Radial (90°) driven tool holders turn the drive through a right angle so the cutter works on the outside diameter — cross holes, cross tapping, flats, slots and keyways. Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, builds them to mount on Takisawa Taiwan turrets, published for BMT45, BMT55, BMT65, BMT75.
Developed specifically for the lateral machining requirements of Takisawa Taiwan multitasking centers. Combining high-rigidity 90° transmission technology, these tools are designed to provide robust and stable radial cutting power. These toolholders meet the demands of various complex lateral drilling, milling, and tapping operations, helping customers achieve highly precise process integration on their Takisawa machines.
31 Takisawa Taiwan models. Where the turret interface is published it is shown; where it is blank the interface depends on the turret actually fitted and is confirmed at enquiry.
| Machine model | Turret interface (where published) | Turret |
|---|---|---|
| EX-3.../ 5.../ 7.../ 9... | — | — |
| EX/NEX-508, 510, 908, 910 | — | — |
| EX-1500, 2000 YT/YS | — | — |
| FX-600 | — | — |
| FX-800 | — | — |
| FX-1500 (BMT45) | BMT45 | — |
| LA-150, 200 M | — | — |
| LA-250, 300 M/Y | — | — |
| LA-250 YS T12 | — | — |
| LA-250 YS/YT T15 | — | — |
| LA-250 YS II T15 (BMT65) | BMT65 | — |
| LA-350, 450 M/Y | — | — |
| LA-350,450 M/Y (BMT75) | BMT75 | — |
| LS-800 M/Y | — | — |
| LS-1000M | — | — |
| LX-2500, 3000M/Y | — | — |
| LX-2500, 3000M/Y (BMT65) | BMT65 | — |
| MX-800 | — | — |
| NEX-108, 110 M/Y | — | — |
| NEX-110Y (BMT65) | BMT65 | — |
| NEX-315, 715 | — | — |
| NT-2500 M | — | — |
| NX-2000 M/MS/Y/YS T12 | — | — |
| NX-2500 T12 | — | — |
| NX-2500 T12 (BMT65) | BMT65 | — |
| NX-2500 T15 | — | — |
| NX-2500 T15 (BMT65) | BMT65 | — |
| UX-2000 (BMT55) | BMT55 | — |
| VTL-450 M | — | — |
| VTL-750, 760 M | — | — |
| VTL-950, 1100 M | — | — |
All machine builders for 90° driven tools →
The machine model alone does not decide the holder. The same model can leave the factory with different turrets — station count, model suffix and key arrangement all change the mounting. Tell us the machine, the turret and the operation and we confirm the mounting before quoting.
Already using another brand? Send the drawing or the article number of the holder you run today and Mongtec will convert it to an equivalent Mongtec holder — same mounting, same reach, same output.