ID static holders carry boring bars and internal turning tools, sized to the turret's bore and clamped on the same mounting as the rest of the station. Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, supplies them to mount on Takisawa Taiwan turrets, published for BMT45, BMT55, BMT65, BMT75.
Developed specifically for Takisawa Taiwan high-performance lathes and multitasking centers, providing robust support for internal turning, drilling, and boring operations. Optimized for the high-rigidity interface of Takisawa turrets, these toolholders feature a precision clamping structure designed to ensure exceptional axial accuracy and vibration damping once the tool is secured—helping customers achieve micron-level internal machining quality on their Takisawa Taiwan machines.
31 Takisawa Taiwan models. Where the turret interface is published it is shown; where it is blank the interface depends on the turret actually fitted and is confirmed at enquiry.
| Machine model | Turret interface (where published) | Turret |
|---|---|---|
| EX-3.../ 5.../ 7.../ 9... | — | — |
| EX/NEX-508, 510, 908, 910 | — | — |
| EX-1500, 2000 YT/YS | — | — |
| FX-600 | — | — |
| FX-800 | — | — |
| FX-1500 (BMT45) | BMT45 | — |
| LA-150, 200 M | — | — |
| LA-250, 300 M/Y | — | — |
| LA-250 YS T12 | — | — |
| LA-250 YS/YT T15 | — | — |
| LA-250 YS II T15 (BMT65) | BMT65 | — |
| LA-350, 450 M/Y | — | — |
| LA-350,450 M/Y (BMT75) | BMT75 | — |
| LS-800 M/Y | — | — |
| LS-1000M | — | — |
| LX-2500, 3000M/Y | — | — |
| LX-2500, 3000M/Y (BMT65) | BMT65 | — |
| MX-800 | — | — |
| NEX-108, 110 M/Y | — | — |
| NEX-110Y (BMT65) | BMT65 | — |
| NEX-315, 715 | — | — |
| NT-2500 M | — | — |
| NX-2000 M/MS/Y/YS T12 | — | — |
| NX-2500 T12 | — | — |
| NX-2500 T12 (BMT65) | BMT65 | — |
| NX-2500 T15 | — | — |
| NX-2500 T15 (BMT65) | BMT65 | — |
| UX-2000 (BMT55) | BMT55 | — |
| VTL-450 M | — | — |
| VTL-750, 760 M | — | — |
| VTL-950, 1100 M | — | — |
All machine builders for id static toolholders →
The machine model alone does not decide the holder. The same model can leave the factory with different turrets — station count, model suffix and key arrangement all change the mounting. Tell us the machine, the turret and the operation and we confirm the mounting before quoting.
Already using another brand? Send the drawing or the article number of the holder you run today and Mongtec will convert it to an equivalent Mongtec holder — same mounting, same reach, same output.
Mongtec publishes static ID boring bar holders for 28 Takisawa Taiwan machine models, on turret interfaces BMT45, BMT55, BMT65, BMT75. On these machines the holder is used for holding boring bars for internal turning, boring and internal grooving. Article numbers are matched to the machine at RFQ — we confirm the turret interface from the builder’s drawing rather than assume it from the model name.
Takisawa Taiwan machine not on this list? Send the model and we confirm the interface →