Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, supplies driven tool holders and static tooling for the Takisawa Taiwan FX-600 on the open machine-side BMT and VDI (DIN 69880) standards. The turret interface for this model is confirmed per machine configuration by Mongtec engineering at RFQ, and every driven unit ships with an individual inspection report.
| Machine brand | Takisawa Taiwan |
|---|---|
| Model | FX-600 |
| Turret interface | BMT bolt pattern 60×60 (cross-referenced from published tooling catalogues; the actual turret drawing is confirmed at RFQ) |
| Driven tool line speed | 6,000–12,000 rpm standard (up to 32,000 rpm with speed increaser) |
| Max torque | Up to 160 Nm (line capability; unit rating confirmed at RFQ) |
| Coolant | Internal / external, up to 100 bar |
| Runout | ≤0.003 mm (0° axial driven line) |
| Quality assurance | Each driven unit ships with an individual inspection report |
Same model, different turret: station count, model suffix and build year change the turret interface. Mongtec confirms the interface from the machine model and a turret photo before quoting.
TOOL HOLDER SELECTION GUIDE Ver 2026.08 (PDF, 2.6 MB)
Mongtec also supplies BMT40, BMT60, BMT68 and BMT80 holders and builder-specific interfaces (Mazak, Nakamura-Tome, Haas BOT, Okuma BOT, Muratec BOT) — the 228 article numbers published here are a subset of the range. Mongtec tooling is exported to five continents and supplied to machine-tool builders. Lead time is confirmed per item and quantity at quotation.
Request a quote for this machine
See all Takisawa Taiwan models →
Mongtec supplies BMT and VDI (DIN 69880) driven tool holders and static tooling compatible with the Takisawa Taiwan turret platform. Interface: BMT bolt pattern 60x60. The exact configuration is confirmed by Mongtec engineering at RFQ.
Yes. BMT and VDI are open machine-side standards, so switching supplier does not require any turret modification. Mongtec also publishes cross-reference pages for WTO, Heimatec, EWS, Eppinger, BIG and other brands.
Lead time is quoted per order and ships from Taichung, Taiwan. Every Mongtec driven tool holder is inspected before shipment (runout, torque, balancing) and ships with an individual inspection report.
BMT is an industry de-facto standard, not an ISO or DIN standard, so this turret is identified by its bolt-hole pattern rather than a plain BMT size number. The pattern is what actually determines whether a holder bolts on. How BMT bolt patterns differ by machine builder →
Mongtec supplies holders for this pattern. Send the turret drawing or the machine serial number and we confirm the fit before quoting — request a quotation →
All 228 article numbers with full specification · How to choose a driven tool holder · PSC / ISO 26623 tooling
Machine builders regularly ship the same model with different turrets — station count, model suffix and the number of keys all change the mounting. The Hardinge Conquest H51 is BMT55 in the 12-station build and BMT45 in the 16-station build; the Okuma GENOS L300 M is VDI40, while the L300 MW/MYW uses a 65×73 mm bolt pattern. This is the single most common reason a driven tool holder arrives and will not bolt on. BMT bolt pattern reference — 38 patterns by machine builder →
Send your model and a photo of the turret face — we confirm the fit before quoting →
This machine is documented by its turret bolt pattern (60×60 mm), not by a nominal BMT size — the bolt pattern is what decides whether a holder mounts. Mongtec publishes the driven tool types below and builds to machine-specific patterns; the article number is confirmed against the actual turret drawing at RFQ.
BMT bolt pattern reference (38 patterns) · All driven tool types and turret interfaces