Speeder holders step the turret drive up so small-diameter cutters reach their correct surface speed on a lathe whose driven-tool spindle cannot turn fast enough. Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, builds them to mount on Mazak turrets, published for BMT55.
Developed specifically for the high-speed machining requirements of Mazak multitasking centers. Designed to break through the RPM limits of traditional turrets, these toolholders significantly boost output RPM via an internal high-precision speed-increasing mechanism. They perfectly address insufficient cutting speeds in small-diameter drilling, micro-machining, and high-speed precision milling—helping customers achieve high-efficiency and high-precision process integration on their Mazak machines.
55 Mazak models. Where the turret interface is published it is shown; where it is blank the interface depends on the turret actually fitted and is confirmed at enquiry.
| Machine model | Turret interface (where published) | Turret |
|---|---|---|
| QRX-50 MY/MSY | — | — |
| QT/QTS 100 M/MY/MS/MSY | — | — |
| QT/QTS 200 | — | — |
| QT 250 (US specification) | — | — |
| QT/QTS 200, 250 M/MY/MS/MSY | — | — |
| QT 200, 250 M/MY/MS/MSY (16D) | — | — |
| QT/QTS 250, QTE 300 | — | — |
| QT/QTS 300, 350 | — | — |
| QT/QTS 300-450 M/MY/MS/MSY (12D/16D) | — | — |
| QTC/QTE/QTU 100-350 M/MY/MS/MSY | — | — |
| QT/QTN 100 M/MY (VDI) | — | — |
| QT/QTN 100 MS/MSY (VDI) | — | — |
| QT/QTN 200, 250 M/MY (VDI) | — | — |
| QT/QTN 200, 250 MS/MSY (VDI) | — | — |
| QT/QTN 300, 350, 400, 450 M/MY (VDI) | — | — |
| QT/QTN 300, 350, 400, 450 MSY (VDI) | — | — |
| QT/QTN 200, 250 M/MY (16D, VDI) | — | — |
| QT/QTN 200, 250 MS/MSY (16D, VDI) | — | — |
| QTN 200, 250, 300, 350 | — | — |
| QT-Ez 8, 10, 12 M/MY/MSY | — | — |
| QT-Ez 8, 10, 12 M/MY/MSY (BMT55) | BMT55 | — |
| QT Primos 150 S | — | — |
| Cybertech Turn 4500 M/MT | — | — |
| Dual Turn 20 | — | — |
| HQR 100, 150 MSY | — | — |
| HQR 200, 250 MSY/NEO | — | — |
| HQR 200, 250 MSY/NEO (16D) | — | — |
| HQR 450 M | — | — |
| Integrex e-1060 | — | — |
| Integrex e-Ramtec V/8 /10 /12 | — | — |
| Integrex i-100, 200H ST (12D) | — | — |
| Integrex i-100, 200H ST (VDI) | — | — |
| Integrex i-250, 350, 450H ST (12D) | — | — |
| Integrex i-250, 350, 450H ST (VDI) | — | — |
| IVS-200, 300 M | — | — |
| Megaturn Smart 500, 600 | — | — |
| Megaturn Smart 500, 600 M | — | — |
| Megaturn (Nexus) 900 M | — | — |
| Megaturn (Nexus) 1600 M | — | — |
| Multiplex 6100 | — | — |
| Multiplex 6200, 6200Y, 6250, W-200, W-200Y (12D) | — | — |
| Multiplex 6200Y (16D) | — | — |
| Multiplex W-200, W-200Y (16D) | — | — |
| Multiplex 6300, 6300Y, W-300, W-300Y | — | — |
| Super Quick Turn 100 M/MY | — | — |
| Super Quick Turn 100 MS/MSY | — | — |
| Super Quick Turn 200, 250 M/MY | — | — |
| Super Quick Turn 200, 250 MS/MSY | — | — |
| Super Quick Turn 200, 250 M/MY (16D) | — | — |
| Super Quick Turn 200, 250 MS/MSY (16D) | — | — |
| Super Quick Turn 300, 350, 400, 450 M/MY | — | — |
| Super Quick Turn 200, 250, 300 | — | — |
| Super Quadrex 200, 250 M | — | — |
| Super Quadrex 200, 250 M (16D) | — | — |
| Slant Turn (Nexus) 500, 550, 600 M | — | — |
All machine builders for speeder driven tools →
The machine model alone does not decide the holder. The same model can leave the factory with different turrets — station count, model suffix and key arrangement all change the mounting. Tell us the machine, the turret and the operation and we confirm the mounting before quoting.
Already using another brand? Send the drawing or the article number of the holder you run today and Mongtec will convert it to an equivalent Mongtec holder — same mounting, same reach, same output.