Universal holders let the output be set at any angle between 0° and 90°, so angled holes and angled faces are cut without a dedicated holder for each angle. Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, supplies them to mount on Gildemeister turrets, published for VDI25, VDI30, VDI40.
Engineered specifically for Gildemeister multitasking turning-milling centers, our Universal Driven Tools feature multi-angle adjustment capabilities to meet the most demanding requirements for complex angular machining.
Through its adjustable-angle design, the machine can flexibly perform angular hole drilling, variable-angle milling, and special pattern machining. This effectively expands the machining range while reducing the need for secondary setups and reliance on specialized fixtures on your Gildemeister equipment.
35 Gildemeister models. Where the turret interface is published it is shown; where it is blank the interface depends on the turret actually fitted and is confirmed at enquiry.
| Machine model | Turret interface (where published) | Turret |
|---|---|---|
| CTX 210 V3 | — | — |
| CTX 310 ECOLINE (DIN5480) | — | — |
| CTX 310 eco (DIN5482) | — | — |
| CTX 310 V3 (DIN5480) | — | — |
| CTX 310 V4 | — | — |
| CTX 310 V6 | — | — |
| CTX 320 linear V3 | — | — |
| CTX 320 linear V4 | — | — |
| CTX 320 linear V5 | — | — |
| CTX 320 linear V6 | — | — |
| CTX 400 E face tooling turret | — | — |
| CTX 400 E radial tooling turret | — | — |
| CTX 410 V3 | — | — |
| CTX 410 V4 | — | — |
| CTX 410 V6 | — | — |
| CTX 420 linear face tooling turret | — | — |
| CTX 420 linear radial tooling turret | — | — |
| CTX 450 / 510 ECOLINE (DIN5480) | — | — |
| CTX 510 (DIN5480) | — | — |
| CTX 510 eco (DIN5482) | — | — |
| CTX 520 linear | — | — |
| CTX 520 linear with Y-axis | — | — |
| CTX 620 linear | — | — |
| CTX 650 ECOLINE | — | — |
| GMX 250 linear | — | — |
| GMX 300 / 400 linear | — | — |
| GMX 500 linear | — | — |
| Sprint 50 VDI25 | VDI25 | — |
| Sprint 65 linear VDI30 | VDI30 | — |
| Sprint 65 linear VDI40 | VDI40 | — |
| Twin 32 / 42 / 65 VDI25 | VDI25 | — |
| Twin 42 / 65 Frame size 2 VDI 30 | VDI30 | — |
| Twin 42 / 65 Frame size 2 VDI 40 | VDI40 | — |
| Twin 102 VDI30 | VDI30 | — |
| Twin 102 VDI40 | VDI40 | — |
All machine builders for universal driven tools →
The machine model alone does not decide the holder. The same model can leave the factory with different turrets — station count, model suffix and key arrangement all change the mounting. Tell us the machine, the turret and the operation and we confirm the mounting before quoting.
Already using another brand? Send the drawing or the article number of the holder you run today and Mongtec will convert it to an equivalent Mongtec holder — same mounting, same reach, same output.
Mongtec publishes universal driven tool holders for 35 Gildemeister machine models, on turret interfaces VDI25, VDI30, VDI40. On these machines the holder is used for switching between axial and radial work from one station, on jobs where turret stations are scarce. Article numbers are matched to the machine at RFQ — we confirm the turret interface from the builder’s drawing rather than assume it from the model name.
Gildemeister machine not on this list? Send the model and we confirm the interface →