Axial multi-spindle holders carry several parallel outputs on one station, so a bolt circle or a hole pattern is produced in a single stroke. Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, builds them to mount on Okuma turrets, published for VDI30, VDI40, VDI60.
Developed specifically for the high-efficiency machining requirements of Okuma multitasking centers. Featuring a dual-output spindle configuration designed to maximize machining efficiency and shorten cycle times. While maintaining the signature high-rigidity and stable transmission of Okuma turrets, these multi-axis toolholders enable dual-direction operations within a single station, helping customers achieve high-productivity process integration on their machines.
45 Okuma models. Where the turret interface is published it is shown; where it is blank the interface depends on the turret actually fitted and is confirmed at enquiry.
| Machine model | Turret interface (where published) | Turret |
|---|---|---|
| Captain L370 M | — | — |
| Captain L370 MW | — | — |
| Captain L470 M | — | — |
| ES L6, L8 | — | — |
| ES L6 M | — | — |
| ES L8 M | — | — |
| ES L10 | — | — |
| ES L10 M | — | — |
| GENOS L200, L2000-e M/MY (VDI30) | VDI30 | — |
| GENOS L250, L2000 (8 station turret) | — | — |
| GENOS L250, L2000 (12 station turret) | — | — |
| GENOS L300, L3000-e M/MY (VDI40) | VDI40 | — |
| GENOS L300 MW/MYW, L3000-e M/MY/MYW | — | — |
| GENOS L300 MW/MYW (VDI40) | VDI40 | — |
| GENOS L400, L3000-e | — | — |
| LB 2000 EX | — | — |
| LB/LU 2500, 3000 EX | — | — |
| LB 3000 EX W | — | — |
| LB/LU 2000-3000 EX (II, III) M(Y)/M(Y)W | — | — |
| LB/LU 200, 2000 M (VDI30) | VDI30 | — |
| LB 200 MY | — | — |
| LB/LU 300, 400 | — | — |
| LB/LU 300, 3000 M (VDI40) | VDI40 | — |
| LB 300 MW (Radial tooling turret) | — | — |
| LB 300 MW (Face tooling turret) | — | — |
| LB/LU 300 MY | — | — |
| LB 300 MYW | — | — |
| LB/LU 35 (II, III) M (1-step) | — | — |
| LB 4000 EX | — | — |
| LB/LU 4000 EX (II, III) M/MY/MYW | — | — |
| LB/LU 400,4000 M (VDI40) | VDI40 | — |
| LB 45III MY, LU 7000 EX M/MY | — | — |
| LB/LU 45 M (VDI60) | VDI60 | — |
| LT 2000 EX M (12 station turret) | — | — |
| LT 2000 EX M/MY (16 station turret) | — | — |
| LT 3000 EX M/MY | — | — |
| LT 200 M, LT 200 MY | — | — |
| LT 300 M, LT 300 MY | — | — |
| LT 400 M | — | — |
| LVT 300 M | — | — |
| LVT 400 M | — | — |
| MacTurn250-2S | — | — |
| MacTurn350-2S | — | — |
| Multus U3000, 4000, 5000 2SW | — | — |
| 2SP-150 H/HM | — | — |
All machine builders for 0° multi-axis driven toolholders →
The machine model alone does not decide the holder. The same model can leave the factory with different turrets — station count, model suffix and key arrangement all change the mounting. Tell us the machine, the turret and the operation and we confirm the mounting before quoting.
Already using another brand? Send the drawing or the article number of the holder you run today and Mongtec will convert it to an equivalent Mongtec holder — same mounting, same reach, same output.