Double 90° holders carry two right-angle outputs from one turret station, so two cross features are cut without indexing the turret between them. Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, builds them to mount on HURCO turrets, published for BMT65, VDI30, VDI40, VDI50.
Engineered specifically for HURCO multitasking turning-milling centers, our Double 90° Degree Driven Tools combine side-machining capability with a dual-tool position design to achieve high-efficiency, multi-process integration.
Through its dual-tool configuration and precision 90° transmission structure, multiple lateral milling and drilling operations can be completed with a single toolholder. This significantly reduces tool-change intervals and secondary setup requirements, boosting overall cycle times and capacity utilization.
8 HURCO models. Where the turret interface is published it is shown; where it is blank the interface depends on the turret actually fitted and is confirmed at enquiry.
| Machine model | Turret interface (where published) | Turret |
|---|---|---|
| TMM 8 (VDI30 DIN5480) | VDI30 | — |
| TMM 8i (VDI30 DIN1809) | VDI30 | — |
| TMM 10 (VDI40 DIN5480) | VDI40 | — |
| TMM 10i (VDI40 DIN1809) | VDI40 | — |
| TMM 12i (VDI50 DIN1809) | VDI50 | — |
| TMX 8, TMX10 MY/MYS (VDI40 DIN1809) | VDI40 | — |
| TMX 8, TMX10 MY/MYS (VDI40 DIN5480) | VDI40 | — |
| TMX 8, TMX10 MY/MYS (BMT65) | BMT65 | — |
All machine builders for double 90° driven tools →
The machine model alone does not decide the holder. The same model can leave the factory with different turrets — station count, model suffix and key arrangement all change the mounting. Tell us the machine, the turret and the operation and we confirm the mounting before quoting.
Already using another brand? Send the drawing or the article number of the holder you run today and Mongtec will convert it to an equivalent Mongtec holder — same mounting, same reach, same output.