Universal holders let the output be set at any angle between 0° and 90°, so angled holes and angled faces are cut without a dedicated holder for each angle. Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, supplies them to mount on Okuma turrets, published for VDI30, VDI40, VDI60.
Developed specifically for the angular machining requirements of Okuma multitasking centers. Featuring flexible angle adjustment capabilities designed to tackle complex sloped-surface machining challenges with ease. This toolholder allows for precise angle settings, enabling Okuma machines to perform angular drilling, tilt-surface milling, and multi-angle compound operations—helping customers achieve maximum process integration flexibility within limited turret space.
45 Okuma models. Where the turret interface is published it is shown; where it is blank the interface depends on the turret actually fitted and is confirmed at enquiry.
| Machine model | Turret interface (where published) | Turret |
|---|---|---|
| Captain L370 M | — | — |
| Captain L370 MW | — | — |
| Captain L470 M | — | — |
| ES L6, L8 | — | — |
| ES L6 M | — | — |
| ES L8 M | — | — |
| ES L10 | — | — |
| ES L10 M | — | — |
| GENOS L200, L2000-e M/MY (VDI30) | VDI30 | — |
| GENOS L250, L2000 (8 station turret) | — | — |
| GENOS L250, L2000 (12 station turret) | — | — |
| GENOS L300, L3000-e M/MY (VDI40) | VDI40 | — |
| GENOS L300 MW/MYW, L3000-e M/MY/MYW | — | — |
| GENOS L300 MW/MYW (VDI40) | VDI40 | — |
| GENOS L400, L3000-e | — | — |
| LB 2000 EX | — | — |
| LB/LU 2500, 3000 EX | — | — |
| LB 3000 EX W | — | — |
| LB/LU 2000-3000 EX (II, III) M(Y)/M(Y)W | — | — |
| LB/LU 200, 2000 M (VDI30) | VDI30 | — |
| LB 200 MY | — | — |
| LB/LU 300, 400 | — | — |
| LB/LU 300, 3000 M (VDI40) | VDI40 | — |
| LB 300 MW (Radial tooling turret) | — | — |
| LB 300 MW (Face tooling turret) | — | — |
| LB/LU 300 MY | — | — |
| LB 300 MYW | — | — |
| LB/LU 35 (II, III) M (1-step) | — | — |
| LB 4000 EX | — | — |
| LB/LU 4000 EX (II, III) M/MY/MYW | — | — |
| LB/LU 400,4000 M (VDI40) | VDI40 | — |
| LB 45III MY, LU 7000 EX M/MY | — | — |
| LB/LU 45 M (VDI60) | VDI60 | — |
| LT 2000 EX M (12 station turret) | — | — |
| LT 2000 EX M/MY (16 station turret) | — | — |
| LT 3000 EX M/MY | — | — |
| LT 200 M, LT 200 MY | — | — |
| LT 300 M, LT 300 MY | — | — |
| LT 400 M | — | — |
| LVT 300 M | — | — |
| LVT 400 M | — | — |
| MacTurn250-2S | — | — |
| MacTurn350-2S | — | — |
| Multus U3000, 4000, 5000 2SW | — | — |
| 2SP-150 H/HM | — | — |
All machine builders for universal driven tools →
The machine model alone does not decide the holder. The same model can leave the factory with different turrets — station count, model suffix and key arrangement all change the mounting. Tell us the machine, the turret and the operation and we confirm the mounting before quoting.
Already using another brand? Send the drawing or the article number of the holder you run today and Mongtec will convert it to an equivalent Mongtec holder — same mounting, same reach, same output.
Mongtec publishes universal driven tool holders for 43 Okuma machine models, on turret interfaces VDI30, VDI40, VDI60. On these machines the holder is used for switching between axial and radial work from one station, on jobs where turret stations are scarce. Article numbers are matched to the machine at RFQ — we confirm the turret interface from the builder’s drawing rather than assume it from the model name.
Okuma machine not on this list? Send the model and we confirm the interface →