ID static holders carry boring bars and internal turning tools, sized to the turret's bore and clamped on the same mounting as the rest of the station. Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, supplies them to mount on Accuway turrets, published for BMT40, BMT55, BMT65, VDI30.
Developed specifically for Accuway multitasking centers. Optimized for the high-precision positioning characteristics of Accuway turrets, these holders provide rigid support for internal turning, drilling, and boring operations. The body is crafted from high-quality alloy steel and precision-ground to ensure exceptional axial accuracy and vibration damping during deep-hole or heavy-duty boring—perfectly embodying the high-precision cutting value of Accuway machines.
14 Accuway models. Where the turret interface is published it is shown; where it is blank the interface depends on the turret actually fitted and is confirmed at enquiry.
| Machine model | Turret interface (where published) | Turret |
|---|---|---|
| JL-51 T2Y (left turret) | — | — |
| UA-200 Y | — | — |
| UA-330 LY | — | — |
| UA-1500 T2Y2 | — | — |
| UA-1500 T2Y | — | — |
| UL-51 T2Y2 | — | — |
| UT-100 M (VDI30) | VDI30 | — |
| UT-100, 200 Y (BMT55) | BMT55 | — |
| UT-200 Y/SY, UZ-2000 (BMT40) | BMT40 | — |
| UT-300 M/Y/SY (APT-40 turret) | — | — |
| UT-300 M/SM (BMT65) | BMT65 | — |
| UT-300 Y (BMT65) | BMT65 | — |
| UT-2000 T2M (BMT40) | BMT40 | — |
| UZ-2000 T2Y (BMT65) | BMT65 | — |
All machine builders for id static toolholders →
The machine model alone does not decide the holder. The same model can leave the factory with different turrets — station count, model suffix and key arrangement all change the mounting. Tell us the machine, the turret and the operation and we confirm the mounting before quoting.
Already using another brand? Send the drawing or the article number of the holder you run today and Mongtec will convert it to an equivalent Mongtec holder — same mounting, same reach, same output.
Mongtec publishes static ID boring bar holders for 14 Accuway machine models, on turret interfaces BMT40, BMT55, BMT65, VDI30. On these machines the holder is used for holding boring bars for internal turning, boring and internal grooving. Article numbers are matched to the machine at RFQ — we confirm the turret interface from the builder’s drawing rather than assume it from the model name.
Accuway machine not on this list? Send the model and we confirm the interface →