OD static holders clamp turning tools for outside-diameter work — the non-driven stations of the turret, matched to the same bolt pattern as the driven holders. Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, builds them to mount on Nakamura Tome turrets.
Designed specifically for Nakamura-Tome high-end multitasking centers. The housing is manufactured from high-quality alloy steel with integrated heat treatment, providing ultimate clamping rigidity. Tailored to the high-precision positioning and rapid tool-change requirements of Nakamura-Tome turrets (such as the WY, AS, and SC series), these toolholders ensure long-term stability and vibration damping during both rough and precision O.D. turning operations.
40 Nakamura Tome models. Where the turret interface is published it is shown; where it is blank the interface depends on the turret actually fitted and is confirmed at enquiry.
| Machine model | Turret interface (where published) | Turret |
|---|---|---|
| AS-200 (12 ST) | — | 12-station |
| AS-200 (15 ST) | — | 15-station |
| JX-200, 250 | — | — |
| MX-100 | — | — |
| NT-Flex (+) | — | — |
| NTJ-100 | — | — |
| NTY³-100(V), WY-100 II/V (12 ST) | — | 12-station |
| NTY³-150(V), 250, WY-150(V), 250 | — | — |
| SC-100, SC-100X² (upper turret) | — | — |
| SC-150 | — | — |
| SC-200 | — | — |
| SC-200 II (12 ST) | — | 12-station |
| SC-250 | — | — |
| SC-300 | — | — |
| SC-300 II (12 ST) | — | 12-station |
| SC-300 II (16 ST) | — | 16-station |
| SC-450 | — | — |
| STS-40 | — | — |
| STW-40 | — | — |
| Super Mill SC-200L (Capto Turret) | — | — |
| Super Mill SC-200L | — | — |
| Super Mill WT-150 (Capto Turret) | — | — |
| Super Mill WT-150, WT-150 II | — | — |
| Super Mill WY-250 (Capto Turret) | — | — |
| Super Mill WY-250 | — | — |
| Super NTJ | — | — |
| Super NTJX | — | — |
| Super NTM³ | — | — |
| Super NTMX, MX-5 | — | — |
| Super NTX | — | — |
| Super NTY³ Jumbo (16 ST) | — | 16-station |
| TW-20 (12 ST) | — | 12-station |
| TW-10, TW-20 (16 ST) | — | 16-station |
| TW-30 | — | — |
| WTS-150, WTW-150 | — | — |
| WT-100 | — | — |
| WT-150, WT-150 II, WT-250 II | — | — |
| WT-150 II (Capto Turret) | — | — |
| WT-250 | — | — |
| WT-300 | — | — |
All machine builders for od static toolholders →
The machine model alone does not decide the holder. The same model can leave the factory with different turrets — station count, model suffix and key arrangement all change the mounting. Tell us the machine, the turret and the operation and we confirm the mounting before quoting.
Already using another brand? Send the drawing or the article number of the holder you run today and Mongtec will convert it to an equivalent Mongtec holder — same mounting, same reach, same output.