Double 90° holders carry two right-angle outputs from one turret station, so two cross features are cut without indexing the turret between them. Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, builds them to mount on Gildemeister turrets, published for VDI25, VDI30, VDI40.
Engineered specifically for Gildemeister multitasking turning-milling centers, our Double 90° Degree Driven Tools combine side-machining capability with a dual-tool position design to achieve high-efficiency, multi-process integration.
Through its dual-tool configuration and precision 90° transmission structure, multiple lateral milling and drilling operations can be completed with a single toolholder. This significantly reduces tool-change intervals and secondary setup requirements, boosting overall cycle times and capacity utilization on your Gildemeister equipment.
35 Gildemeister models. Where the turret interface is published it is shown; where it is blank the interface depends on the turret actually fitted and is confirmed at enquiry.
| Machine model | Turret interface (where published) | Turret |
|---|---|---|
| CTX 210 V3 | — | — |
| CTX 310 ECOLINE (DIN5480) | — | — |
| CTX 310 eco (DIN5482) | — | — |
| CTX 310 V3 (DIN5480) | — | — |
| CTX 310 V4 | — | — |
| CTX 310 V6 | — | — |
| CTX 320 linear V3 | — | — |
| CTX 320 linear V4 | — | — |
| CTX 320 linear V5 | — | — |
| CTX 320 linear V6 | — | — |
| CTX 400 E face tooling turret | — | — |
| CTX 400 E radial tooling turret | — | — |
| CTX 410 V3 | — | — |
| CTX 410 V4 | — | — |
| CTX 410 V6 | — | — |
| CTX 420 linear face tooling turret | — | — |
| CTX 420 linear radial tooling turret | — | — |
| CTX 450 / 510 ECOLINE (DIN5480) | — | — |
| CTX 510 (DIN5480) | — | — |
| CTX 510 eco (DIN5482) | — | — |
| CTX 520 linear | — | — |
| CTX 520 linear with Y-axis | — | — |
| CTX 620 linear | — | — |
| CTX 650 ECOLINE | — | — |
| GMX 250 linear | — | — |
| GMX 300 / 400 linear | — | — |
| GMX 500 linear | — | — |
| Sprint 50 VDI25 | VDI25 | — |
| Sprint 65 linear VDI30 | VDI30 | — |
| Sprint 65 linear VDI40 | VDI40 | — |
| Twin 32 / 42 / 65 VDI25 | VDI25 | — |
| Twin 42 / 65 Frame size 2 VDI 30 | VDI30 | — |
| Twin 42 / 65 Frame size 2 VDI 40 | VDI40 | — |
| Twin 102 VDI30 | VDI30 | — |
| Twin 102 VDI40 | VDI40 | — |
All machine builders for double 90° driven tools →
The machine model alone does not decide the holder. The same model can leave the factory with different turrets — station count, model suffix and key arrangement all change the mounting. Tell us the machine, the turret and the operation and we confirm the mounting before quoting.
Already using another brand? Send the drawing or the article number of the holder you run today and Mongtec will convert it to an equivalent Mongtec holder — same mounting, same reach, same output.