Speeder holders step the turret drive up so small-diameter cutters reach their correct surface speed on a lathe whose driven-tool spindle cannot turn fast enough. Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, builds them to mount on Goodway turrets.
Developed specifically for Goodway multitasking centers, designed to break through the RPM limits of traditional turrets. Through an internal high-precision speed-increasing mechanism, these tools significantly boost output RPM, perfectly solving the issue of insufficient cutting speed in small-diameter drilling, micro-machining, and high-speed precision milling. Even at the turret’s base RPM, they provide stable and high-efficiency high-speed power, helping Goodway users expand their machining application range.
35 Goodway models. Where the turret interface is published it is shown; where it is blank the interface depends on the turret actually fitted and is confirmed at enquiry.
| Machine model | Turret interface (where published) | Turret |
|---|---|---|
| GA-2000-3600 M | — | — |
| GA-3000, 3300, 3600 | — | — |
| GLA-1500 M | — | — |
| GLS-150 M (Bevel Gear Drive) | — | — |
| GLS-150, 200 M/Y (new turret version) | — | — |
| GLS-1500, 2000 M/LY/LMS/LYS | — | — |
| GLS-2800, 3000, 3300 M/Y/MS/YS | — | — |
| GMS-2000 ST (15 station turret) | — | — |
| GMT-2000 | — | — |
| GS-200, 260, 280 M/MS | — | — |
| GS-400, 600, 6000, 6600, 8000, 8800 M | — | — |
| GS-400 M (old turret version) | — | — |
| GS-2000 - 4000 M/Y/MS/YS (12 station turret) | — | — |
| GS-2000 - 3300 M/Y/MS/YS (16 station turret) | — | — |
| GS-3000, 3300, 3600 alpha | — | — |
| GS-4000, 4300 L | — | — |
| GS-6000 | — | — |
| GTH-2000, 2600 M | — | — |
| GTS-150 M (Bevel Gear Drive) | — | — |
| GTS-150 MMX/XY (new turret version) | — | — |
| GTS-200, 260 MMX/XY (new turret version) | — | — |
| GTW-1500 | — | — |
| GTX/GTZ-2000, 2600 M/Y (12 station turret) | — | — |
| GTX/GTZ-2000, 2600 M/Y (16 station turret) | — | — |
| GTZ-1500Y | — | — |
| GV-500, 780 M | — | — |
| GV-800, 1000 M | — | — |
| SK-38 | — | — |
| SW-12 | — | — |
| SW-20 | — | — |
| SW-20II | — | — |
| SW-32, SW-32II | — | — |
| SW-42 | — | — |
| TS-100 M | — | — |
| WE-1500, 2000 /L/LY | — | — |
All machine builders for speeder driven tools →
The machine model alone does not decide the holder. The same model can leave the factory with different turrets — station count, model suffix and key arrangement all change the mounting. Tell us the machine, the turret and the operation and we confirm the mounting before quoting.
Already using another brand? Send the drawing or the article number of the holder you run today and Mongtec will convert it to an equivalent Mongtec holder — same mounting, same reach, same output.