Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, supplies driven tool holders and static tooling for the Hyundai WIA LV450 RM/LM on the open machine-side BMT and VDI (DIN 69880) standards. The turret interface for this model is confirmed per machine configuration by Mongtec engineering at RFQ, and every driven unit ships with an individual inspection report.
| Machine brand | Hyundai WIA |
|---|---|
| Model | LV450 RM/LM |
| Turret interface | BMT65 (stated in the machine-specific tooling catalogue published by a driven tool holder manufacturer; confirmed against the actual turret drawing at RFQ) |
| Driven tool line speed | 6,000–12,000 rpm standard (up to 32,000 rpm with speed increaser) |
| Max torque | Up to 160 Nm (line capability; unit rating confirmed at RFQ) |
| Coolant | Internal / external, up to 100 bar |
| Runout | ≤0.003 mm (0° axial driven line) |
| Quality assurance | Each driven unit ships with an individual inspection report |
Same model, different turret: station count, model suffix and build year change the turret interface. Mongtec confirms the interface from the machine model and a turret photo before quoting.
TOOL HOLDER SELECTION GUIDE Ver 2026.08 (PDF, 2.6 MB)
| Article no. | Tool clamping |
|---|---|
| M44484 | 25 |
| M62084 | 25 |
| M96084 | 25 |
| M21484 | 25 |
| M31484 | 25 |
| M52084 | 25 |
| M51384 | Ø40 |
| M80584 | Ø50 |
| M33884 | Ø40 |
| M33084 | Ø50 |
| M72084 | Ø40 |
| M03884 | Ø40 |
| M31384 | Ø25 |
| M60684 | Ø25 |
| M42084 | 25 |
| M37084 | 25 |
| M20584 | 25 |
| M62884 | 25 |
| M43084 | SH32 WIDTH 32 |
| M4027 | ER32 2-20 |
| M3227 | ER32 2-20 |
| M7127 | ER32 2-20 |
| M5127 | ER32 2-20 |
| M0227 | ER32 2-20 |
| M6227 | ER32 2-20 |
Article numbers with a specification page on this site: M0227, M1227, M2427, M2527, M3227, M3427, M4027, M5127, M6227, M7127, M7427, M8427, M9327
Mongtec also supplies BMT40, BMT60, BMT68 and BMT80 holders and builder-specific interfaces (Mazak, Nakamura-Tome, Haas BOT, Okuma BOT, Muratec BOT) — the 228 article numbers published here are a subset of the range. Mongtec tooling is exported to five continents and supplied to machine-tool builders. Lead time is confirmed per item and quantity at quotation.
Request a quote for this machine
Mongtec supplies BMT and VDI (DIN 69880) driven tool holders and static tooling compatible with the Hyundai WIA turret platform. Interface: BMT65. The exact configuration is confirmed by Mongtec engineering at RFQ.
Yes. BMT and VDI are open machine-side standards, so switching supplier does not require any turret modification. Mongtec also publishes cross-reference pages for WTO, Heimatec, EWS, Eppinger, BIG and other brands.
Lead time is quoted per order and ships from Taichung, Taiwan. Every Mongtec driven tool holder is inspected before shipment (runout, torque, balancing) and ships with an individual inspection report.
A selection of Mongtec BMT65 driven tool holder article numbers. This is a starting point, not a confirmed fit — the exact turret drawing is verified at RFQ. See all 11 BMT65 article numbers →
| Article no. | Orientation | Collet | Max speed | Torque |
|---|---|---|---|---|
| M3227 | Axial | ER32 | 6,000 rpm | 70 Nm |
| M3427 | Axial | ER40 | 6,000 rpm | 100 Nm |
| M4027 | Axial | ER32 | 5,300 rpm | 70 Nm |
| M0227 | Radial | ER32 | 6,000 rpm | 70 Nm |
| M1227 | Radial | ER40 | 5,300 rpm | 100 Nm |
| M2527 | Radial | ER32 | 6,000 rpm | 70 Nm |
Static BMT65 turret tooling for this machine →
All 228 article numbers with full specification · How to choose a driven tool holder · PSC / ISO 26623 tooling
Machine builders regularly ship the same model with different turrets — station count, model suffix and the number of keys all change the mounting. The Hardinge Conquest H51 is BMT55 in the 12-station build and BMT45 in the 16-station build; the Okuma GENOS L300 M is VDI40, while the L300 MW/MYW uses a 65×73 mm bolt pattern. This is the single most common reason a driven tool holder arrives and will not bolt on. BMT bolt pattern reference — 38 patterns by machine builder →
Send your model and a photo of the turret face — we confirm the fit before quoting →
Whether a holder mounts is decided by the turret bolt pattern and the drive coupling, not by the machine name alone. The types below are published by Mongtec for this interface; the exact article number is confirmed against the actual turret drawing at RFQ.
BMT65 article numbers · BMT bolt pattern reference (38 patterns) · All driven tool types and turret interfaces