Universal holders let the output be set at any angle between 0° and 90°, so angled holes and angled faces are cut without a dedicated holder for each angle. Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, builds them to mount on Takisawa Taiwan turrets, published for BMT45, BMT55, BMT65, BMT75.
Developed specifically for the angular machining requirements of Takisawa Taiwan multitasking centers. Featuring a wide-range angle adjustment capability, it is designed to tackle unconventional machining challenges with ease. This toolholder allows for precise angle settings, enabling Takisawa machines to perform angular drilling, tilt-surface milling, and multi-angle compound operations—providing maximum flexibility for complex part manufacturing.
31 Takisawa Taiwan models. Where the turret interface is published it is shown; where it is blank the interface depends on the turret actually fitted and is confirmed at enquiry.
| Machine model | Turret interface (where published) | Turret |
|---|---|---|
| EX-3.../ 5.../ 7.../ 9... | — | — |
| EX/NEX-508, 510, 908, 910 | — | — |
| EX-1500, 2000 YT/YS | — | — |
| FX-600 | — | — |
| FX-800 | — | — |
| FX-1500 (BMT45) | BMT45 | — |
| LA-150, 200 M | — | — |
| LA-250, 300 M/Y | — | — |
| LA-250 YS T12 | — | — |
| LA-250 YS/YT T15 | — | — |
| LA-250 YS II T15 (BMT65) | BMT65 | — |
| LA-350, 450 M/Y | — | — |
| LA-350,450 M/Y (BMT75) | BMT75 | — |
| LS-800 M/Y | — | — |
| LS-1000M | — | — |
| LX-2500, 3000M/Y | — | — |
| LX-2500, 3000M/Y (BMT65) | BMT65 | — |
| MX-800 | — | — |
| NEX-108, 110 M/Y | — | — |
| NEX-110Y (BMT65) | BMT65 | — |
| NEX-315, 715 | — | — |
| NT-2500 M | — | — |
| NX-2000 M/MS/Y/YS T12 | — | — |
| NX-2500 T12 | — | — |
| NX-2500 T12 (BMT65) | BMT65 | — |
| NX-2500 T15 | — | — |
| NX-2500 T15 (BMT65) | BMT65 | — |
| UX-2000 (BMT55) | BMT55 | — |
| VTL-450 M | — | — |
| VTL-750, 760 M | — | — |
| VTL-950, 1100 M | — | — |
All machine builders for universal driven tools →
The machine model alone does not decide the holder. The same model can leave the factory with different turrets — station count, model suffix and key arrangement all change the mounting. Tell us the machine, the turret and the operation and we confirm the mounting before quoting.
Already using another brand? Send the drawing or the article number of the holder you run today and Mongtec will convert it to an equivalent Mongtec holder — same mounting, same reach, same output.