Axial (0°) driven tool holders drive the cutter parallel to the spindle axis, for face drilling, face milling and tapping into the end of the part while it is still in the chuck. Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, builds them to mount on Takisawa Taiwan turrets, published for BMT45, BMT55, BMT65, BMT75.
Developed specifically for Takisawa Taiwan multitasking centers. Optimized for the high-precision power transmission requirements of Takisawa turrets, these tools are designed to provide exceptionally stable axial cutting performance. Whether performing precision drilling, tapping, or milling, they ensure long-term dimensional consistency, helping customers achieve peak production efficiency on their Takisawa machines.
31 Takisawa Taiwan models. Where the turret interface is published it is shown; where it is blank the interface depends on the turret actually fitted and is confirmed at enquiry.
| Machine model | Turret interface (where published) | Turret |
|---|---|---|
| EX-3.../ 5.../ 7.../ 9... | — | — |
| EX/NEX-508, 510, 908, 910 | — | — |
| EX-1500, 2000 YT/YS | — | — |
| FX-600 | — | — |
| FX-800 | — | — |
| FX-1500 (BMT45) | BMT45 | — |
| LA-150, 200 M | — | — |
| LA-250, 300 M/Y | — | — |
| LA-250 YS T12 | — | — |
| LA-250 YS/YT T15 | — | — |
| LA-250 YS II T15 (BMT65) | BMT65 | — |
| LA-350, 450 M/Y | — | — |
| LA-350,450 M/Y (BMT75) | BMT75 | — |
| LS-800 M/Y | — | — |
| LS-1000M | — | — |
| LX-2500, 3000M/Y | — | — |
| LX-2500, 3000M/Y (BMT65) | BMT65 | — |
| MX-800 | — | — |
| NEX-108, 110 M/Y | — | — |
| NEX-110Y (BMT65) | BMT65 | — |
| NEX-315, 715 | — | — |
| NT-2500 M | — | — |
| NX-2000 M/MS/Y/YS T12 | — | — |
| NX-2500 T12 | — | — |
| NX-2500 T12 (BMT65) | BMT65 | — |
| NX-2500 T15 | — | — |
| NX-2500 T15 (BMT65) | BMT65 | — |
| UX-2000 (BMT55) | BMT55 | — |
| VTL-450 M | — | — |
| VTL-750, 760 M | — | — |
| VTL-950, 1100 M | — | — |
All machine builders for 0° driven tools →
The machine model alone does not decide the holder. The same model can leave the factory with different turrets — station count, model suffix and key arrangement all change the mounting. Tell us the machine, the turret and the operation and we confirm the mounting before quoting.
Already using another brand? Send the drawing or the article number of the holder you run today and Mongtec will convert it to an equivalent Mongtec holder — same mounting, same reach, same output.