ID static holders carry boring bars and internal turning tools, sized to the turret's bore and clamped on the same mounting as the rest of the station. Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, supplies them to mount on Victor turrets, published for BMT55, BMT65, BMT75.
Developed specifically for Victor Taichung high-performance turning centers, providing robust support for internal turning, drilling, and heavy-duty boring operations. Optimized for the high-rigidity interface of Victor Taichung turrets (such as the Vturn-16/20/26/36 series), these toolholders ensure exceptional axial accuracy and vibration damping during large-diameter internal machining—helping customers achieve stable and precise internal machining quality on their Victor machines.
26 Victor models. Where the turret interface is published it is shown; where it is blank the interface depends on the turret actually fitted and is confirmed at enquiry.
| Machine model | Turret interface (where published) | Turret |
|---|---|---|
| VTurn II-16/20CV (DIN1809) | — | — |
| VTurn II-16/20CV (DIN5480) | — | — |
| VTurn II-16/20YCV | — | — |
| VTurn II-23/26CV (DIN1809) | — | — |
| VTurn II-23/26CV (DIN5480) | — | — |
| VTurn II-23/26BCV, YCV | — | — |
| VTurn-36CV (DIN5482) | — | — |
| VTurn-36/40/45/46CV (DIN5480) | — | — |
| VTurn-40/45CM (BMT75) | BMT75 | — |
| VTurn-40/45YCM (BMT75) | BMT75 | — |
| VTurn-A16/20CV (DIN5480) | — | — |
| VTurn-A16/20/200CM, SCM, YCM, YSCM | — | — |
| VTurn-A16/20SCV, YCV, YSCV | — | — |
| VTurn-A26CV | — | — |
| VTurn-A260YCM, YSCM (16ST, BMT55) | BMT55 | 16-station |
| VTurn-A26/260SCM, YSCM (12ST, BMT65) | BMT65 | 12-station |
| VTurn-A26SCV, YCV, YSCV | — | — |
| VTurn-NP16CM | — | — |
| VTurn-NP20CM, S20CM | — | — |
| VTurn-Q200T2Y2/T3Y3 | — | — |
| VTurn-S26CM | — | — |
| VTurn-S36CM | — | — |
| VTurn-V560CV | — | — |
| VTurn-V760CV | — | — |
| VTurn-V760CM (BMT75) | BMT75 | — |
| VTurn-V1000 (CM) | — | — |
All machine builders for id static toolholders →
The machine model alone does not decide the holder. The same model can leave the factory with different turrets — station count, model suffix and key arrangement all change the mounting. Tell us the machine, the turret and the operation and we confirm the mounting before quoting.
Already using another brand? Send the drawing or the article number of the holder you run today and Mongtec will convert it to an equivalent Mongtec holder — same mounting, same reach, same output.
Mongtec publishes static ID boring bar holders for 24 Victor machine models, on turret interfaces BMT55, BMT65, BMT75. On these machines the holder is used for holding boring bars for internal turning, boring and internal grooving. Article numbers are matched to the machine at RFQ — we confirm the turret interface from the builder’s drawing rather than assume it from the model name.
Victor machine not on this list? Send the model and we confirm the interface →