Double 90° single-side twin-spindle holders place two radial spindles on the same side of one station — two cross holes at a fixed pitch in one plunge. Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, builds them to mount on Okuma turrets, published for VDI30, VDI40, VDI60.
Developed specifically for Okuma multitasking centers equipped with Y-axis functionality. Featuring a single-side twin-spindle offset design, this toolholder allows for two tools to be configured in a single station for lateral machining. By utilizing the precise Y-axis stroke of the Okuma machine, it significantly enhances tool configuration flexibility and production efficiency per setup, helping customers maximize process integration within limited turret space.
45 Okuma models. Where the turret interface is published it is shown; where it is blank the interface depends on the turret actually fitted and is confirmed at enquiry.
| Machine model | Turret interface (where published) | Turret |
|---|---|---|
| Captain L370 M | — | — |
| Captain L370 MW | — | — |
| Captain L470 M | — | — |
| ES L6, L8 | — | — |
| ES L6 M | — | — |
| ES L8 M | — | — |
| ES L10 | — | — |
| ES L10 M | — | — |
| GENOS L200, L2000-e M/MY (VDI30) | VDI30 | — |
| GENOS L250, L2000 (8 station turret) | — | — |
| GENOS L250, L2000 (12 station turret) | — | — |
| GENOS L300, L3000-e M/MY (VDI40) | VDI40 | — |
| GENOS L300 MW/MYW, L3000-e M/MY/MYW | — | — |
| GENOS L300 MW/MYW (VDI40) | VDI40 | — |
| GENOS L400, L3000-e | — | — |
| LB 2000 EX | — | — |
| LB/LU 2500, 3000 EX | — | — |
| LB 3000 EX W | — | — |
| LB/LU 2000-3000 EX (II, III) M(Y)/M(Y)W | — | — |
| LB/LU 200, 2000 M (VDI30) | VDI30 | — |
| LB 200 MY | — | — |
| LB/LU 300, 400 | — | — |
| LB/LU 300, 3000 M (VDI40) | VDI40 | — |
| LB 300 MW (Radial tooling turret) | — | — |
| LB 300 MW (Face tooling turret) | — | — |
| LB/LU 300 MY | — | — |
| LB 300 MYW | — | — |
| LB/LU 35 (II, III) M (1-step) | — | — |
| LB 4000 EX | — | — |
| LB/LU 4000 EX (II, III) M/MY/MYW | — | — |
| LB/LU 400,4000 M (VDI40) | VDI40 | — |
| LB 45III MY, LU 7000 EX M/MY | — | — |
| LB/LU 45 M (VDI60) | VDI60 | — |
| LT 2000 EX M (12 station turret) | — | — |
| LT 2000 EX M/MY (16 station turret) | — | — |
| LT 3000 EX M/MY | — | — |
| LT 200 M, LT 200 MY | — | — |
| LT 300 M, LT 300 MY | — | — |
| LT 400 M | — | — |
| LVT 300 M | — | — |
| LVT 400 M | — | — |
| MacTurn250-2S | — | — |
| MacTurn350-2S | — | — |
| Multus U3000, 4000, 5000 2SW | — | — |
| 2SP-150 H/HM | — | — |
All machine builders for double 90° single-side twin-spindle driven tools →
The machine model alone does not decide the holder. The same model can leave the factory with different turrets — station count, model suffix and key arrangement all change the mounting. Tell us the machine, the turret and the operation and we confirm the mounting before quoting.
Already using another brand? Send the drawing or the article number of the holder you run today and Mongtec will convert it to an equivalent Mongtec holder — same mounting, same reach, same output.