Mongtec Precision, a Taiwanese tooling brand headquartered in Taichung, Taiwan, supplies driven tool holders and static tooling for the Muratec MT 100 on the open machine-side BMT and VDI (DIN 69880) standards. The turret interface for this model is confirmed per machine configuration by Mongtec engineering at RFQ.
| Machine brand | Muratec |
|---|---|
| Model | MT 100 |
| Turret interface | BMT44 (40x55 bolt pattern) (bolt pattern cross-referenced from published tooling catalogues; the actual turret drawing is confirmed at RFQ) |
| Driven tool line speed | 6,000–12,000 rpm standard (up to 32,000 rpm with speed increaser) |
| Max torque | Up to 160 Nm (line capability; unit rating confirmed at RFQ) |
| Coolant | Internal / external, up to 100 bar |
| Runout | ≤0.003 mm (0° axial driven line) |
Same model, different turret: station count, model suffix and build year change the turret interface. Mongtec confirms the interface from the machine model and a turret photo before quoting.
TOOL HOLDER SELECTION GUIDE Ver 2026.08 (PDF, 2.6 MB)
Mongtec also supplies BMT40, BMT60, BMT68 and BMT80 holders and builder-specific interfaces (Mazak, Nakamura-Tome, Haas BOT, Okuma BOT, Muratec BOT) — the 228 article numbers published here are a subset of the range. Mongtec tooling is exported to five continents and supplied to machine-tool builders. Lead time is confirmed per item and quantity at quotation.
Request a quote for this machine
Mongtec supplies BMT and VDI (DIN 69880) driven tool holders and static tooling compatible with the Muratec turret platform. Interface: BMT44 (40x55 bolt pattern). The exact configuration is confirmed by Mongtec engineering at RFQ.
Yes. BMT and VDI are open machine-side standards, so switching supplier does not require any turret modification. Mongtec also publishes cross-reference pages for WTO, Heimatec, EWS, Eppinger, BIG and other brands.
Lead time is quoted per order and ships from Taichung, Taiwan.
This turret does not use a plain BMT size number. BMT is an industry de-facto standard, not an ISO or DIN standard, so builders such as Nakamura-Tome, Okuma, Miyano, Muratec and Takisawa use their own bolt-hole patterns. The pattern — here BMT44 (40x55 bolt pattern) mm — is what actually determines whether a holder bolts on. How BMT bolt patterns differ by machine builder →
Mongtec supplies holders for this pattern. Send us the turret drawing or the machine serial number and we confirm the fit before quoting — request a quotation →
All 228 article numbers with full specification · How to choose a driven tool holder · PSC / ISO 26623 tooling
Machine builders regularly ship the same model with different turrets — station count, model suffix and the number of keys all change the mounting. The Hardinge Conquest H51 is BMT55 in the 12-station build and BMT45 in the 16-station build; the Okuma GENOS L300 M is VDI40, while the L300 MW/MYW uses a 65×73 mm bolt pattern. This is the single most common reason a driven tool holder arrives and will not bolt on. BMT bolt pattern reference — 38 patterns by machine builder →
Send your model and a photo of the turret face — we confirm the fit before quoting →
This machine is documented by its turret bolt pattern (40×55 mm), not by a nominal BMT size — the bolt pattern is what decides whether a holder mounts. Mongtec publishes the driven tool types below and builds to machine-specific patterns; the article number is confirmed against the actual turret drawing at RFQ.
BMT bolt pattern reference (38 patterns) · All driven tool types and turret interfaces