ID static holders carry boring bars and internal turning tools, sized to the turret's bore and clamped on the same mounting as the rest of the station. Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, builds them to mount on Goodway turrets.
Developed specifically for Goodway high-performance multitasking centers, providing robust support for internal turning, drilling, and boring operations. Optimized for the high-rigidity interface of Goodway turrets (such as GLS, GA, and GS series), these toolholders feature a precision-guided structure designed to ensure exceptional axial accuracy and vibration damping once the tool is clamped—helping customers achieve ultra-fine internal machining quality on their Goodway machines.
35 Goodway models. Where the turret interface is published it is shown; where it is blank the interface depends on the turret actually fitted and is confirmed at enquiry.
| Machine model | Turret interface (where published) | Turret |
|---|---|---|
| GA-2000-3600 M | — | — |
| GA-3000, 3300, 3600 | — | — |
| GLA-1500 M | — | — |
| GLS-150 M (Bevel Gear Drive) | — | — |
| GLS-150, 200 M/Y (new turret version) | — | — |
| GLS-1500, 2000 M/LY/LMS/LYS | — | — |
| GLS-2800, 3000, 3300 M/Y/MS/YS | — | — |
| GMS-2000 ST (15 station turret) | — | — |
| GMT-2000 | — | — |
| GS-200, 260, 280 M/MS | — | — |
| GS-400, 600, 6000, 6600, 8000, 8800 M | — | — |
| GS-400 M (old turret version) | — | — |
| GS-2000 - 4000 M/Y/MS/YS (12 station turret) | — | — |
| GS-2000 - 3300 M/Y/MS/YS (16 station turret) | — | — |
| GS-3000, 3300, 3600 alpha | — | — |
| GS-4000, 4300 L | — | — |
| GS-6000 | — | — |
| GTH-2000, 2600 M | — | — |
| GTS-150 M (Bevel Gear Drive) | — | — |
| GTS-150 MMX/XY (new turret version) | — | — |
| GTS-200, 260 MMX/XY (new turret version) | — | — |
| GTW-1500 | — | — |
| GTX/GTZ-2000, 2600 M/Y (12 station turret) | — | — |
| GTX/GTZ-2000, 2600 M/Y (16 station turret) | — | — |
| GTZ-1500Y | — | — |
| GV-500, 780 M | — | — |
| GV-800, 1000 M | — | — |
| SK-38 | — | — |
| SW-12 | — | — |
| SW-20 | — | — |
| SW-20II | — | — |
| SW-32, SW-32II | — | — |
| SW-42 | — | — |
| TS-100 M | — | — |
| WE-1500, 2000 /L/LY | — | — |
All machine builders for id static toolholders →
The machine model alone does not decide the holder. The same model can leave the factory with different turrets — station count, model suffix and key arrangement all change the mounting. Tell us the machine, the turret and the operation and we confirm the mounting before quoting.
Already using another brand? Send the drawing or the article number of the holder you run today and Mongtec will convert it to an equivalent Mongtec holder — same mounting, same reach, same output.