Double 90° single-side twin-spindle holders place two radial spindles on the same side of one station — two cross holes at a fixed pitch in one plunge. Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, builds them to mount on Gildemeister turrets, published for VDI25, VDI30, VDI40.
Engineered specifically for the advanced machining requirements of Gildemeister multitasking turning-milling centers, this toolholder combines a 90° lateral machining structure with a twin-spindle design and Y-axis offset capability to achieve highly integrated multitasking applications.
Through its multi-axis integrated design, it enables lateral milling, multi-hole pattern machining, and offset machining in a single setup. This effectively reduces tool-change frequency and secondary positioning errors, enhancing overall machining precision and production line efficiency on your Gildemeister equipment.
35 Gildemeister models. Where the turret interface is published it is shown; where it is blank the interface depends on the turret actually fitted and is confirmed at enquiry.
| Machine model | Turret interface (where published) | Turret |
|---|---|---|
| CTX 210 V3 | — | — |
| CTX 310 ECOLINE (DIN5480) | — | — |
| CTX 310 eco (DIN5482) | — | — |
| CTX 310 V3 (DIN5480) | — | — |
| CTX 310 V4 | — | — |
| CTX 310 V6 | — | — |
| CTX 320 linear V3 | — | — |
| CTX 320 linear V4 | — | — |
| CTX 320 linear V5 | — | — |
| CTX 320 linear V6 | — | — |
| CTX 400 E face tooling turret | — | — |
| CTX 400 E radial tooling turret | — | — |
| CTX 410 V3 | — | — |
| CTX 410 V4 | — | — |
| CTX 410 V6 | — | — |
| CTX 420 linear face tooling turret | — | — |
| CTX 420 linear radial tooling turret | — | — |
| CTX 450 / 510 ECOLINE (DIN5480) | — | — |
| CTX 510 (DIN5480) | — | — |
| CTX 510 eco (DIN5482) | — | — |
| CTX 520 linear | — | — |
| CTX 520 linear with Y-axis | — | — |
| CTX 620 linear | — | — |
| CTX 650 ECOLINE | — | — |
| GMX 250 linear | — | — |
| GMX 300 / 400 linear | — | — |
| GMX 500 linear | — | — |
| Sprint 50 VDI25 | VDI25 | — |
| Sprint 65 linear VDI30 | VDI30 | — |
| Sprint 65 linear VDI40 | VDI40 | — |
| Twin 32 / 42 / 65 VDI25 | VDI25 | — |
| Twin 42 / 65 Frame size 2 VDI 30 | VDI30 | — |
| Twin 42 / 65 Frame size 2 VDI 40 | VDI40 | — |
| Twin 102 VDI30 | VDI30 | — |
| Twin 102 VDI40 | VDI40 | — |
All machine builders for double 90° single-side twin-spindle driven tools →
The machine model alone does not decide the holder. The same model can leave the factory with different turrets — station count, model suffix and key arrangement all change the mounting. Tell us the machine, the turret and the operation and we confirm the mounting before quoting.
Already using another brand? Send the drawing or the article number of the holder you run today and Mongtec will convert it to an equivalent Mongtec holder — same mounting, same reach, same output.