Double 90° holders carry two right-angle outputs from one turret station, so two cross features are cut without indexing the turret between them. Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, builds them to mount on EMCO turrets, published for BMT45, BMT55, BMT65, BMT85, VDI25, VDI30, VDI40, VDI50, VDI60.
Engineered specifically for EMCO multitasking turning-milling centers, our Double 90° Degree Driven Tools combine side-machining capability with a dual-tool position design to achieve high-efficiency, multi-process integration.
Through its dual-tool configuration and precision 90° transmission structure, multiple lateral milling and drilling operations can be completed with a single toolholder. This significantly reduces tool-change intervals and secondary setup requirements, boosting overall cycle times and capacity utilization on your EMCO equipment.
44 EMCO models. Where the turret interface is published it is shown; where it is blank the interface depends on the turret actually fitted and is confirmed at enquiry.
| Machine model | Turret interface (where published) | Turret |
|---|---|---|
| EMCOMAT E300 | — | — |
| EMCOTURN E25 | — | — |
| EMCOTURN E45 M/MY, S45 | — | — |
| EMCOTURN E45 SM/SMY | — | — |
| EMCOTURN E65 M/MY, S65 (VDI30) | VDI30 | — |
| EMCOTURN E65 SM/SMY (VDI30) | VDI30 | — |
| EMCOTURN E65 M/MY (VDI40) | VDI40 | — |
| EMCOTURN E65 SM/SMY (VDI40) | VDI40 | — |
| EMCOTURN 332MC | — | — |
| EMCOTURN 345-II (DIN5480) | — | — |
| EMCOTURN 700 MC | — | — |
| EMCOTURN 800 MC | — | — |
| EMCOTURN 900 MC | — | — |
| Concept Turn 155/250/260 | — | — |
| Concept Turn 450/460 | — | — |
| Hyperturn 45 (VDI25) | VDI25 | — |
| Hyperturn 45/50/65 (BMT45) | BMT45 | — |
| Hyperturn 645/665 (VDI30) | VDI30 | — |
| Hyperturn 65 (VDI30) | VDI30 | — |
| Hyperturn 65/645/665 (VDI40) | VDI40 | — |
| Hyperturn 65 (BMT55) | BMT55 | — |
| Hyperturn 690 (VDI40) | VDI40 | — |
| Hyperturn 95/110 | — | — |
| Hyperturn 95/110 SMB/SM2Y (BMT65) | BMT65 | — |
| Hyperturn 100 Powermill (BMT65) | BMT65 | — |
| Maxxturn 25 | — | — |
| Maxxturn 45 M | — | — |
| Maxxturn 45 SM/SMY/G2 | — | — |
| Maxxturn 65 M/MY/SM/SMY (BMT55) | BMT55 | — |
| Maxxturn 65 M (VDI30) | VDI30 | — |
| Maxxturn 65 SM (VDI30) | VDI30 | — |
| Maxxturn 65 SMY (VDI30) | VDI30 | — |
| Maxxturn 65 SMY (BMT45) | BMT45 | — |
| Maxxturn 65 (VDI40) | VDI40 | — |
| Maxxturn 95 (VDI40) | VDI40 | — |
| Maxxturn 95 (BMT55) | BMT55 | — |
| Maxxturn 110 (VDI50) | VDI50 | — |
| Maxxturn 110 (BMT65) | BMT65 | — |
| Maxxturn 200 (BMT85) | BMT85 | — |
| Maxxturn 200 (VDI60) | VDI60 | — |
| UNIVERSALTURN 50 M/MY | — | — |
| UNIVERSALTURN 50 SMY | — | — |
| Vertical VT 160 | — | — |
| Vertical VT 250/260/400 | — | — |
All machine builders for double 90° driven tools →
The machine model alone does not decide the holder. The same model can leave the factory with different turrets — station count, model suffix and key arrangement all change the mounting. Tell us the machine, the turret and the operation and we confirm the mounting before quoting.
Already using another brand? Send the drawing or the article number of the holder you run today and Mongtec will convert it to an equivalent Mongtec holder — same mounting, same reach, same output.