Double 90° holders carry two right-angle outputs from one turret station, so two cross features are cut without indexing the turret between them. Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, builds them to mount on Miyano turrets.
Developed specifically for the lateral machining requirements of Miyano multitasking centers. Combining 90° lateral transmission with a double-output spindle design to maximize space utilization and machining efficiency. This toolholder provides dual-direction tool output in a single station, reducing tool-change frequency and optimizing cycle times—helping customers achieve high-efficiency process integration on their Miyano machines.
8 Miyano models. Where the turret interface is published it is shown; where it is blank the interface depends on the turret actually fitted and is confirmed at enquiry.
| Machine model | Turret interface (where published) | Turret |
|---|---|---|
| ABX-51,64 SY/TH2/TH3 | — | — |
| ABX-51,64,80 SYY/THY | — | — |
| ANX-42SYY, BNA-42CY/SY | — | — |
| BNA-42C/S/MSY/DHY/GTY, BNC-42C | — | — |
| BND-51 C/S/SY | — | — |
| BND/BNE-51 S (Bevel Gear Drive) | — | — |
| BNE-34,51 S/SY/MSY, BNE-51,65 MYY | — | — |
| BNJ-34,42,51 S/SY, BNX-42,51 SY | — | — |
All machine builders for double 90° driven tools →
The machine model alone does not decide the holder. The same model can leave the factory with different turrets — station count, model suffix and key arrangement all change the mounting. Tell us the machine, the turret and the operation and we confirm the mounting before quoting.
Already using another brand? Send the drawing or the article number of the holder you run today and Mongtec will convert it to an equivalent Mongtec holder — same mounting, same reach, same output.