The Mazak QTE 200–300 M/MS/MY/MSY uses a BMT turret interface. Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, supplies driven tool holders and static tooling on the open machine-side BMT and VDI (DIN 69880) standards used by this machine class. The exact Mongtec model for your machine configuration is confirmed by Mongtec engineering at RFQ.
| Machine brand | Mazak |
|---|---|
| Model | QTE 200–300 M/MS/MY/MSY |
| Turret interface | BMT |
| Driven tool line speed | 6,000–12,000 rpm standard (up to 32,000 rpm with speed increaser) |
| Max torque | Up to 160 Nm (line capability; unit rating confirmed at RFQ) |
| Coolant | Internal / external, up to 100 bar |
| Runout | ≤0.003 mm published for Mazak-compatible 0° driven tool line; other families confirmed at RFQ |
Mazak turret rule: 2-axis turning models (no live tooling) use a BOT bolt-on turret and take Mongtec bolt-on static holders. Live-tool models (M / MY / MS / MSY) use the BMT68 driven-tool turret; larger QT 300/350 12-station builds use BMT80. Mazak's VDI40 turret is a Mazak-specific clamping system — a standard VDI40 holder does not fit, but Mongtec supplies VDI40 holders to the Mazak interface. The same model can be built with a different turret, so this is a general rule, not a confirmed interface for your machine — email the machine model and a photo of the turret face; the interface is confirmed in Mongtec's formal quotation.
TOOL HOLDER SELECTION GUIDE Ver 2026.08 (PDF, 2.6 MB)
Models listed in this catalogue section: QTC/QTU 100-350 M,MY,MS,MSY / QT,QTS 100M,MY,MS,MSY / MZ 68 B,C / QT 200, 250 M,MY,MS,MSY,16D / QT,QTS 200, 250 M,MY,MS,MSY / QT-Ez 8-12 M,MY,MSY
| Article no. | Tool clamping | What it does on the machine |
|---|---|---|
| M07184 | 25 | Facing & face grooving |
| M33684 | 25.4 | Facing & face grooving |
| M02584 | Ø25.4 | Boring, U-drilling & ID grooving |
| M43684 | Ø25.4 | Boring, U-drilling & ID grooving |
| M27185 | Ø21 | Boring, U-drilling & ID grooving |
| M17185 | Ø31.75 | Boring, U-drilling & ID grooving |
| M96184 | Ø40 | Boring, U-drilling & ID grooving |
| M84284 | Ø38.1 | Boring, U-drilling & ID grooving |
| M58085 | 20 | OD turning, threading, parting & grooving |
| M07185 | 19.05 | OD turning, threading, parting & grooving |
| M47084 | 25 | OD turning, threading, parting & grooving |
| M23684 | 25.4 | OD turning, threading, parting & grooving |
| M76084 | 25 | OD turning, threading, parting & grooving |
| M13684 | 25.4 | OD turning, threading, parting & grooving |
| M30385 | SH32 | OD turning, threading, parting & grooving |
| M1018 | ER32 | Axial (0°) drilling & milling |
| M2018 | ER32 | Radial (90°) face drilling & milling |
Article numbers shown as links have a specification page with the catalogue drawing. The rest are published in the Mongtec selection guide; Mongtec confirms the final article number against your turret drawing at RFQ.
Mongtec also supplies BMT40, BMT60, BMT68 and BMT80 holders and builder-specific interfaces (Mazak, Nakamura-Tome, Haas BOT, Okuma BOT, Muratec BOT) — the 228 article numbers published here are a subset of the range. Mongtec tooling is exported to five continents and supplied to machine-tool builders. Lead time is confirmed per item and quantity at quotation.
Request a quote for this machine
Builds sold under the Mazak QTE 200–300 M/MS/MY/MSY name do not all carry the same turret, and the turret decides which Mongtec tool holder fits. This page covers the M (live tooling), MS (live tooling, second spindle), MY (live tooling, Y-axis), MSY (live tooling, second spindle, Y-axis) builds.
Check the turret face against the interface shown on this page:
| Interface | What to check on the turret |
|---|---|
| BMT68 | Centre bore ø68 mm (the BMT number is the bore diameter). Machine-builder specific size: measure the bolt spacing as well. |
Count the turret stations, photograph the turret face and the machine serial plate, and email them with the model name. The interface for your machine is confirmed in Mongtec's formal quotation.
Mongtec supplies BMT and VDI (DIN 69880) driven tool holders and static tooling compatible with the Mazak turret platform. Interface: BMT. The exact configuration is confirmed by Mongtec engineering at RFQ.
Yes. BMT and VDI are open machine-side standards, so switching supplier does not require any turret modification. Mongtec also publishes cross-reference pages for WTO, Heimatec, EWS, Eppinger, BIG and other brands.
Lead time is quoted per order and ships from Taichung, Taiwan.
All 228 article numbers with full specification · How to choose a driven tool holder · PSC / ISO 26623 tooling
Machine builders regularly ship the same model with different turrets — station count, model suffix and the number of keys all change the mounting. The Hardinge Conquest H51 is BMT55 in the 12-station build and BMT45 in the 16-station build; the Okuma GENOS L300 M is VDI40, while the L300 MW/MYW uses a 65×73 mm bolt pattern. This is the single most common reason a driven tool holder arrives and will not bolt on. BMT bolt pattern reference — 38 patterns by machine builder →
Send your model and a photo of the turret face — we confirm the fit before quoting →
The turret interface for this machine is confirmed at RFQ, so no article number is published here. These are the driven tool types Mongtec publishes — which one fits is confirmed once the turret is identified.
BMT bolt pattern reference (38 patterns) · All driven tool types and turret interfaces