Puma 300 M/MS | — | — |
| Puma 1500,2000,2500 M/MS/Y/SY | — | — |
| Puma 400, 480 M/LM | — | — |
| Puma Inverturn 3000 M | — | — |
| Puma MX2000, 2500, 2600 T/ST/SY | — | — |
| Puma S400 M | — | — |
| Puma ST10 G/GS | — | — |
| Puma ST20 G/GS | — | — |
| Puma ST26 G/GS | — | — |
| Puma ST32 G/GS | — | — |
| Puma ST35 G/GS | — | — |
| Puma TT1500, 1800, 2100 MS/SY/SYY | — | — |
| Puma TT2000, 2500 MS/SY | — | — |
| Puma V550, 8300 M | — | — |
| Puma V550, 8300 M (ATC) | — | — |
| Puma VT450 M, VT450 M-2SP | — | — |
| Puma VT750 M, M-2SP | — | — |
| Puma VT900 M, M-2SP, V9300 M | — | — |
All machine builders for broaching units →
The machine model alone does not decide the holder. The same model can leave the factory with different turrets — station count, model suffix and key arrangement all change the mounting. Tell us the machine, the turret and the operation and we confirm the mounting before quoting.
Already using another brand? Send the drawing or the article number of the holder you run today and Mongtec will convert it to an equivalent Mongtec holder — same mounting, same reach, same output.