Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, supplies driven tool holders and static tooling for the Mazak Quick Turn Nexus 200 / 250 M/MY on the open machine-side BMT and VDI (DIN 69880) standards. The turret interface for this model is confirmed per machine configuration by Mongtec engineering at RFQ.
| Machine brand | Mazak |
|---|---|
| Model | Quick Turn Nexus 200 / 250 M/MY |
| Turret interface | BMT68 / VDI40 (possible interface, not confirmed for this exact model — the same model is built with different turrets. Email your enquiry with the machine model and a photo of the turret face; the interface is confirmed in Mongtec's formal quotation) |
| Driven tool line speed | 6,000–12,000 rpm standard (up to 32,000 rpm with speed increaser) |
| Max torque | Up to 160 Nm (line capability; unit rating confirmed at RFQ) |
| Coolant | Internal / external, up to 100 bar |
| Runout | ≤0.003 mm published for Mazak-compatible 0° driven tool line; other families confirmed at RFQ |
Mazak turret rule: 2-axis turning models (no live tooling) use a BOT bolt-on turret and take Mongtec bolt-on static holders. Live-tool models (M / MY / MS / MSY) use the BMT68 driven-tool turret; larger QT 300/350 12-station builds use BMT80. Mazak's VDI40 turret is a Mazak-specific clamping system — a standard VDI40 holder does not fit, but Mongtec supplies VDI40 holders to the Mazak interface. The same model can be built with a different turret, so this is a general rule, not a confirmed interface for your machine — email the machine model and a photo of the turret face; the interface is confirmed in Mongtec's formal quotation.
TOOL HOLDER SELECTION GUIDE Ver 2026.08 (PDF, 2.6 MB)
Models listed in this catalogue section: QTC/QTU 100-350 M,MY,MS,MSY / QT,QTS 100M,MY,MS,MSY / MZ 68 B,C / QT 200, 250 M,MY,MS,MSY,16D / QT,QTS 200, 250 M,MY,MS,MSY / QT-Ez 8-12 M,MY,MSY
| Article no. | Tool clamping | What it does on the machine |
|---|---|---|
| M07184 | 25 | Facing & face grooving |
| M33684 | 25.4 | Facing & face grooving |
| M02584 | Ø25.4 | Boring, U-drilling & ID grooving |
| M43684 | Ø25.4 | Boring, U-drilling & ID grooving |
| M27185 | Ø21 | Boring, U-drilling & ID grooving |
| M17185 | Ø31.75 | Boring, U-drilling & ID grooving |
| M96184 | Ø40 | Boring, U-drilling & ID grooving |
| M84284 | Ø38.1 | Boring, U-drilling & ID grooving |
| M58085 | 20 | OD turning, threading, parting & grooving |
| M07185 | 19.05 | OD turning, threading, parting & grooving |
| M47084 | 25 | OD turning, threading, parting & grooving |
| M23684 | 25.4 | OD turning, threading, parting & grooving |
| M76084 | 25 | OD turning, threading, parting & grooving |
| M13684 | 25.4 | OD turning, threading, parting & grooving |
| M30385 | SH32 | OD turning, threading, parting & grooving |
| M1018 | ER32 | Axial (0°) drilling & milling |
| M2018 | ER32 | Radial (90°) face drilling & milling |
Article numbers shown as links have a specification page with the catalogue drawing. The rest are published in the Mongtec selection guide; Mongtec confirms the final article number against your turret drawing at RFQ.
Mongtec also supplies BMT40, BMT60, BMT68 and BMT80 holders and builder-specific interfaces (Mazak, Nakamura-Tome, Haas BOT, Okuma BOT, Muratec BOT) — the 228 article numbers published here are a subset of the range. Mongtec tooling is exported to five continents and supplied to machine-tool builders. Lead time is confirmed per item and quantity at quotation.
Request a quote for this machine
Mongtec supplies BMT and VDI (DIN 69880) driven tool holders and static tooling compatible with the Mazak turret platform. Interface: BMT68 / VDI40 (to be confirmed in Mongtec's formal quotation); VDI40 on 12-station builds also reported. The exact configuration is confirmed by Mongtec engineering at RFQ.
Yes. BMT and VDI are open machine-side standards, so switching supplier does not require any turret modification. Mongtec also publishes cross-reference pages for WTO, Heimatec, EWS, Eppinger, BIG and other brands.
Lead time is quoted per order and ships from Taichung, Taiwan.
A selection of Mongtec VDI40 driven tool holder article numbers. This is a starting point, not a confirmed fit — the exact turret drawing is verified at RFQ. See all 75 VDI40 article numbers →
| Article no. | Orientation | Collet | Max speed | Torque |
|---|---|---|---|---|
| M0726 | Axial | — | 5,000 rpm | 70 Nm |
| M0926 | Axial | ER32 | 5,000 rpm | 70 Nm |
| M1126 | Axial | ER32 | 5,000 rpm | 70 Nm |
| M0126 | Radial | ER32 | 5,000 rpm | 70 Nm |
| M0166 | Radial | ER32 | 8,000 rpm | 20 Nm |
| M0326 | Radial | ER32 | 5,000 rpm | 70 Nm |
All 228 article numbers with full specification · How to choose a driven tool holder · PSC / ISO 26623 tooling
Machine builders regularly ship the same model with different turrets — station count, model suffix and the number of keys all change the mounting. The Hardinge Conquest H51 is BMT55 in the 12-station build and BMT45 in the 16-station build; the Okuma GENOS L300 M is VDI40, while the L300 MW/MYW uses a 65×73 mm bolt pattern. This is the single most common reason a driven tool holder arrives and will not bolt on. BMT bolt pattern reference — 38 patterns by machine builder →
Send your model and a photo of the turret face — we confirm the fit before quoting →
Whether a holder mounts is decided by the turret bolt pattern and the drive coupling, not by the machine name alone. The types below are published by Mongtec for this interface; the exact article number is confirmed against the actual turret drawing at RFQ.
VDI40 article numbers · BMT bolt pattern reference (38 patterns) · All driven tool types and turret interfaces