Universal holders let the output be set at any angle between 0° and 90°, so angled holes and angled faces are cut without a dedicated holder for each angle. Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, supplies them to mount on Accuway turrets, published for BMT40, BMT55, BMT65, VDI30.
Engineered specifically for Accuway multitasking turning-milling centers, our Universal Driven Tools feature multi-angle adjustment capabilities to meet the most demanding requirements for complex angular machining.
Through its adjustable-angle design, the machine can flexibly perform angular hole drilling, variable-angle milling, and special pattern machining. This effectively expands the machining range while reducing the need for secondary setups and reliance on specialized fixtures on your Accuway machines.
14 Accuway models. Where the turret interface is published it is shown; where it is blank the interface depends on the turret actually fitted and is confirmed at enquiry.
| Machine model | Turret interface (where published) | Turret |
|---|---|---|
| JL-51 T2Y (left turret) | — | — |
| UA-200 Y | — | — |
| UA-330 LY | — | — |
| UA-1500 T2Y2 | — | — |
| UA-1500 T2Y | — | — |
| UL-51 T2Y2 | — | — |
| UT-100 M (VDI30) | VDI30 | — |
| UT-100, 200 Y (BMT55) | BMT55 | — |
| UT-200 Y/SY, UZ-2000 (BMT40) | BMT40 | — |
| UT-300 M/Y/SY (APT-40 turret) | — | — |
| UT-300 M/SM (BMT65) | BMT65 | — |
| UT-300 Y (BMT65) | BMT65 | — |
| UT-2000 T2M (BMT40) | BMT40 | — |
| UZ-2000 T2Y (BMT65) | BMT65 | — |
All machine builders for universal driven tools →
The machine model alone does not decide the holder. The same model can leave the factory with different turrets — station count, model suffix and key arrangement all change the mounting. Tell us the machine, the turret and the operation and we confirm the mounting before quoting.
Already using another brand? Send the drawing or the article number of the holder you run today and Mongtec will convert it to an equivalent Mongtec holder — same mounting, same reach, same output.
Mongtec publishes universal driven tool holders for 14 Accuway machine models, on turret interfaces BMT40, BMT55, BMT65, VDI30. On these machines the holder is used for switching between axial and radial work from one station, on jobs where turret stations are scarce. Article numbers are matched to the machine at RFQ — we confirm the turret interface from the builder’s drawing rather than assume it from the model name.
Accuway machine not on this list? Send the model and we confirm the interface →