Double 90° single-side twin-spindle holders place two radial spindles on the same side of one station — two cross holes at a fixed pitch in one plunge. Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, builds them to mount on Takisawa Taiwan turrets, published for BMT45, BMT55, BMT65, BMT75.
Developed specifically for Takisawa Taiwan multitasking centers equipped with Y-axis functionality. Featuring a single-side twin-spindle offset design, this toolholder allows for two tools to be configured in a single station for lateral machining. By utilizing the precise Y-axis stroke of the Takisawa machine, it significantly enhances tool configuration flexibility and production efficiency per setup, helping customers maximize output within limited turret space.
31 Takisawa Taiwan models. Where the turret interface is published it is shown; where it is blank the interface depends on the turret actually fitted and is confirmed at enquiry.
| Machine model | Turret interface (where published) | Turret |
|---|---|---|
| EX-3.../ 5.../ 7.../ 9... | — | — |
| EX/NEX-508, 510, 908, 910 | — | — |
| EX-1500, 2000 YT/YS | — | — |
| FX-600 | — | — |
| FX-800 | — | — |
| FX-1500 (BMT45) | BMT45 | — |
| LA-150, 200 M | — | — |
| LA-250, 300 M/Y | — | — |
| LA-250 YS T12 | — | — |
| LA-250 YS/YT T15 | — | — |
| LA-250 YS II T15 (BMT65) | BMT65 | — |
| LA-350, 450 M/Y | — | — |
| LA-350,450 M/Y (BMT75) | BMT75 | — |
| LS-800 M/Y | — | — |
| LS-1000M | — | — |
| LX-2500, 3000M/Y | — | — |
| LX-2500, 3000M/Y (BMT65) | BMT65 | — |
| MX-800 | — | — |
| NEX-108, 110 M/Y | — | — |
| NEX-110Y (BMT65) | BMT65 | — |
| NEX-315, 715 | — | — |
| NT-2500 M | — | — |
| NX-2000 M/MS/Y/YS T12 | — | — |
| NX-2500 T12 | — | — |
| NX-2500 T12 (BMT65) | BMT65 | — |
| NX-2500 T15 | — | — |
| NX-2500 T15 (BMT65) | BMT65 | — |
| UX-2000 (BMT55) | BMT55 | — |
| VTL-450 M | — | — |
| VTL-750, 760 M | — | — |
| VTL-950, 1100 M | — | — |
All machine builders for double 90° single-side twin-spindle driven tools →
The machine model alone does not decide the holder. The same model can leave the factory with different turrets — station count, model suffix and key arrangement all change the mounting. Tell us the machine, the turret and the operation and we confirm the mounting before quoting.
Already using another brand? Send the drawing or the article number of the holder you run today and Mongtec will convert it to an equivalent Mongtec holder — same mounting, same reach, same output.