OD static holders clamp turning tools for outside-diameter work — the non-driven stations of the turret, matched to the same bolt pattern as the driven holders. Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, supplies them to mount on Victor turrets, published for BMT55, BMT65, BMT75.
Designed specifically for Victor Taichung high-performance turning centers. The housing is manufactured from premium alloy steel with integrated heat treatment, providing ultimate clamping rigidity. Optimized for the heavy-duty cutting requirements of Victor Taichung turrets (such as the Vturn-16/20/26/36 series), these toolholders ensure long-term stability and vibration damping during both rough and precision O.D. turning operations, embodying the legendary stability of Victor machines.
26 Victor models. Where the turret interface is published it is shown; where it is blank the interface depends on the turret actually fitted and is confirmed at enquiry.
| Machine model | Turret interface (where published) | Turret |
|---|---|---|
| VTurn II-16/20CV (DIN1809) | — | — |
| VTurn II-16/20CV (DIN5480) | — | — |
| VTurn II-16/20YCV | — | — |
| VTurn II-23/26CV (DIN1809) | — | — |
| VTurn II-23/26CV (DIN5480) | — | — |
| VTurn II-23/26BCV, YCV | — | — |
| VTurn-36CV (DIN5482) | — | — |
| VTurn-36/40/45/46CV (DIN5480) | — | — |
| VTurn-40/45CM (BMT75) | BMT75 | — |
| VTurn-40/45YCM (BMT75) | BMT75 | — |
| VTurn-A16/20CV (DIN5480) | — | — |
| VTurn-A16/20/200CM, SCM, YCM, YSCM | — | — |
| VTurn-A16/20SCV, YCV, YSCV | — | — |
| VTurn-A26CV | — | — |
| VTurn-A260YCM, YSCM (16ST, BMT55) | BMT55 | 16-station |
| VTurn-A26/260SCM, YSCM (12ST, BMT65) | BMT65 | 12-station |
| VTurn-A26SCV, YCV, YSCV | — | — |
| VTurn-NP16CM | — | — |
| VTurn-NP20CM, S20CM | — | — |
| VTurn-Q200T2Y2/T3Y3 | — | — |
| VTurn-S26CM | — | — |
| VTurn-S36CM | — | — |
| VTurn-V560CV | — | — |
| VTurn-V760CV | — | — |
| VTurn-V760CM (BMT75) | BMT75 | — |
| VTurn-V1000 (CM) | — | — |
All machine builders for od static toolholders →
The machine model alone does not decide the holder. The same model can leave the factory with different turrets — station count, model suffix and key arrangement all change the mounting. Tell us the machine, the turret and the operation and we confirm the mounting before quoting.
Already using another brand? Send the drawing or the article number of the holder you run today and Mongtec will convert it to an equivalent Mongtec holder — same mounting, same reach, same output.
Mongtec publishes static OD turning holders for 24 Victor machine models, on turret interfaces BMT55, BMT65, BMT75. On these machines the holder is used for holding square-shank turning, facing, grooving and parting tools for outside-diameter work. Article numbers are matched to the machine at RFQ — we confirm the turret interface from the builder’s drawing rather than assume it from the model name.
Victor machine not on this list? Send the model and we confirm the interface →