Universal holders let the output be set at any angle between 0° and 90°, so angled holes and angled faces are cut without a dedicated holder for each angle. Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, supplies them to mount on Victor turrets, published for BMT55, BMT65, BMT75.
Developed specifically for the angular machining requirements of Victor Taichung multitasking centers. Featuring flexible angle adjustment capabilities designed to tackle complex sloped-surface machining challenges with ease. This toolholder allows for precise angle settings, enabling Victor machines to perform angular drilling, tilt-surface milling, and multi-angle compound operations—providing maximum processing flexibility within limited turret space.
26 Victor models. Where the turret interface is published it is shown; where it is blank the interface depends on the turret actually fitted and is confirmed at enquiry.
| Machine model | Turret interface (where published) | Turret |
|---|---|---|
| VTurn II-16/20CV (DIN1809) | — | — |
| VTurn II-16/20CV (DIN5480) | — | — |
| VTurn II-16/20YCV | — | — |
| VTurn II-23/26CV (DIN1809) | — | — |
| VTurn II-23/26CV (DIN5480) | — | — |
| VTurn II-23/26BCV, YCV | — | — |
| VTurn-36CV (DIN5482) | — | — |
| VTurn-36/40/45/46CV (DIN5480) | — | — |
| VTurn-40/45CM (BMT75) | BMT75 | — |
| VTurn-40/45YCM (BMT75) | BMT75 | — |
| VTurn-A16/20CV (DIN5480) | — | — |
| VTurn-A16/20/200CM, SCM, YCM, YSCM | — | — |
| VTurn-A16/20SCV, YCV, YSCV | — | — |
| VTurn-A26CV | — | — |
| VTurn-A260YCM, YSCM (16ST, BMT55) | BMT55 | 16-station |
| VTurn-A26/260SCM, YSCM (12ST, BMT65) | BMT65 | 12-station |
| VTurn-A26SCV, YCV, YSCV | — | — |
| VTurn-NP16CM | — | — |
| VTurn-NP20CM, S20CM | — | — |
| VTurn-Q200T2Y2/T3Y3 | — | — |
| VTurn-S26CM | — | — |
| VTurn-S36CM | — | — |
| VTurn-V560CV | — | — |
| VTurn-V760CV | — | — |
| VTurn-V760CM (BMT75) | BMT75 | — |
| VTurn-V1000 (CM) | — | — |
All machine builders for universal driven tools →
The machine model alone does not decide the holder. The same model can leave the factory with different turrets — station count, model suffix and key arrangement all change the mounting. Tell us the machine, the turret and the operation and we confirm the mounting before quoting.
Already using another brand? Send the drawing or the article number of the holder you run today and Mongtec will convert it to an equivalent Mongtec holder — same mounting, same reach, same output.
Mongtec publishes universal driven tool holders for 24 Victor machine models, on turret interfaces BMT55, BMT65, BMT75. On these machines the holder is used for switching between axial and radial work from one station, on jobs where turret stations are scarce. Article numbers are matched to the machine at RFQ — we confirm the turret interface from the builder’s drawing rather than assume it from the model name.
Victor machine not on this list? Send the model and we confirm the interface →