Universal holders let the output be set at any angle between 0° and 90°, so angled holes and angled faces are cut without a dedicated holder for each angle. Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, supplies them to mount on CMZ turrets.
Engineered specifically for CMZ multitasking turning-milling centers, our Universal Driven Tools feature superior multi-angle adjustment capabilities designed to tackle the most complex angular machining challenges. Through its flexible adjustable-angle design, CMZ machines can precisely perform angular hole drilling, variable-angle milling, and special pattern machining, effectively expanding the machining range and significantly enhancing process integration.
13 CMZ models. Where the turret interface is published it is shown; where it is blank the interface depends on the turret actually fitted and is confirmed at enquiry.
| Machine model | Turret interface (where published) | Turret |
|---|---|---|
| TA 15, 20 ,25, 30 (S) | — | — |
| TA 15, 20, 25, 30 M/MS/Y/YS (15 ST) | — | 15-station |
| TA 15, 20, 25, 30 M/MS/Y/YS | — | — |
| TA Z400, 640, 1100 (15 ST) | — | 15-station |
| TBI-520 A/B/C -MC | — | — |
| TC 15, 20, 25, 30, 35 (S) | — | — |
| TC 15, 20, 25, 30, 35 M/MS/Y/YS (12/16 ST) | — | 16-station |
| TD 15-55 M/MS/Y/YS (15 ST) | — | 15-station |
| TD 15-55 M/MS/Y/YS (12/16 ST) | — | 16-station |
| TL 20, 25A, 25B | — | — |
| TL 20, 25A, 25B M/TM/MS | — | — |
| TTL / TX 52, 66 | — | — |
| TTS 38, 46, 52, 66 M/Y | — | — |
All machine builders for universal driven tools →
The machine model alone does not decide the holder. The same model can leave the factory with different turrets — station count, model suffix and key arrangement all change the mounting. Tell us the machine, the turret and the operation and we confirm the mounting before quoting.
Already using another brand? Send the drawing or the article number of the holder you run today and Mongtec will convert it to an equivalent Mongtec holder — same mounting, same reach, same output.
Mongtec publishes universal driven tool holders for 11 CMZ machine models. On these machines the holder is used for switching between axial and radial work from one station, on jobs where turret stations are scarce. Article numbers are matched to the machine at RFQ — we confirm the turret interface from the builder’s drawing rather than assume it from the model name.
CMZ machine not on this list? Send the model and we confirm the interface →