Universal holders let the output be set at any angle between 0° and 90°, so angled holes and angled faces are cut without a dedicated holder for each angle. Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, builds them to mount on Goodway turrets.
Tailor-made for Goodway multitasking centers, featuring flexible angle adjustment capabilities designed to tackle complex angular machining challenges with ease. This toolholder allows for precise angle settings, enabling the machine to perform angular drilling, tilt-surface milling, and multi-angle compound operations. Combining a high-rigidity locking mechanism with precision transmission technology, it significantly expands the machining range of Goodway NL, GLS, and GTH series machines.
35 Goodway models. Where the turret interface is published it is shown; where it is blank the interface depends on the turret actually fitted and is confirmed at enquiry.
| Machine model | Turret interface (where published) | Turret |
|---|---|---|
| GA-2000-3600 M | — | — |
| GA-3000, 3300, 3600 | — | — |
| GLA-1500 M | — | — |
| GLS-150 M (Bevel Gear Drive) | — | — |
| GLS-150, 200 M/Y (new turret version) | — | — |
| GLS-1500, 2000 M/LY/LMS/LYS | — | — |
| GLS-2800, 3000, 3300 M/Y/MS/YS | — | — |
| GMS-2000 ST (15 station turret) | — | — |
| GMT-2000 | — | — |
| GS-200, 260, 280 M/MS | — | — |
| GS-400, 600, 6000, 6600, 8000, 8800 M | — | — |
| GS-400 M (old turret version) | — | — |
| GS-2000 - 4000 M/Y/MS/YS (12 station turret) | — | — |
| GS-2000 - 3300 M/Y/MS/YS (16 station turret) | — | — |
| GS-3000, 3300, 3600 alpha | — | — |
| GS-4000, 4300 L | — | — |
| GS-6000 | — | — |
| GTH-2000, 2600 M | — | — |
| GTS-150 M (Bevel Gear Drive) | — | — |
| GTS-150 MMX/XY (new turret version) | — | — |
| GTS-200, 260 MMX/XY (new turret version) | — | — |
| GTW-1500 | — | — |
| GTX/GTZ-2000, 2600 M/Y (12 station turret) | — | — |
| GTX/GTZ-2000, 2600 M/Y (16 station turret) | — | — |
| GTZ-1500Y | — | — |
| GV-500, 780 M | — | — |
| GV-800, 1000 M | — | — |
| SK-38 | — | — |
| SW-12 | — | — |
| SW-20 | — | — |
| SW-20II | — | — |
| SW-32, SW-32II | — | — |
| SW-42 | — | — |
| TS-100 M | — | — |
| WE-1500, 2000 /L/LY | — | — |
All machine builders for universal driven tools →
The machine model alone does not decide the holder. The same model can leave the factory with different turrets — station count, model suffix and key arrangement all change the mounting. Tell us the machine, the turret and the operation and we confirm the mounting before quoting.
Already using another brand? Send the drawing or the article number of the holder you run today and Mongtec will convert it to an equivalent Mongtec holder — same mounting, same reach, same output.