ID static holders carry boring bars and internal turning tools, sized to the turret's bore and clamped on the same mounting as the rest of the station. Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, builds them to mount on DN Solutions turrets, published for BMT45, BMT55, BMT65.
Developed specifically for DN Solutions high-performance multitasking centers, providing robust support for internal turning, drilling, and boring operations. Optimized for the high-rigidity interface of DN Solutions turrets (such as Lynx and Puma series), these toolholders feature a precision-guided structure designed to ensure exceptional axial accuracy and vibration damping once the tool is clamped—helping customers achieve ultra-fine internal machining quality on their machines.
39 DN Solutions models. Where the turret interface is published it is shown; where it is blank the interface depends on the turret actually fitted and is confirmed at enquiry.
| Machine model | Turret interface (where published) | Turret |
|---|---|---|
| DST 20/26, DST 20/26Y | — | — |
| Lynx 2100 | — | — |
| Lynx 2100 M/MS/LY/LSY | — | — |
| Lynx 300M, 2600M/Y, Puma GT2100,2600M | — | — |
| Lynx 2600 SY (12ST) | — | 12-station |
| Lynx 2600 Y/SY (16ST) | — | 16-station |
| Puma GT2100,2600(10ST), GT2600(12ST) | — | 10-station |
| Puma GT2100 (12ST) | — | 12-station |
| Puma GT3100 M | — | — |
| Puma 2100, 2600 | — | — |
| Puma 2100,2600(II) M/MS/Y/SY (BMT55) | BMT55 | — |
| Puma 2100,2600(II) M/MS/Y/SY (BMT65) | BMT65 | — |
| Puma 2100, 2600 Y/SY (16ST, BMT55) | BMT55 | 16-station |
| Puma 3100 M/Y/SY | — | — |
| Puma 4100, 5100 M/LM/LY | — | — |
| Puma 600, 700, 800 M/LM/LY | — | — |
| Puma DNT 2100 | — | — |
| Puma DNT 2600 | — | — |
| Puma DNT 2100, 2600 (BMT55) | BMT55 | — |
| Puma DNT 2100, 2600 (BMT65) | BMT65 | — |
| Puma MX1600 ST (BMT45) | BMT45 | — |
| Puma MX1600, 2100 ST (BMT55) | BMT55 | — |
| Puma MX2600 T/ST | — | — |
| Puma SMX2100 ST | — | — |
| Puma SMX2600, 3100 ST | — | — |
| Puma ST20GS II, ST26GS II | — | — |
| Puma ST32GS II, ST35GS II, ST38GS II | — | — |
| Puma TL2000, 2500 M | — | — |
| Puma TT1300 SY/SYY | — | — |
| Puma TT1800, 2100 MS/SY/SYY | — | — |
| Puma TT2500 MS/SY | — | — |
| Puma TW2100 M | — | — |
| Puma TW2600 M | — | — |
| Puma V400 | — | — |
| Puma V400 M | — | — |
| Puma V8300 M | — | — |
| Puma V8300 M (ATC) | — | — |
| Puma VT900 M, V9300 M | — | — |
| Puma VT1100 M | — | — |
All machine builders for id static toolholders →
The machine model alone does not decide the holder. The same model can leave the factory with different turrets — station count, model suffix and key arrangement all change the mounting. Tell us the machine, the turret and the operation and we confirm the mounting before quoting.
Already using another brand? Send the drawing or the article number of the holder you run today and Mongtec will convert it to an equivalent Mongtec holder — same mounting, same reach, same output.