Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, designs and engineers driven tool holders and static tooling for the Samsung Machine Tools SL 20 MC on the open machine-side BMT and VDI (DIN 69880) standards. This model is published with a BMT65 turret; Mongtec engineering confirms it against the actual turret drawing at RFQ, and every driven unit ships with an individual inspection report.
| Machine brand | Samsung Machine Tools |
|---|---|
| Model | SL 20 MC |
| Turret interface | BMT65 (published in a machine-specific tooling catalogue by a driven tool holder manufacturer; confirmed against the actual turret drawing at RFQ) |
| Driven tool holders | Axial, radial, adjustable-angle, twin-output, high-speed and geared-down units |
| Static tooling | Turning, boring bar, facing, cut-off and blank holders |
| Inspection | Individual inspection report with every driven unit |
| Origin | Taiwanese brand, designed and engineered in Taichung, Taiwan |
Machine builders routinely offer the same model with more than one turret — station count, model suffix and key count all change the mounting. Hardinge Conquest H51 is BMT55 in the 12-station build and BMT45 in the 16-station build; Okuma GENOS L300 M is VDI40 while L300 MW/MYW uses a 65×73 bolt pattern. It is the most common reason a driven tool holder arrives and will not bolt on. Reference table: 38 BMT turret bolt patterns by machine builder →
Send the machine model and turret photo — we confirm the fit before quoting →
Machine-specific tooling catalogues publish this model with a BMT65 turret. Machine builders do sometimes ship the same model with more than one turret, so Mongtec confirms the interface against the actual turret drawing before quoting. That check is free and takes one email.
The full dimensioned drawing and the confirmed article number are supplied by email once an enquiry is open, so they match your actual machine and turret configuration.
Yes. Special angles, extended reach, high-pressure internal coolant and non-standard mountings are built to order. Describe the operation and the machine.
All Samsung Machine Tools models · Driven tool holder types and turret interfaces · Published article numbers · Static turret tooling · Selection guide