Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, supplies driven tool holders and static tooling for the Hyundai WIA LM1600 / 1800 TTSY on the open machine-side BMT and VDI (DIN 69880) standards. The turret interface for this model is confirmed per machine configuration by Mongtec engineering at RFQ.
| Machine brand | Hyundai WIA |
|---|---|
| Model | LM1600 / 1800 TTSY |
| Turret interface | BMT55 (stated in the machine-specific tooling catalogue published by a driven tool holder manufacturer; confirmed against the actual turret drawing at RFQ) |
| Driven tool line speed | 6,000–12,000 rpm standard (up to 32,000 rpm with speed increaser) |
| Max torque | Up to 160 Nm (line capability; unit rating confirmed at RFQ) |
| Coolant | Internal / external, up to 100 bar |
| Runout | ≤0.003 mm (0° axial driven line) |
Same model, different turret: station count, model suffix and build year change the turret interface. Mongtec confirms the interface from the machine model and a turret photo before quoting.
TOOL HOLDER SELECTION GUIDE Ver 2026.08 (PDF, 2.6 MB)
What the PDF guide says: The TOOL HOLDER SELECTION GUIDE lists Hyundai WIA under BMT45, BMT55, BMT65 and BMT75, but does not name the Hyundai WIA LM1600 / 1800 TTSY. The BMT55 shown on this page is a cross-reference — send a photo of the turret face and Mongtec confirms the interface free of charge.
| Article no. | Tool clamping | What it does on the machine |
|---|---|---|
| M12084 | 25 | 180° reversible — Facing & face grooving |
| M74384 | 25 | 180° reversible — Facing & face grooving |
| M91084 | Ø40 | 180° reversible — Boring, U-drilling & ID grooving |
| M04485 | Ø32 | 180° reversible — Boring, U-drilling & ID grooving |
| M23084 | Ø40 | 180° reversible — Boring, U-drilling & ID grooving |
| M14484 | Ø32 | 180° reversible — Boring, U-drilling & ID grooving |
| M19684 | Ø40 | 180° reversible — Boring, U-drilling & ID grooving |
| M02084 | Ø40 | 180° reversible — Boring, U-drilling & ID grooving |
| M82384 | Ø40 | 180° reversible — Boring, U-drilling & ID grooving |
| M39484 | Ø20 | 180° reversible — Boring, U-drilling & ID grooving |
| M33484 | 20 | 180° reversible — OD turning, threading, parting & grooving |
| M81484 | 25 | 180° reversible — OD turning, threading, parting & grooving |
| M03084 | 25 | 180° reversible — OD turning, threading, parting & grooving |
| M22084 | 25 | OD turning, threading, parting & grooving |
| M13084 | 25 | OD turning, threading, parting & grooving |
| M45084 | SH32 WIDTH 32 | 180° reversible — OD turning, threading, parting & grooving |
| M6317 | ER25 1-16 | Axial (0°) drilling & milling |
| M6117 | ER25 1-16 | Axial (0°) drilling & milling |
| M4117 | ER32 2-20 | Axial (0°) drilling & milling |
| M3317 | ER25 1-16 | 180° reversible — Radial (90°) face drilling & milling |
| M2317 | ER32 2-20 | 180° reversible — Radial (90°) face drilling & milling |
| M4317 | ER25 1-16 | 180° reversible — Radial (90°) face drilling & milling |
| M5317 | ER32 2-20 | 180° reversible — Radial (90°) face drilling & milling |
| M8017 | ER25 1-16 | 180° reversible — Radial (90°) face drilling & milling |
| M9217 | ER32 2-20 | 180° reversible — Radial (90°) face drilling & milling |
| M0317 | ER25 1-16 | 180° reversible — Radial (90°) face drilling & milling |
| M1317 | ER32 2-20 | 180° reversible — Radial (90°) face drilling & milling |
Article numbers shown as links have a specification page with the catalogue drawing. The rest are published in the Mongtec selection guide; Mongtec confirms the final article number against your turret drawing at RFQ.
Article numbers with a specification page on this site: M0317, M0717, M0817, M1117, M1317, M1817, M2317, M3317, M3417, M4117, M5317, M6117, M6317, M6617, M7317, M7517
Mongtec also supplies BMT40, BMT60, BMT68 and BMT80 holders and builder-specific interfaces (Mazak, Nakamura-Tome, Haas BOT, Okuma BOT, Muratec BOT) — the 228 article numbers published here are a subset of the range. Mongtec tooling is exported to five continents and supplied to machine-tool builders. Lead time is confirmed per item and quantity at quotation.
Request a quote for this machine
Builds sold under the Hyundai WIA LM1600 / 1800 TTSY name do not all carry the same turret, and the turret decides which Mongtec tool holder fits.
Check the turret face against the interface shown on this page:
| Interface | What to check on the turret |
|---|---|
| BMT55 | Centre bore ø55 mm, bolt spacing 64×64 mm, 4 × M10 mounting screws, 15 mm key slot. |
Count the turret stations, photograph the turret face and the machine serial plate, and email them with the model name. The interface for your machine is confirmed in Mongtec's formal quotation.
Mongtec supplies BMT and VDI (DIN 69880) driven tool holders and static tooling compatible with the Hyundai WIA turret platform. Interface: BMT55. The exact configuration is confirmed by Mongtec engineering at RFQ.
Yes. BMT and VDI are open machine-side standards, so switching supplier does not require any turret modification. Mongtec also publishes cross-reference pages for WTO, Heimatec, EWS, Eppinger, BIG and other brands.
Lead time is quoted per order and ships from Taichung, Taiwan.
A selection of Mongtec BMT55 driven tool holder article numbers. This is a starting point, not a confirmed fit — the exact turret drawing is verified at RFQ. See all 19 BMT55 article numbers →
| Article no. | Orientation | Collet | Max speed | Torque |
|---|---|---|---|---|
| M1817 | Axial | ER25 | 8,000 rpm | 40 Nm |
| M4117 | Axial | ER32 | 6,000 rpm | 70 Nm |
| M6117 | Axial | ER25 | 6,000 rpm | 40 Nm |
| M0317 | Radial | ER25 | 6,000 rpm | 40 Nm |
| M0717 | Radial | ER32 | 6,000 rpm | 70 Nm |
| M1117 | Radial | ER25 | 6,000 rpm | 40 Nm |
Static BMT55 turret tooling for this machine →
All 228 article numbers with full specification · How to choose a driven tool holder · PSC / ISO 26623 tooling
Machine builders regularly ship the same model with different turrets — station count, model suffix and the number of keys all change the mounting. The Hardinge Conquest H51 is BMT55 in the 12-station build and BMT45 in the 16-station build; the Okuma GENOS L300 M is VDI40, while the L300 MW/MYW uses a 65×73 mm bolt pattern. This is the single most common reason a driven tool holder arrives and will not bolt on. BMT bolt pattern reference — 38 patterns by machine builder →
Send your model and a photo of the turret face — we confirm the fit before quoting →
Whether a holder mounts is decided by the turret bolt pattern and the drive coupling, not by the machine name alone. The types below are published by Mongtec for this interface; the exact article number is confirmed against the actual turret drawing at RFQ.
BMT55 article numbers · BMT bolt pattern reference (38 patterns) · All driven tool types and turret interfaces