Speeder holders step the turret drive up so small-diameter cutters reach their correct surface speed on a lathe whose driven-tool spindle cannot turn fast enough. Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, supplies them to mount on CMZ turrets.
Specially developed to meet the high-speed machining requirements of CMZ multitasking turning-milling centers, these tools utilize an internal precision speed-increasing mechanism to significantly boost tool output RPM. They are the perfect solution for small-diameter drilling and high-speed precision milling. Even when the machine's spindle speed is limited, these speeders provide stable and efficient high-speed output, significantly improving machining efficiency and surface quality.
13 CMZ models. Where the turret interface is published it is shown; where it is blank the interface depends on the turret actually fitted and is confirmed at enquiry.
| Machine model | Turret interface (where published) | Turret |
|---|---|---|
| TA 15, 20 ,25, 30 (S) | — | — |
| TA 15, 20, 25, 30 M/MS/Y/YS (15 ST) | — | 15-station |
| TA 15, 20, 25, 30 M/MS/Y/YS | — | — |
| TA Z400, 640, 1100 (15 ST) | — | 15-station |
| TBI-520 A/B/C -MC | — | — |
| TC 15, 20, 25, 30, 35 (S) | — | — |
| TC 15, 20, 25, 30, 35 M/MS/Y/YS (12/16 ST) | — | 16-station |
| TD 15-55 M/MS/Y/YS (15 ST) | — | 15-station |
| TD 15-55 M/MS/Y/YS (12/16 ST) | — | 16-station |
| TL 20, 25A, 25B | — | — |
| TL 20, 25A, 25B M/TM/MS | — | — |
| TTL / TX 52, 66 | — | — |
| TTS 38, 46, 52, 66 M/Y | — | — |
All machine builders for speeder driven tools →
The machine model alone does not decide the holder. The same model can leave the factory with different turrets — station count, model suffix and key arrangement all change the mounting. Tell us the machine, the turret and the operation and we confirm the mounting before quoting.
Already using another brand? Send the drawing or the article number of the holder you run today and Mongtec will convert it to an equivalent Mongtec holder — same mounting, same reach, same output.
Mongtec publishes speed-increaser holders for 11 CMZ machine models. On these machines the holder is used for running small-diameter drills, engraving cutters and thread mills at spindle speeds the turret drive alone cannot reach. Article numbers are matched to the machine at RFQ — we confirm the turret interface from the builder’s drawing rather than assume it from the model name.
CMZ machine not on this list? Send the model and we confirm the interface →